EVGA

Helpful ReplyEVGA GeForce RTX 3090 FTW3 XOC BIOS

Page: << < ..201202203204205.. > >> Showing page 203 of 240
Author
Post
Essentials Only Full Version
555WarDaddy555
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2004/07/17 17:24:10
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/04 12:15:03 (permalink)
lobstar
Mine was full retail brand new in box. Since it's a revised board I imagine not a lot have made it into the refurb channels.

Good point, I better get cracking
#6061
mongo94
New Member
  • Total Posts : 82
  • Reward points : 0
  • Joined: 2009/03/02 13:30:21
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/04 13:15:01 (permalink)
Ok I got my replacement card brand new unopened.  I had a Serial 2114 with Samsung memory,  I got back a 2114 with Micron memory.
 
Ok got a question I put it in and reinstalled drivers and restarted.   When I get to desktop Precision ask to flash my card,  Should I do this?
For now I just closed precision and did the same over clock with Afterburner that I did with the first card  (+100/+1000) on Overclock bios.
The card pulled 470 max power and the 3rd 8 pin was about 50w behind pins 1&2 and Port Royal was alittle above 14k with PCI @ 66w.
 
#6062
HeinzNeu
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2013/04/06 10:45:28
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 08:46:18 (permalink)
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?

 
The VGA-BIOS Version is 94.02.42.80.27.

AMD 5950X@EK-Monoblock@ ASUS Crosshair VIII Hero|EVGA FTW3 Ultra Gaming 3090 @H²O_EK_Waterblock H²O@Mo-Ra3|Corsair AV860W|4*8 GB G.Skill@3800 MHz@16-16-16 |Gigabyte Aorus NVMe Gen4| Cooler Master CoSmoS II |LG UltraGear 38GL950G-B, 37.5" |Win 10 Prof. 64 bit
#6063
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6801
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 77
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 08:57:28 (permalink)
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?
 
 
The VGA-BIOS Version is 94.02.42.80.27.




 

EVGA_JacobF
Thanks for clarifying Jacob, and you are confident that all of the RMA cards that will start shipping in a week will have fully resolved the underlying power balance issue? Also will you be allowing a second RMA for any that still experience the issue with the replacement cards?



If second RMA is needed we can work on a case by case basis, but I would be very surprised if a second would be needed for this particular symptom. Of course if anything else were to go wrong the card has full warranty.

#6064
Bepzinky
iCX Member
  • Total Posts : 281
  • Reward points : 0
  • Joined: 2016/04/30 13:15:31
  • Status: offline
  • Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 10:29:42 (permalink)
Sell it and wait for the 3080Ti?
I wouldn't bother anymore, considering the waiting time.
I got a replacement 3090 but it would get stuck at 470-480 max on it's OC BIOS.
With 520W KP BIOS it can pull 520 with ease but what about it if the fan controls are broken on the stock aircooler? Even with custom curves, the fans all spin differently.
post edited by Bepzinky - 2021/05/05 10:33:00
#6065
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:05:09 (permalink)
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?

 
The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


#6066
adsmamba
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2021/03/22 16:08:02
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:10:57 (permalink)
Il y a des français ici?
#6067
HeinzNeu
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2013/04/06 10:45:28
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:21:44 (permalink)
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?

 
 
The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 
post edited by HeinzNeu - 2021/05/05 11:23:52

AMD 5950X@EK-Monoblock@ ASUS Crosshair VIII Hero|EVGA FTW3 Ultra Gaming 3090 @H²O_EK_Waterblock H²O@Mo-Ra3|Corsair AV860W|4*8 GB G.Skill@3800 MHz@16-16-16 |Gigabyte Aorus NVMe Gen4| Cooler Master CoSmoS II |LG UltraGear 38GL950G-B, 37.5" |Win 10 Prof. 64 bit
#6068
elbramso
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2021/01/31 22:31:39
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:35:07 (permalink)
HeinzNeu
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?

 
 
The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 

On nooo!
I'll receive my replacement tomorrow, serial number starts with 2112, so it's possible that this card won't do the trick :-(

RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
#6069
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:45:26 (permalink)
elbramso
HeinzNeu
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?

 
 
The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 

On nooo!
I'll receive my replacement tomorrow, serial number starts with 2112, so it's possible that this card won't do the trick :-(






Thats exactly, why i canceled my "special RMA"...








#6070
elbramso
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2021/01/31 22:31:39
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 11:50:11 (permalink)
Lord Winchester
elbramso
HeinzNeu
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?



The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 

On nooo!
I'll receive my replacement tomorrow, serial number starts with 2112, so it's possible that this card won't do the trick :-(






Thats exactly, why i canceled my "special RMA"...







Well I guess I have to test the card before I put on the waterblock

RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
#6071
ramsito82
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2018/11/23 02:40:24
  • Location: Spain
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 13:41:41 (permalink)
I am very happy with my card coming from the special rma, I can even do undervolt 1,025 2100mhz totally stable over the air.

In port royal + of 15200 points, pci does not consume more than 66w with the 500w xoc bios, for me the change has been very beneficial, serial 2112.


 
#6072
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 15:03:02 (permalink)
ramsito82
I am very happy with my card coming from the special rma, I can even do undervolt 1,025 2100mhz totally stable over the air.

In port royal + of 15200 points, pci does not consume more than 66w with the 500w xoc bios, for me the change has been very beneficial, serial 2112.




 
And where are you from? 


#6073
orez-bus
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2020/11/20 05:48:12
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 15:32:06 (permalink)
warbucks81Correct. With the XOC bios that ships with the card.  I may throw the KPE bios on it and test some benchmarks to compare.

 
ramsito82I am very happy with my card coming from the special rma, I can even do undervolt 1,025 2100mhz totally stable over the air.
In port royal + of 15200 points, pci does not consume more than 66w with the 500w xoc bios, for me the change has been very beneficial, serial 2112.



Would you both mind posting the bios revisions you're running with success?  My card is a 2114 that seems limited to 465w and is down ~50w on the third VGA power connector but does not seem to run out of spec on PCIe.   I would like to try both your firmwares to see if they fix my problem.
ramsito82, what was your board power draw during that 15200 PR run? It could just be yours is a great overclocker.
post edited by orez-bus - 2021/05/05 15:33:50
#6074
ramsito82
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2018/11/23 02:40:24
  • Location: Spain
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 16:09:37 (permalink)
 
@lord winchester, I am from Spain.
 
@orez-bus:
 
bios galax 1000w  https://www.3dmark.com/pr/1015605
bios kingpin 520w  https://www.3dmark.com/pr/1015143
Bios Xoc 500w   https://www.3dmark.com/pr/1015117
 
The maximum consumption in port royal with the best score has been 534w with a maximum in the pci of 68w
Attached capture of the bios xoc 500w with bar that I use daily after passing port royal.
 
 
 
 
 
 
 
 
 
post edited by ramsito82 - 2021/05/05 16:32:14

Attached Image(s)



 
#6075
koroem
Superclocked Member
  • Total Posts : 120
  • Reward points : 0
  • Joined: 2008/11/04 22:02:33
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 17:38:15 (permalink)
Did any one with serial 2114 report good results with their replacement?

Asus Maximus Hero XI wifi / Intel Core i9 9900k @ 5.2 / EVGA RTX 3090 FTW3 Ultra (RMAed "fixed" version)
16GB G.Skill 3200 cl14 / 2x Samsung NVME evo 970 1TB
Be Quiet Dark Power Pro 12 1500w
Caselabs Magnum TH10
#6076
yangning8109
New Member
  • Total Posts : 32
  • Reward points : 0
  • Joined: 2020/12/23 14:46:43
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 20:23:59 (permalink)
koroem
Did any one with serial 2114 report good results with their replacement?

My 2114 card from special RMA got PR 14800 with air cooling.
#6077
lobstar
Superclocked Member
  • Total Posts : 208
  • Reward points : 0
  • Joined: 2007/03/05 13:08:02
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 21:13:12 (permalink)
koroem
Did any one with serial 2114 report good results with their replacement?

Yes, just look a few pages back for my results.  
I'm able to hold 2250mhz and +1548 mem on my overclock.
https://www.3dmark.com/pr/1019273

post edited by lobstar - 2021/05/05 21:15:26

 
#6078
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 23:10:19 (permalink)
ramsito82
 
@lord winchester, I am from Spain.
 
 




 
Thanks.
So we have a good card coming from the German RMA😅


#6079
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/05 23:16:00 (permalink)
elbramso
Lord Winchester
elbramso
HeinzNeu
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?



The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 

On nooo!
I'll receive my replacement tomorrow, serial number starts with 2112, so it's possible that this card won't do the trick :-(






Thats exactly, why i canceled my "special RMA"...







Well I guess I have to test the card before I put on the waterblock



 
Honestly, you shouldn't even bother putting the block on...
 
 
Send that piece of.... back to evga.
 
Someone in their German warehouse seems to incompetent to differ from "normal" and "special" rma..
 
Of course, before you send it back, let them know about it to get a new special rma number.
 
And maybe tell them, that evga Germany screwed up (again) 


#6080
elbramso
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2021/01/31 22:31:39
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 00:33:47 (permalink)
Lord Winchester
elbramso
Lord Winchester
elbramso
HeinzNeu
Lord Winchester
HeinzNeu
Today I ve got my replacement with the very same PCIe-bug.
The performance is worse too. What am I supposed to do?



The VGA-BIOS Version is 94.02.42.80.27.




Did you do the RMA via EVGA Germany?


Yes, I did. 
I am pretty upset having the same bug again. I told the the rma department before shipping about the faulty voltage controller and begged them not to send me another faulty card. They told me that the problem is known, I shouldn't worry.  
Now I am into a send-receive-send-carousel. 

On nooo!
I'll receive my replacement tomorrow, serial number starts with 2112, so it's possible that this card won't do the trick :-(






Thats exactly, why i canceled my "special RMA"...







Well I guess I have to test the card before I put on the waterblock



 
Honestly, you shouldn't even bother putting the block on...
 
 
Send that piece of.... back to evga.
 
Someone in their German warehouse seems to incompetent to differ from "normal" and "special" rma..
 
Of course, before you send it back, let them know about it to get a new special rma number.
 
And maybe tell them, that evga Germany screwed up (again) 



Ok, I couldnt help myself so I called the evga europe support.
The person on the phone told me that he can see that I'll receive a special rma card with new pcb. He actually insured this.
 

RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
#6081
Lord Winchester
Superclocked Member
  • Total Posts : 222
  • Reward points : 0
  • Joined: 2017/12/25 16:49:25
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 02:15:42 (permalink)
elbramso
 

Ok, I couldnt help myself so I called the evga europe support.
The person on the phone told me that he can see that I'll receive a special rma card with new pcb. He actually insured this.
 




 
What's the power limit with the bios switch set to OC? 


#6082
elbramso
Superclocked Member
  • Total Posts : 192
  • Reward points : 0
  • Joined: 2021/01/31 22:31:39
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 02:24:30 (permalink)
Lord Winchester
elbramso
 

Ok, I couldnt help myself so I called the evga europe support.
The person on the phone told me that he can see that I'll receive a special rma card with new pcb. He actually insured this.
 




 
What's the power limit with the bios switch set to OC? 


can't tell because my card is waiting at home while I'm sitting at work :(



RTX 3090 K|NGP|N OPTIMUS BLOCK, 10900K on Z490 MAXIMUS HERO, 32GB DDR4 3200@3800, Custom loop: 2x 560 + 480 rads, dual pump
#6083
Bepzinky
iCX Member
  • Total Posts : 281
  • Reward points : 0
  • Joined: 2016/04/30 13:15:31
  • Status: offline
  • Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 03:50:10 (permalink)
yangning8109
koroem
Did any one with serial 2114 report good results with their replacement?

My 2114 card from special RMA got PR 14800 with air cooling.


Please do mention that it's overclocked. A stock 3090 FTW3 on air won't even do 14.000.
#6084
Dasoa
New Member
  • Total Posts : 87
  • Reward points : 0
  • Joined: 2020/11/05 12:44:45
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 04:42:09 (permalink)
Finally I received after a second attempt a "real" card of the program 0c3090.
It goes up between 485 500w and the pciexpress port between 65 68 w.
It was long and painful in getting one!
Thanks evga.
#6085
lucasfrance
New Member
  • Total Posts : 73
  • Reward points : 0
  • Joined: 2014/07/30 21:16:52
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 04:45:20 (permalink)
NEVER EVER WILL I BUY EVGA AGAIN!!! THIS COMPANY IS A COMPLETE MESS!!!
post edited by lucasfrance - 2021/05/06 05:30:12
#6086
spider1701
Superclocked Member
  • Total Posts : 135
  • Reward points : 0
  • Joined: 2010/05/22 17:18:02
  • Status: offline
  • Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 05:43:40 (permalink)
just quick question for you who successfully completed RMA.
What version of vBIOS you have in OC and non OC position?
 
I currently have this in non OC bios (94.02.42.80.AD) and actually low power draw from 3th 8pin PCIE
 
post edited by spider1701 - 2021/05/06 05:49:43


#6087
Bepzinky
iCX Member
  • Total Posts : 281
  • Reward points : 0
  • Joined: 2016/04/30 13:15:31
  • Status: offline
  • Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 05:53:21 (permalink)
Dasoa
Finally I received after a second attempt a "real" card of the program 0c3090.
It goes up between 485 500w and the pciexpress port between 65 68 w.
It was long and painful in getting one!
Thanks evga.


Yes, this is OK. My RMA card with SN2112xxx was perfect, 55-60W PCI-E draw maximum, could pull up to 534W on the 520W KP BIOS but I sold it, done with EVGA cards and Ampere for the time being. I'm now using a 1060 3GB which is plenty.
The XOC 500W VBIOS is still janky, 450-470W with the slider at max and in OC position..which should've been the XOC 500W BIOS according to EVGA, not good since the KP BIOS can't control the FTW3 fans properly, even with custom curves the RPM is way off.
post edited by Bepzinky - 2021/05/06 05:57:53
#6088
lucasfrance
New Member
  • Total Posts : 73
  • Reward points : 0
  • Joined: 2014/07/30 21:16:52
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA 2021/05/06 07:53:41 (permalink)
NEVER EVER WILL I BUY EVGA AGAIN!!! THIS COMPANY IS A COMPLETE MESS!!!
- Not only they deliver HIGH END (and VERY EXPENSIVE) 3090 FTW3 ULTRA boards out of power consumption standard specs due to a very poor and low cost HW design moreover not properly tested...
but !
- Their European Consumer support is a COMPLETE MESS !!! They are even not able to handle the RMA properly and my parcel is sucked at the German entry customs for many days waiting for EVGA Europe paperwork acceptance !!!!
NEVER EVER WILL I BUY EVGA AGAIN!!! 
#6089
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS 2021/05/06 09:13:36 (permalink)
EVGA_JacobF
Important update 3/19/21:
Newer EVGA GeForce RTX 3090 FTW3 ULTRA cards will be shipping with the XOC BIOS already loaded on the secondary position. The below BIOS should ONLY be installed if your card DID NOT already have it applied.
 
Snip...

Any update on the addition of hybrid cards to the 3090oc rma?

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#6090
Page: << < ..201202203204205.. > >> Showing page 203 of 240
Jump to:
  • Back to Mobile