arcanexvi
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/10/15 12:48:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/01 07:39:40
(permalink)
Jsunn
Sent EVGA an email to the address listed in the second post.
Thank you again for your help. We'll see what happens.
Update, looks like my card is eligible for RMA.
Does anyone know what the turnaround time is? They stated that cross shipping wasn't possible for this RMA unfortunately.
-J
It really depends how fast you send it to them. If you're in the US, the turnaround time from them receiving it to shipping my card was 3 business days. Then it's just transit time to them and from them depending on what shipping speed you utilized.
|
555WarDaddy555
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2004/07/17 17:24:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/01 19:28:14
(permalink)
So for those with high pci-e slot power draw but no balancing issues, here what evga tech support said:
"Thank you for reaching out. A PCI-e slot power draw of 75-80w is totally normal. If you were seeing something like 85-90w from the PCI-e power draw, it'd be more of a cause for concern. It seems like your card is performing within spec and wouldn't need an RMA. If you have any further questions or concerns, please feel free to reach out again."
So I may try pushing the card to see if it gets about 85w. I have an optimus block for it but don't want to install it unless I know the card is good to go. Thoughts?
|
lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/01 20:11:43
(permalink)
555WarDaddy555
So for those with high pci-e slot power draw but no balancing issues, here what evga tech support said:
"Thank you for reaching out. A PCI-e slot power draw of 75-80w is totally normal. If you were seeing something like 85-90w from the PCI-e power draw, it'd be more of a cause for concern. It seems like your card is performing within spec and wouldn't need an RMA. If you have any further questions or concerns, please feel free to reach out again."
So I may try pushing the card to see if it gets about 85w. I have an optimus block for it but don't want to install it unless I know the card is good to go. Thoughts?
That seems a bit sus. These were the screens I sent them and I was approved almost immediately. 
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6801
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 77
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/01 20:14:40
(permalink)
The PCIE spec is 75W max. GPU-Z reads 12V only and not 12V plus 3.3V wattage, PCIE slot power is the 12V wattage plus the 3.3V wattage. Properly functioning (stock) cards pull ~67W max as read by GPU-Z (12V only, no 3.3V), which leaves ~8W not read for 3.3V power. Cards that read >75W power draw in GPU-Z are actually pulling >83W as the ~8W from 3.3V isn't accounted for. Make sure to let them know that you know that they're lying to you when you report this to the Better Business Bureau / let Gamer's Nexus know about it (maybe offer your card up for them to test if you can live without it for a bit). Small claims court may be an option as well - but you'll have to look into it to see if it's worth it over selling your EVGA card and never purchasing from them again.
post edited by arestavo - 2021/05/01 20:16:05
|
ckelas
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 2016/08/05 13:34:32
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/02 07:00:44
(permalink)
Hi guys, I recently shipped my card to EVGA UK Langdale, Flag Lane Penwortham, Preston Lancashire PR1 9TP UK as part of the special RMA programme.
This address was provided in the email EVGA sent me and I used it as an alternative to the address in Germany as the latter was ineligible in the pdf EVGA sent me.
Now EVGA is telling me they are yet to see it in the system.
Has anybody had any issues with this address in the UK?
Has anybody used it?
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/02 13:58:15
(permalink)
lobstar
555WarDaddy555
So for those with high pci-e slot power draw but no balancing issues, here what evga tech support said:
"Thank you for reaching out. A PCI-e slot power draw of 75-80w is totally normal. If you were seeing something like 85-90w from the PCI-e power draw, it'd be more of a cause for concern. It seems like your card is performing within spec and wouldn't need an RMA. If you have any further questions or concerns, please feel free to reach out again."
So I may try pushing the card to see if it gets about 85w. I have an optimus block for it but don't want to install it unless I know the card is good to go. Thoughts?
That seems a bit sus. These were the screens I sent them and I was approved almost immediately.
Same and mine was even lower than that, approved after 1 screenshot.
|
andressergio
iCX Member
- Total Posts : 272
- Reward points : 0
- Joined: 2007/08/20 10:13:12
- Location: Uruguay
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/02 14:57:19
(permalink)
lobstar
andressergio
Are you able to sustain a locked boost with no jumps aside from the PCIe Slot draw?
https://www.3dmark.com/3dm/61079326
https://www.3dmark.com/pr/1012460
During these benchmarks the card usually starts at it's boost clock and very quickly drops one bin (in this case 2235 from 2250mhz). If I remember in this particular run the it did drop another 15 mhz somewhere along the line for a very short time and continued again at the 2235mhz.
I received a 2114 from the US 3090OC program. I'm running the KPE520w Bios. The card is watercooled.
Thanks for your reply bro! All the Best, Sergio
Intel Core i9-7980XE 4.8GHz 18C/18TH DDCASRock X299 OC FormulaXPG D60G (4x8GB) DDR4-3800C16 B-Die 1x Intel Optane SSD 905P 480GB U23x Sabrent ROCKET NVME 4TB SSD3x HP EX950 2TB NVME 2TB SSDEVGA RTX 3090 FTW3 ULTRA Gaming PCB rev 1.0 Alphacool Custom Water Cooling PartsSilverStone ST1500-TI TITANIUM Fully Modular PSUAcer Predator X38 3840x1600 175Hz NVIDIA G-SYNCBenchtable Windows 10 64 Bit Pro Version 21H1 Build 19043.1288EVGA PX1 v1.2.6 & NVIDIA Drivers 496.49
|
rjbarker
CLASSIFIED Member
- Total Posts : 2361
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/02 17:27:08
(permalink)
arestavo
WOOOOOOOOOO! Testing now.
EDIT to consolidate some information about RMAing the 3090 FTW3 Ultra for those with power load balancing issues (low overall power draw, even on the 500W XOC VBIOS):
EVGA_JacobF
Hi everyone,
We have an update regarding the EVGA GeForce RTX 3090 FTW3 ULTRA (24G-P5-3987-KR). If you have this specific card and are using the XOC BIOS BETA update and not seeing ideal overclocking results please send an email to 3090OC@evga.com for more details. Please make sure your card is registered first, and if you have screenshots of your max wattage under load and list of applications/games used this will help as well when emailing.
Thanks,
EVGA
EVGA_JacobF
If you had an RMA before that post, it is not a part of this new card replacement program procedure. The cards in this new program will not START shipping until next week in US.
EVGA_JacobF
andressergio
EVGA_JacobF
If you had an RMA before that post, it is not a part of this new card replacement program procedure. The cards in this new program will not START shipping until next week in US.
Jaboc how will be outside US? I live in Uruguay South America and bought it in the Official EVGA Distributor here, I can't send it from here to US as Customs Rules and to recieve it Customs will charge me ALL the taxes like a new card, there's no way of doing this direct to US for that I'm asking. Thank You!
It will ship from the closest region when the product is available, you can send a mail to 3090oc@evga.com to set it up.
EVGA_JacobF
cerealkeller
I never RMA’d my card but I’m not happy with it as is due to the power balancing issues with the PCIE and 8 pin #3 for me. Can I RMA my card for one of the new ones?
Yes, send a mail to 3090oc@evga.com
EVGA_JacobF
Thanks for clarifying Jacob, and you are confident that all of the RMA cards that will start shipping in a week will have fully resolved the underlying power balance issue? Also will you be allowing a second RMA for any that still experience the issue with the replacement cards?
If second RMA is needed we can work on a case by case basis, but I would be very surprised if a second would be needed for this particular symptom. Of course if anything else were to go wrong the card has full warranty.
EVGA_JacobF
Luigi408
Hi @EVGA_JacobF, will this expand later on to cover the 3090 Hybrid Ultras as well? Just wondering if us 3090 Hybrid Ultra owners will eventually be covered. My guess it will take some time to get the final product out with the fixes + hybrid not being as popular as the regular cards doesn’t help either. Thanks.
It will expanding to include all 3090 "FTW3" cards. HYBRID, HC, etc.
Just curious guys is the process also in place for 3080FTW3 Ultras with Power Balancing issues (1/2 power on PCI-E #3 plu)....I';ll go check out that Thread but please confirm yay or nay if possible....cheers
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
rjbarker
CLASSIFIED Member
- Total Posts : 2361
- Reward points : 0
- Joined: 2008/03/20 10:07:05
- Location: Vancouver Isle - Westcoast Canada
- Status: offline
- Ribbons : 21
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/02 17:27:24
(permalink)
arestavo
WOOOOOOOOOO! Testing now.
EDIT to consolidate some information about RMAing the 3090 FTW3 Ultra for those with power load balancing issues (low overall power draw, even on the 500W XOC VBIOS):
EVGA_JacobF
Hi everyone,
We have an update regarding the EVGA GeForce RTX 3090 FTW3 ULTRA (24G-P5-3987-KR). If you have this specific card and are using the XOC BIOS BETA update and not seeing ideal overclocking results please send an email to 3090OC@evga.com for more details. Please make sure your card is registered first, and if you have screenshots of your max wattage under load and list of applications/games used this will help as well when emailing.
Thanks,
EVGA
EVGA_JacobF
If you had an RMA before that post, it is not a part of this new card replacement program procedure. The cards in this new program will not START shipping until next week in US.
EVGA_JacobF
andressergio
EVGA_JacobF
If you had an RMA before that post, it is not a part of this new card replacement program procedure. The cards in this new program will not START shipping until next week in US.
Jaboc how will be outside US? I live in Uruguay South America and bought it in the Official EVGA Distributor here, I can't send it from here to US as Customs Rules and to recieve it Customs will charge me ALL the taxes like a new card, there's no way of doing this direct to US for that I'm asking. Thank You!
It will ship from the closest region when the product is available, you can send a mail to 3090oc@evga.com to set it up.
EVGA_JacobF
cerealkeller
I never RMA’d my card but I’m not happy with it as is due to the power balancing issues with the PCIE and 8 pin #3 for me. Can I RMA my card for one of the new ones?
Yes, send a mail to 3090oc@evga.com
EVGA_JacobF
Thanks for clarifying Jacob, and you are confident that all of the RMA cards that will start shipping in a week will have fully resolved the underlying power balance issue? Also will you be allowing a second RMA for any that still experience the issue with the replacement cards?
If second RMA is needed we can work on a case by case basis, but I would be very surprised if a second would be needed for this particular symptom. Of course if anything else were to go wrong the card has full warranty.
EVGA_JacobF
Luigi408
Hi @EVGA_JacobF, will this expand later on to cover the 3090 Hybrid Ultras as well? Just wondering if us 3090 Hybrid Ultra owners will eventually be covered. My guess it will take some time to get the final product out with the fixes + hybrid not being as popular as the regular cards doesn’t help either. Thanks.
It will expanding to include all 3090 "FTW3" cards. HYBRID, HC, etc.
Just curious guys is the process also in place for 3080FTW3 Ultras with Power Balancing issues (1/2 power on PCI-E #3 plu)....I';ll go check out that Thread but please confirm yay or nay if possible....cheers
I9 12900K EK Velocity2 / ROG Z690 Apex/ 32G Dominator DDR5 6000/ Evga RTX 3080Ti FTW3 EK Vector / 980 Pro 512G / 980 Pro 1TB/ Samsung 860 Pro 500G/ WD 4TB Red / AX 1600i / Corsair 900D & XSPC 480 * 360 * 240 Rads XSPC Photon 170 Rez-Vario Pump Combo - Alienware 3440*1440p 120Hz/ W11
|
aliop1
Superclocked Member
- Total Posts : 237
- Reward points : 0
- Joined: 2021/03/16 10:34:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:28:03
(permalink)
So far, how many people have gotten a (new) card that is out of PCIe spec or has unbalanced power draw from 1 & 2? Trying to gauge how widespread the issue is in new batches since I believe there was a hardware revision and a vbios revision, but correct me if I’m wrong.
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:31:50
(permalink)
I am having less power draw from the 8 pin. I am trying to figure out why my card keeps maxing out a 467W.
|
willm1224
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2020/09/19 18:56:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:33:55
(permalink)
DarthSawyers
I am having less power draw from the 8 pin. I am trying to figure out why my card keeps maxing out a 467W.
If you Use nvflash to put the originals card 500w bios on it, you can get 500w by it going up to 165-170w from the first 2 8 pins with 110 on the the 3rd. Pcie stays in spec at 67 w.
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:47:23
(permalink)
None of the BIOS will flash to my card from this forum.
|
willm1224
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2020/09/19 18:56:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:50:21
(permalink)
DarthSawyers
None of the BIOS will flash to my card from this forum.
You’d have to use nvflash and get the bios from techpowerup: https://www.techpowerup.com/vgabios/ but I seriously suggest you read some guides on it because its a dos utility and you should use it to make a backup and you need the commands.
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:52:55
(permalink)
willm1224
DarthSawyers
None of the BIOS will flash to my card from this forum.
You’d have to use nvflash and get the bios from techpowerup: https://www.techpowerup.com/vgabios/
but I seriously suggest you read some guides on it because its a dos utility and you should use it to make a backup and you need the commands.
I will try. I am going to reach out to tech support first.
|
warbucks81
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2013/06/05 18:38:24
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 14:59:42
(permalink)
Quick update, got my new card through the swap program (USA) on Friday. I hit 500W no problem now and PCIE stays below 66W Clocks are way more stable with this card.
|
Jsunn
Superclocked Member
- Total Posts : 204
- Reward points : 0
- Joined: 2007/05/06 17:01:05
- Status: offline
- Ribbons : 2
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 15:28:43
(permalink)
warbucks81
Quick update, got my new card through the swap program (USA) on Friday. I hit 500W no problem now and PCIE stays below 66W Clocks are way more stable with this card.
That is great to hear. I just sent mine back today. Hopefully everything will go well and I'll get my replacement card in a week or so.
|
dlomond
New Member
- Total Posts : 96
- Reward points : 0
- Joined: 2016/05/21 09:33:20
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 15:45:46
(permalink)
Evga just got mind so I will report back when I get the new one
Lian Li O11 Dynamic XL Gigabyte X570 Master Ryzen 9 5900X G.SKILL TridentZ RGB Series 32GB DDR4 3600 (F4-3600C16D-32GTZR) EVGA GeForce RTX 3090 FTW3 ULTRA HYBRID GAMING 970 EVO NVMe M.2 PCIe 2TB 960 EVO NVMe M.2 PCIe 250GB Samsung 840 Pro Series 512GB SSD Samsung 850 Pro Series 512GB SSD 6TB IronWolf HDD, SATA III H150i RGB PRO XT 360mm Radiator Extreme Liquid Cooler Creative Sound Blaster ZxR PCIe Sound Card Corsair AX1200 Power Supply LL120 RGB 120mm Dual Light Loop White RGB LED PWM Fan ( 9 Fans) iCUE Commander PRO Predator XB271HU 27in Widescreen IPS LED LCD w/ G-SYNC Siberia v2 CS:GO Edition Headset Creative Inspire 5.1 5300 speakers Razer BlackWidow Chroma V2 (Razer Green Keys) Razer Lancehead Tournament Edition Windows10 Pro Version 20H2
|
orez-bus
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2020/11/20 05:48:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 16:11:41
(permalink)
warbucks81
Quick update, got my new card through the swap program (USA) on Friday. I hit 500W no problem now and PCIE stays below 66W Clocks are way more stable with this card.
Great news. This is with the stock FTW3 XOC bios?
|
aliop1
Superclocked Member
- Total Posts : 237
- Reward points : 0
- Joined: 2021/03/16 10:34:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 16:39:40
(permalink)
Great news. Seems to be much less widespread than I initially thought, or maybe the hardware revision did work. 🤷♂️
|
willm1224
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2020/09/19 18:56:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 17:55:54
(permalink)
aliop1
Great news. Seems to be much less widespread than I initially thought, or maybe the hardware revision did work. 🤷♂️
I was initially power locked at 465 w on the new card with pcie 65 w & 2 8 pins at 150 w 3rd 8 pin at 110w. Flashing the original XOC 500w beta bios on the card gets 500w no problem, pcie 67 w 2 8 pins 165-170 w 3rd 8 pin 110w. The problem still exists I’m bypassing it, but the card doesn’t care where it’s getting power. Pcie is great and those cables are rated for 216-288 w so it’s a good move for me. I’m not on a full waterblock (just hybrid kit) so I can’t use the kingpin 520w bios but I’ve heard it pulls 520 no problem on these cards.
|
555WarDaddy555
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2004/07/17 17:24:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 18:08:12
(permalink)
lobstar
555WarDaddy555
That seems a bit sus. These were the screens I sent them and I was approved almost immediately.
So I was able to get a screen shot with the power balancing issue showing by running port royal. They say I'm eligible but couldn't guarantee that the replacement card would be a new retail boxed card. Kind of hesitant to pull the trigger now. Has anyone else who's going through the program received a refurbished card? I remember reading a couple posts that said they got new sealed retail boxes. TIA
|
willm1224
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2020/09/19 18:56:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 18:09:28
(permalink)
555WarDaddy555
lobstar
555WarDaddy555
That seems a bit sus. These were the screens I sent them and I was approved almost immediately.
So I was able to get a screen shot with the power balancing issue showing by running port royal. They say I'm eligible but couldn't guarantee that the replacement card would be a new retail boxed card. Kind of hesitant to pull the trigger now. Has anyone else who's going through the program received a refurbished card? I remember reading a couple posts that said they got new sealed retail boxes. TIA
Mine was sealed.
|
555WarDaddy555
New Member
- Total Posts : 34
- Reward points : 0
- Joined: 2004/07/17 17:24:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 18:31:47
(permalink)
willm1224
555WarDaddy555
lobstar
555WarDaddy555
Mine was sealed.
Retail box or white box?
|
willm1224
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2020/09/19 18:56:10
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 18:32:47
(permalink)
555WarDaddy555
willm1224
555WarDaddy555
lobstar
555WarDaddy555
Mine was sealed.
Retail box or white box?
Factory sealed retail box.
|
1984BC05A6D6416
Superclocked Member
- Total Posts : 177
- Reward points : 0
- Joined: 2017/03/06 09:41:28
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 19:06:59
(permalink)
[Deleted]
post edited by MaxTheOwl - 2022/12/16 08:37:17
|
funkdoobi
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2021/02/18 17:06:41
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/03 19:56:29
(permalink)
Just updated my card to a custom block from the hybrid, i seem stuck on hybrid xoc though. Anyone got any clue why it won't let me flash? Keeps saying this update won't work for it
EK Velocity on 5900x / Crosshair VIII Hero Wifi / Optimus on FTW3 Ultra 3090 / Lian Li 011 XL / EK FLT360
|
warbucks81
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 2013/06/05 18:38:24
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/04 07:09:58
(permalink)
orez-bus
warbucks81
Quick update, got my new card through the swap program (USA) on Friday. I hit 500W no problem now and PCIE stays below 66W Clocks are way more stable with this card.
Great news. This is with the stock FTW3 XOC bios?
Correct. With the XOC bios that ships with the card. I may throw the KPE bios on it and test some benchmarks to compare.
|
joshjd93
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2011/09/15 16:18:08
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/04 08:36:19
(permalink)
willm1224
555WarDaddy555
willm1224
555WarDaddy555
lobstar
555WarDaddy555
Mine was sealed.
Retail box or white box?
Factory sealed retail box.
Can you send as GPUZ screen showing which BIOS you are using thats considered "Original XOC 500w" BIOS? There are so many floating around now I cant keep track.
|
lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/04 11:07:13
(permalink)
Mine was full retail brand new in box. Since it's a revised board I imagine not a lot have made it into the refurb channels.
|