lobstar
Superclocked Member
- Total Posts : 208
- Reward points : 0
- Joined: 2007/03/05 13:08:02
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 08:25:48
(permalink)
Wrapped-in-bacon
Crap, now I feel like I may have screwed myself. I emailed support last night because my 2012 s/n 3090 had a cap pop and fried. They told me I would be getting a refurb unit. I wish I would have known about this before I asked for the cross-ship.
What? You'd rather have a broken card that you've used vs a refurbed card? They always say it's a refurb btw. Lots of us got brand new cards. But beyond that, pretty much every company will fulfill warranty replacements from refurbished stock when available.
|
Wrapped-in-bacon
New Member
- Total Posts : 23
- Reward points : 0
- Joined: 2018/11/17 08:26:40
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 08:43:18
(permalink)
No I was saying I would rather get the one with the newer PCB than a refurb.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 09:36:30
(permalink)
Dear All, So today I have got my RMA 3090 OC program card. Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it Factory BIOS: 94.02.42.80.14 (non OC) 94.02.42.80.15 (OC) I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB) Standard: https://cdn.evga.com/bios/30Series/3982V940242C005.zip OC: https://cdn.evga.com/bios/30Series/3982K940242C002.zip 94.02.42.C0.05 (non OC) 94.02.42.C0.02 (OC) PCIE slot marking 1.0 PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process. My RMA experience: - Getting approval was somewhat lengthy due German public holiday. - 3 days to ship to EVGA. - 3 days from EVGA Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours. Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time… Kind regards Tomas
|
P4R4DiSi4C
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2021/01/08 05:09:20
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 10:04:38
(permalink)
Hi everybody,
I'm hitting perfcap PWR at 380-400W with hybrid cooler and XOC bios, only bios giving more power is the XC3 one with Resizable bar enabled.
I'm entitled to the replacement program ?
Cheers
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6801
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 77
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 11:01:19
(permalink)
P4R4DiSi4C
Hi everybody,
I'm hitting perfcap PWR at 380-400W with hybrid cooler and XOC bios, only bios giving more power is the XC3 one with Resizable bar enabled.
I'm entitled to the replacement program ?
Cheers
Post 2 on the first page of this thread has info for you.
|
Thirty-Thirty
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2021/04/06 13:27:11
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 11:05:22
(permalink)
orez-bus
Thirty-Thirty
Hello all,
I would like to share my experience with the exchange program.
I purchased my 3090 FTW3 card at the end of 2020, but could put it into operation together with the rest of the components only a months ago.
The serial number startet with 2014 und it had red lips.
I tested two OC 500W Bios (94.02.26.48.F8 and 94.02.42.80.27)
No benchmark could exceed a power draw over 450W. Maximum value and not average. Most of he time I got around 400-420W. GPU-Z showed max. 105-107% TDP – although raised to 119% in Precision X1.
Also PCIe power draw sometimes exceeded 80W.
So I reached out to sending some screenshots and they approved the exchange.
I'm from Germany, so the next steps of the exchange went through EVGA Munich in Germany.
This is what I got in return
- 3090 FTW3 in original box (sealed)
- serial number starts with 2112 (label on box says made in Taiwan - I thought 12 means China)
- red lips
- BIOS 94.02.42.80.14 (non OC) and 94.02.42.80.15 (OC)
- PCIe retention tab show version 1.0
I'm irritated by the old BIOS versions (most of you seem to have gotten the version 94.02.42.C0.02) and by the red lips cooler.
Setting Precision X1 to 119%, +150 cpu clock, +800 ram clock and voltage slider to the right position.
Kombustor benchmark including FurMark and Port Royale showed 450-460W max. - but now continuously. 500W were not reachable.
PCIe power stays between 65-70W - so this issue is fixed.
I tried to update with BIOS with 94.02.42.80.27 from the start post like I did it with my old card.
This was not possible because of a mismatch of the PCI subsystem (so this card IS different from my orginal one?).
WARNING: Firmware image PCI Subsystem ID (3842.3987)
does not match adapter PCI Subsystem ID (3842.3982)
Using nvflash with --protectoff and -6 I could flash BIOS version 94.02.42.80.27.
Thanks to orez-bus for the notice, that only with this bios he could reach the 500W.
Port Royal benchmark result: 14.611 (119%, +150, +800, max. voltage, stock cooler)
(AMD 5950X no overclock, Asus Crosshair VIII Dark Hero).
So everything is fine? I think so...
But I'm not so sure that I got exchange within the special OC campaign (BIOS versions, red lips - but new 1.0 at the retention tab).
Best,
Thirty-Thirty
Have you gained performance with the apparent boost in power? There's got to be a reason they segmented the PCI ID on these cards. Please note this is 'seems to work for me' status. No warranties expressed or implied.
Time Spy with old card: 18.814 (435W max. - GPU-Z) Time Spy with exchanged card: 19.285 (500W reached - GPU-Z) 5950X non OC, 3090 stock cooler (air), same Precision X1 settings
|
mang1315
New Member
- Total Posts : 43
- Reward points : 0
- Joined: 2021/05/24 18:38:52
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 18:55:28
(permalink)
Really improved after learning!!
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 19:24:38
(permalink)
For those of you doing the 3090oc rma for the hybrid just letting you guys know that my replacement shipped out today and should be here tomorrow. I'll update you guys on whether it is a new one, a refurb, and if it is indeed a revised version or not. Hopefully there is no going back and forth to get the correct revision as some have had to do.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
tshin3232
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/05/26 08:11:20
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 20:06:41
(permalink)
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Thank you very much for this! I was able to enable RE-BAR on this very same card with those links. Where did you find them?
|
Tiiii86
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2021/05/24 16:51:54
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/24 22:39:32
(permalink)
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Hi Tomas! Im new to this forum! What does the new serial number start with? I bought 3090 fwt3 ultra it came with black lip and my serial number starts with 2112 and it cane with the 500w bios but im not sure which version. What version should i install? Whats the newest one
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 01:25:08
(permalink)
Tiiii86
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Hi Tomas! Im new to this forum!
What does the new serial number start with? I bought 3090 fwt3 ultra it came with black lip and my serial number starts with 2112 and it cane with the 500w bios but im not sure which version.
What version should i install? Whats the newest one
SN should start with 21 but be advised that that is true even for refurb cards... as for BIOS version just use GPU-Z program it will also show you if you have power balancing issues as even my original card 2112 has that issue as well. Cards which should be OK and with revised VRM should have 1.0 on PCIE slot, cards with 0.1 are original design (problematic one)
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 01:27:09
(permalink)
tshin3232
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Thank you very much for this! I was able to enable RE-BAR on this very same card with those links. Where did you find them?
Here on forum like I stated... hard to keep track it is in the topic about enabling Re-Bar in RTX 30 section, posted by Jacob
|
Tiiii86
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2021/05/24 16:51:54
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 07:14:51
(permalink)
spider1701
Tiiii86
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Hi Tomas! Im new to this forum!
What does the new serial number start with? I bought 3090 fwt3 ultra it came with black lip and my serial number starts with 2112 and it cane with the 500w bios but im not sure which version.
What version should i install? Whats the newest one
SN should start with 21 but be advised that that is true even for refurb cards...
as for BIOS version just use GPU-Z program it will also show you if you have power balancing issues as even my original card 2112 has that issue as well.
Cards which should be OK and with revised VRM should have 1.0 on PCIE slot, cards with 0.1 are original design (problematic one)
Hi again! I just looked at my card I have 0.1 I will upload a picture it draws 80+w on pcie
Attached Image(s)
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 07:17:35
(permalink)
Even with the new revised card I only get 468 watts max. I tried going to the old bios but it will not flash onto my card. Is this common on the new cards. It’s still a hell of an overclocker.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 09:22:19
(permalink)
Tiiii86
spider1701
Tiiii86
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Hi Tomas! Im new to this forum!
What does the new serial number start with? I bought 3090 fwt3 ultra it came with black lip and my serial number starts with 2112 and it cane with the 500w bios but im not sure which version.
What version should i install? Whats the newest one
SN should start with 21 but be advised that that is true even for refurb cards...
as for BIOS version just use GPU-Z program it will also show you if you have power balancing issues as even my original card 2112 has that issue as well.
Cards which should be OK and with revised VRM should have 1.0 on PCIE slot, cards with 0.1 are original design (problematic one)
Hi again!
I just looked at my card I have 0.1 I will upload a picture it draws 80+w on pcie
Well your stats prety much are valid for RMA mainly due to PCIE slot W usage. If you want to start special RMA write email to 3090OC@evga.com that way you will get revised card. kind regards Tomas
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 09:44:03
(permalink)
DarthSawyers
Even with the new revised card I only get 468 watts max. I tried going to the old bios but it will not flash onto my card. Is this common on the new cards. It’s still a hell of an overclocker.
The new cards are not necessarily meant to reach the 500w. Some do and some don't. The issue they are solving with this revision is the pcie power draw.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 10:15:51
(permalink)
My 3090OC RMA came in for my 3090 FTW3 Hybrid. It's brand new sealed in box and it is indeed a rev. 1.0 model. About to start swapping it out. Will report back once I get to test it.
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
Tiiii86
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2021/05/24 16:51:54
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 10:31:27
(permalink)
I am talking to the 3090oc@evga.com support right now. The asked me to register my product, I hope they will help me get the new revision. Is it worth to do the procedure if I'm hitting 500+ watts? I'm mostly concerned about the pcie 80+ watts, is it something dangerous? I mean to my card or other components?
post edited by Tiiii86 - 2021/05/25 11:38:16
|
CyberGeek99
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2021/05/18 08:26:48
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS
2021/05/25 11:19:50
(permalink)
Where can I find information on the switch the EVGA GeForce RTX 3090 FTW3 ULTRA has?
There is a normal - OC switch
What is difference?
How does each mode work?
In the normal mode can you use MSI Afterburner to OC?
in OC mode can you use MSI Afterburner to OC?
Do you need to use water block in OC mode? liquid cooling?
|
Tiiii86
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2021/05/24 16:51:54
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 14:21:02
(permalink)
spider1701
Tiiii86
spider1701
Tiiii86
spider1701
Dear All,
So today I have got my RMA 3090 OC program card.
Card came in brand NEW sealed box…. Black lips wild XOC 500W bios on it
Factory BIOS:
94.02.42.80.14 (non OC)
94.02.42.80.15 (OC)
I have applied relevant BIOS from RE-Bar forum (links below as the card is 3982 PCB)
Standard:
OC:
94.02.42.C0.05 (non OC)
94.02.42.C0.02 (OC)
PCIE slot marking 1.0
PCIE power draw on maximum setting 61-66W I am overall happy that I went through RMA process.
My RMA experience:
- Getting approval was somewhat lengthy due German public holiday.
- 3 days to ship to EVGA.
- 3 days from EVGA
Please note: that my initial email from CZ domain was completely ignored (probably filtered out by EVGA email filter) once I send email from my GMAIL I have got response within 2 hours.
Based on above I am happy with EVGA RMA support (only pity that first PCB generation seems like BETA test but they are doing RMA if you ask for it) … Right now, I do hope that this card will stick with me for a long time…
Kind regards
Tomas
Hi Tomas! Im new to this forum!
What does the new serial number start with? I bought 3090 fwt3 ultra it came with black lip and my serial number starts with 2112 and it cane with the 500w bios but im not sure which version.
What version should i install? Whats the newest one
SN should start with 21 but be advised that that is true even for refurb cards...
as for BIOS version just use GPU-Z program it will also show you if you have power balancing issues as even my original card 2112 has that issue as well.
Cards which should be OK and with revised VRM should have 1.0 on PCIE slot, cards with 0.1 are original design (problematic one)
Hi again!
I just looked at my card I have 0.1 I will upload a picture it draws 80+w on pcie
Well your stats prety much are valid for RMA mainly due to PCIE slot W usage.
If you want to start special RMA write email to that way you will get revised card.
kind regards
Tomas
They answered me with this. What should I do?
Attached Image(s)
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6801
- Reward points : 0
- Joined: 2008/02/06 06:58:57
- Location: Through the Scary Door
- Status: offline
- Ribbons : 77
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 14:29:38
(permalink)
Tiiii86
They answered me with this. What should I do?
Regular RMA then, and let them know that you'll be RMAing until that third party software reads 67W or under, like all properly functioning PCIE compliant video cards do.
|
eg1122
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2020/04/23 00:05:27
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/25 15:00:48
(permalink)
A little update on my replacement hybrid. Pcie never exceeds 66w and it's pulling around 485w with an OC that hits 2085mhz. Could probably push it further but I'm happy with where it is at. My previous card would not pull over 420w and would max out around 2025mhz (stable). I undervolted my replacment to 2085mhz @987mV and it is pulling around 468w and it keeps the temps in the mid 50s (room temp is currently 26C...I live in a really hot area) during Port Royal Stress Test-20 loops. This is with 4 ml120s 2400rpm fans set up in push/pull as top exhaust. Overall very happy with the replacement.
post edited by eg1122 - 2021/05/25 15:02:30
CPU: Intel i9-11900K Cooling: Corsair iCue H150i RGB Pro XT Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB Mother Board: MSI MEG Z590 Ace GPU: EVGA RTX 3090 FTW3 Ultra Hybrid RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB Sound: Creative Sound Blaster X3 Case: Corsair Crystal Series 680x PSU: EVGA SuperNOVA 1000W G2 Monitor: Asus Strix XG32VQ (144hz) Keyboard: Corsair K100 - Cherry MX Mouse: Logitech MX Master OS: Windows 10 pro 64bit
|
Alpha_Omega69
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2015/05/15 02:47:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 03:16:41
(permalink)
I can't seem to update my vbios on my 3090 FTW3 Ultra model. It keeps on telling me there is no compatible display adapter found I don't have anything running in the background when I try its a frensh windows installation. Any tips? Tried both in OC mode and normal mode all giving the same error.
|
DarthSawyers
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/07/27 07:40:57
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 05:03:59
(permalink)
I have the same issue. Doesn’t matter what bios I use it will not flash.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 05:59:01
(permalink)
arestavo
Tiiii86
They answered me with this. What should I do?
Regular RMA then, and let them know that you'll be RMAing until that third party software reads 67W or under, like all properly functioning PCIE compliant video cards do.
Don't give up... they have provided you with out of spec card which violates PCIE standard. Also argument that you should be using voltmeter is void unless the admit that internal sensors on the card does not provide accurate information. Note that PCIE standard is 75W (tops) which consist from (12V and 3.3V) GPU-Z measures only 12V thus the exact W slot usage may be over 90W. Also please note that regular RMA will grant you most probably refurb card of the same PCB version. If I would you I would insist on 3090OC or specifically requested that replacement card has PCB 1.0 (revised controller) kind regards Tomas
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 06:03:54
(permalink)
Alpha_Omega69
I can't seem to update my vbios on my 3090 FTW3 Ultra model. It keeps on telling me there is no compatible display adapter found I don't have anything running in the background when I try its a frensh windows installation. Any tips? Tried both in OC mode and normal mode all giving the same error.
I am just guessing that you are using VBIOS from this part of the forum thus it should be applied only to OLD cards. NEW cards has already XOC bios on them but mostly not RE-BAR one.
post edited by spider1701 - 2021/05/26 06:05:06
|
Tiiii86
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2021/05/24 16:51:54
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 06:04:41
(permalink)
 spider1701
arestavo
Tiiii86
They answered me with this. What should I do?
Regular RMA then, and let them know that you'll be RMAing until that third party software reads 67W or under, like all properly functioning PCIE compliant video cards do.
Don't give up... they have provided you with out of spec card which violates PCIE standard. Also argument that you should be using voltmeter is void unless the admit that internal sensors on the card does not provide accurate information.
Note that PCIE standard is 75W (tops) which consist from (12V and 3.3V) GPU-Z measures only 12V thus the exact W slot usage may be over 90W.
Also please note that regular RMA will grant you most probably refurb card of the same PCB version.
If I would you I would insist on 3090OC or specifically requested that replacement card has PCB 1.0 (revised controller)
kind regards
Tomas
Thank you very much for all help Tomas! I insisted to rma this card. They have not replied yet, but I will not give up. They should provide the high end card I I have paid for. Best regards Taulant
post edited by Tiiii86 - 2021/05/26 06:07:11
Attached Image(s)
|
Alpha_Omega69
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2015/05/15 02:47:47
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 06:09:09
(permalink)
spider1701
Alpha_Omega69
I can't seem to update my vbios on my 3090 FTW3 Ultra model. It keeps on telling me there is no compatible display adapter found I don't have anything running in the background when I try its a frensh windows installation. Any tips? Tried both in OC mode and normal mode all giving the same error.
I am just guessing that you are using VBIOS from this part of the forum thus it should be applied only to OLD cards.
NEW cards has already XOC bios on them but mostly not RE-BAR one.
How would I know if my card has the xoc bios? I don't see anywhere near 500watts being pulled in OC mode and in evga precision x it's telling me that there is a firmware/bios update but whenever I click update the program just crashes.
|
spider1701
Superclocked Member
- Total Posts : 135
- Reward points : 0
- Joined: 2010/05/22 17:18:02
- Status: offline
- Ribbons : 1
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 06:12:31
(permalink)
Tiiii86
spider1701
arestavo
Tiiii86
They answered me with this. What should I do?
Regular RMA then, and let them know that you'll be RMAing until that third party software reads 67W or under, like all properly functioning PCIE compliant video cards do.
Don't give up... they have provided you with out of spec card which violates PCIE standard. Also argument that you should be using voltmeter is void unless the admit that internal sensors on the card does not provide accurate information.
Note that PCIE standard is 75W (tops) which consist from (12V and 3.3V) GPU-Z measures only 12V thus the exact W slot usage may be over 90W.
Also please note that regular RMA will grant you most probably refurb card of the same PCB version.
If I would you I would insist on 3090OC or specifically requested that replacement card has PCB 1.0 (revised controller)
kind regards
Tomas
Thank you very much for all help Tomas!
I insisted to rma this card. They have not replied yet, but I will not give up. They should provide the high end card I I have paid for.
Best regards
Taulant
good... do for them same test and Board power usage set to AVG that will show you if your card is actually capable to reach and hold 500W... Max value is not relevant if card is not able to maintain level of performance.
|
nxqdevga
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2017/07/15 13:15:21
- Status: offline
- Ribbons : 0
Re: EVGA GeForce RTX 3090 FTW3 XOC BIOS BETA
2021/05/26 07:21:23
(permalink)
Hi EVGA, I'm a dual 3090 FTW Ultra EVGA buyer, I have had this problem with these cards for a long time, however it still keeps happening. 1. I have 2 cards, both are 0.1REV, one of them pulling more than 80W on the PCIe slot, the other around 70+W. However, it's not a problem if it keeps working, in my case, they crash so often, because I use dual of the card for my rendering work, if one card crashes, the other disappears from the machine as well. 2. How do I fix it? Restart doesn't work, I have to pull the power cable out of 2 cards, keep the cards in the PCIe slot without the cables, run my PC with onboard graphics, wait for a day, plug the powers in again and they both work again, however it keeps crashing which is extremely annoying. They crash more than 10 times in less than 3 months. I have another working machine with 2 3090 MSI, both of the cards never pull more than 25W from PCIe and they never have this problem. So I write this to please help me with this, it takes too much time. I bought 2 cards from a contributor to Vietnam, how do I describe the problem to them? Then I can change to a new version which doesn't have this annoying problem anymore.
post edited by nxqdevga - 2021/05/26 07:27:48
|