AdamInk
Superclocked Member
- Total Posts : 240
- Reward points : 0
- Joined: 2016/10/02 04:23:53
- Location: Hungary
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 01:46:15
(permalink)
Its not good that i start with primray switch and refresh the secondray driver with the primrary ?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 01:49:07
(permalink)
AdamInk Its not good that i start with primray switch and refresh the secondray driver with the primrary ?
No, as then you would be loading the primary vbios onto the secondary switch.
|
Rongolb
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2016/11/03 01:47:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:07:05
(permalink)
i have the FTW GTX 1070 and im not sure how to download the update. ( First, the primary.restart. then download the secondary ?? ) Help pls !!
|
AdamInk
Superclocked Member
- Total Posts : 240
- Reward points : 0
- Joined: 2016/10/02 04:23:53
- Location: Hungary
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:08:32
(permalink)
Sajin
AdamInk
Alameer1s If your fans didnt stop even if the temperature is under 60C I asked the support about that this is the answer : Hello,
Thank you for contacting us. The only thing changed was the micron vRAM. No other changes were made. You must have the card set to the secondary BIOS, which doesn't allow for the 0db fan profile.
Try switching it over and see if the fans will stop spinning if the GPU is under 60C.
(I made a mistake by installing the secondary bios on primary, I fixed that an everything is ok now)
How can the primray bios version put back when you installed the secondary bios on the primrary switch in mistake?
Simple... #1 Load into windows on the actual secondary switch. #2 Move switch to primary. #3 Reflash primary with primary vbios.
So i have to switch to primray in windows while the computer is on and then update ?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:10:10
(permalink)
AdamInk
Sajin
AdamInk
Alameer1s If your fans didnt stop even if the temperature is under 60C I asked the support about that this is the answer : Hello,
Thank you for contacting us. The only thing changed was the micron vRAM. No other changes were made. You must have the card set to the secondary BIOS, which doesn't allow for the 0db fan profile.
Try switching it over and see if the fans will stop spinning if the GPU is under 60C.
(I made a mistake by installing the secondary bios on primary, I fixed that an everything is ok now)
How can the primray bios version put back when you installed the secondary bios on the primrary switch in mistake?
Simple... #1 Load into windows on the actual secondary switch. #2 Move switch to primary. #3 Reflash primary with primary vbios.
So i have to switch to primray in windows while the computer is on and then update ?
Yes.
|
Rongolb
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2016/11/03 01:47:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:11:42
(permalink)
Sajin
AdamInk
Sajin
AdamInk
Alameer1s If your fans didnt stop even if the temperature is under 60C I asked the support about that this is the answer : Hello,
Thank you for contacting us. The only thing changed was the micron vRAM. No other changes were made. You must have the card set to the secondary BIOS, which doesn't allow for the 0db fan profile.
Try switching it over and see if the fans will stop spinning if the GPU is under 60C.
(I made a mistake by installing the secondary bios on primary, I fixed that an everything is ok now)
How can the primray bios version put back when you installed the secondary bios on the primrary switch in mistake?
Simple... #1 Load into windows on the actual secondary switch. #2 Move switch to primary. #3 Reflash primary with primary vbios.
So i have to switch to primray in windows while the computer is on and then update ?
Yes.
have the FTW GTX 1070 and im not sure how to download the update. ( First, the primary.restart. then download the secondary ?? ) Help pls !!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:17:34
(permalink)
Rongolb have the FTW GTX 1070 and im not sure how to download the update. ( First, the primary.restart. then download the secondary ?? ) Help pls !!
You can download both updates at once. You'll need to update each vbios separately. Update primary first, shutdown pc, move vbios switch to secondary, boot pc, update secondary, shutdown pc, move switch back to primary. done.
|
AdamInk
Superclocked Member
- Total Posts : 240
- Reward points : 0
- Joined: 2016/10/02 04:23:53
- Location: Hungary
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:24:27
(permalink)
Thank you for your help Sajin! One more question :) After that when i want to update the secondary bios all i have to do to boot on secondary and update bios 2 ?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:25:56
(permalink)
AdamInk Thank you for your help Sajin! One more question :) After that when i want to update the secondary bios all i have to do to boot on secondary and update bios 2 ?
Correct.
|
Rongolb
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2016/11/03 01:47:29
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:33:29
(permalink)
Sajin
AdamInk Thank you for your help Sajin! One more question :) After that when i want to update the secondary bios all i have to do to boot on secondary and update bios 2 ?
Correct.
how to change from primary to secondary mode ( where is the switch ). and 1 more question, this update changes the stock fan rpm graph ?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 02:44:23
(permalink)
Rongolb how to change from primary to secondary mode ( where is the switch ). and 1 more question, this update changes the stock fan rpm graph ?
Fan speed should remain the same.
|
AdamInk
Superclocked Member
- Total Posts : 240
- Reward points : 0
- Joined: 2016/10/02 04:23:53
- Location: Hungary
- Status: offline
- Ribbons : 1
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 03:08:30
(permalink)
Then i just simply can't understand why i have to boot on secondary then switch to primrary and run update 1? Because i put update 2 on primrary slot ? What if i boot up in primrary and simply run update 1? It wont refelash the update 2 to update 1 on the primrary slot ? I mean if i want to update secondary, then i have to boot on secondary and appy update 2. I hope i was clear :)
|
evga1070new
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/11/03 03:01:41
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 04:11:47
(permalink)
Hello ! Does have a new bios here which to fix problems with temperatures VRM on the 1070 FTW ?
|
tiran233
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2016/11/03 03:30:48
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 05:12:29
(permalink)
evga1070new Hello ! Does have a new bios here which to fix problems with temperatures VRM on the 1070 FTW ?
нет=) нужно ждать.
|
FarmerKlink
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 2013/12/26 19:17:18
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 09:03:12
(permalink)
I think i'm not understanding something here...I got the bios update, it installed fine! However, my card is an Evga 1070 FTW, with the Samsung memory, does this mean that I got the wrong bios update? Or am I good to go...Also is there anything wrong with the bios revision shown in GPU-Z? (I'm using the secondary bios right now.) Edit: I just switched back to the primary bios, and everything looks normal from there, except for the Samsung memory, still wondering about that... Edit2: I just updated the secondary bios as well, it now reads the same as the primary, except with a .01 instead of .00
post edited by FarmerKlink - 2016/11/03 09:21:07
Attached Image(s)
Case: MAINGEAR VYBE (White) PSU: Corsair RM850X (2018 edition)MB: Asus ROG MAXIMUS XII Formula CPU: Intel® i9 10900K @4.9 GhzAIO: Corsair H100i GTXGPU: EVGA RTX 2080 TI FTW3 HybridRAM: G.SKILL TridentZ RGB 32gb DDR4 @3600MhzM.2 SSD:Samsung 970 EVO Plus 500gbM.2 SSD 2: Intel 660p 2tbHHD: Western Digital Black 1tb 7200RPMOS: Microsoft® Wind
|
vince572
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/11/03 06:03:34
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 10:00:35
(permalink)
Bonjour. Je viens d'installer les bios correspondant à ma carte graphique gtx 1070 FTW hybrid.Depuis windows ne reconnais plus ma carte graphique et il est impossible d'installer les drivers Nvidia.Help ! google traduction : Hello. I just installed the bios matching my graphics card gtx 1070 FTW hybrid.Depuis windows do not recognize my video card and you can not install the drivers Nvidia.Help! problem solved.My version of Windows 10 was too old!
post edited by vince572 - 2016/11/03 10:56:30
Attached Image(s)
|
Refugee47
New Member
- Total Posts : 83
- Reward points : 0
- Joined: 2015/08/01 14:37:38
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 11:10:02
(permalink)
I just bought 2 ftw 1070's from evga.com a week ago . If I rma my unused cards for this issue will I get 2 brand new cards in consumer packaging or cards in the evga brown box that could be refurbished ?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 11:46:56
(permalink)
AdamInk Then i just simply can't understand why i have to boot on secondary then switch to primrary and run update 1? Because i put update 2 on primrary slot ? What if i boot up in primrary and simply run update 1? It wont refelash the update 2 to update 1 on the primrary slot ? I mean if i want to update secondary, then i have to boot on secondary and appy update 2. I hope i was clear :)
You can do it either way.
|
ComXERO
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/28 15:07:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 11:58:15
(permalink)
I'm having an issue with the updater. I'm following the instructions, yet when I run the update, the screen blacks out, then comes back with no changes. I'm not given the option to press Y to start anything.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:03:52
(permalink)
evga1070new Hello ! Does have a new bios here which to fix problems with temperatures VRM on the 1070 FTW ?
No. FarmerKlink I think i'm not understanding something here...I got the bios update, it installed fine! However, my card is an Evga 1070 FTW, with the Samsung memory, does this mean that I got the wrong bios update? Or am I good to go...Also is there anything wrong with the bios revision shown in GPU-Z? (I'm using the secondary bios right now.) Edit: I just switched back to the primary bios, and everything looks normal from there, except for the Samsung memory, still wondering about that... Edit2: I just updated the secondary bios as well, it now reads the same as the primary, except with a .01 instead of .00
You're good. Refugee47 I just bought 2 ftw 1070's from evga.com a week ago . If I rma my unused cards for this issue will I get 2 brand new cards in consumer packaging or cards in the evga brown box that could be refurbished ?
If an RMA is necessary within 30 days of the original purchase date, a new in box OEM replacement will be sent in return if the product was purchased new-in-box, subject to availability. ComXERO I'm having an issue with the updater. I'm following the instructions, yet when I run the update, the screen blacks out, then comes back with no changes. I'm not given the option to press Y to start anything.
Did you run the update as administrator?
|
ComXERO
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/28 15:07:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:07:10
(permalink)
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:21:10
(permalink)
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
|
ComXERO
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/28 15:07:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:29:57
(permalink)
Sajin
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
Disabled card. Ran Update. Rebooted. GPU-Z still shows I'm on 86.04.26.00.70.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:41:35
(permalink)
ComXERO
Sajin
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
Disabled card. Ran Update. Rebooted. GPU-Z still shows I'm on 86.04.26.00.70.
What card do you have?
|
ComXERO
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/28 15:07:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:42:41
(permalink)
Sajin
ComXERO
Sajin
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
Disabled card. Ran Update. Rebooted. GPU-Z still shows I'm on 86.04.26.00.70.
What card do you have?
GTX 1070 FTW DT
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:50:20
(permalink)
ComXERO
Sajin
ComXERO
Sajin
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
Disabled card. Ran Update. Rebooted. GPU-Z still shows I'm on 86.04.26.00.70.
What card do you have?
GTX 1070 FTW DT
If you're on an AMD platform you'll need to contact evga @ 1-888-880-3842 to get a different update.
|
ComXERO
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2016/10/28 15:07:12
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 12:53:19
(permalink)
Sajin
ComXERO
Sajin
ComXERO
Sajin
ComXERO Yes sir.
Try disabling the card in device manager before running the update.exe
Disabled card. Ran Update. Rebooted. GPU-Z still shows I'm on 86.04.26.00.70.
What card do you have?
GTX 1070 FTW DT
If you're on an AMD platform you'll need to contact evga @ 1-888-880-3842 to get a different update.
That I am. Running an FX-9590. Thanks for the assistance Sajin.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 13:03:00
(permalink)
ComXERO That I am. Running an FX-9590. Thanks for the assistance Sajin.
No problem.
|
ExXoNuk
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2016/10/21 04:02:11
- Status: offline
- Ribbons : 0
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 13:04:01
(permalink)
Hey,
just a quick question. A friend has the same problem as I had: when he opens the file his screen turns black ( PC/Windows is still running tho ). When he switches to his onboard graphics and starts the bios file he can see everything and he is prompted to press " y ".
Should there be a problem if he does it that way? Switch to onboard graphics and update the bios, will that work?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49089
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA GeForce GTX 1070 BIOS Update v86.04.50.00.70
2016/11/03 13:16:14
(permalink)
ExXoNuk Hey,
just a quick question. A friend has the same problem as I had: when he opens the file his screen turns black ( PC/Windows is still running tho ). When he switches to his onboard graphics and starts the bios file he can see everything and he is prompted to press " y ".
Should there be a problem if he does it that way? Switch to onboard graphics and update the bios, will that work?
Yes, that should work without any problems.
|