EVGA

LockedEVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011

Page: << < ..678910.. > >> Showing page 9 of 11
Author
Louiiis
SSC Member
  • Total Posts : 822
  • Reward points : 0
  • Joined: 2011/01/18 08:04:20
  • Location: United Kingdom
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/02/17 17:11:22 (permalink)
Is there any way to revert back to the original factory/default BIOS? I say this as my temps on the primary GPU either with 1.0 or 1.1 are significantly higher than those on the secondary card. For instance, on Youtube two minutes ago, my temperature on the primary 580 were 62 celsius and on the secondary they were 33 - no such thing occured on the default BIOS.

Intel i7-2600k @ 4.6GHz 1.32v || Corsair H70 W/ Gentle Typhoon AP-15 || Corsair Vengeance 8Gb 1600MHz 9-9-9-24 1.5v || EVGA GTX 580 SC SLI || Crucial C-300 64Gb SSD + Western Digital Caviar Black 6Gbp/s 1Tb HDD || ASUS Xonar Essence STX W/ Beyerdynamic DT 770 Pro 80Ω || Corsair AX 1200W || Asus Maximus IV Extreme || CoolerMaster HAF-X W/ 4xCM200mm fans 
 
           
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6502
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/02/18 13:09:43 (permalink)
corb01772

Anyone who is having issues with Fan Unlocker 1.1, Jacob posted links to Fan Unlocker 1.0 here: http://forums.evga.com/fb.ashx?m=854218

It fixed my and several others dual monitor and nvidia surround problems.


That fixed my probs so far it seems.. 4 out of 4 reboots i got to the desktop and no black screens!
 
Though i now have a new prob going to the new .83 bios from .82.  Now my card wont downclock just sitting idle. Stuck at 943Mhz, so thats really keeping the temps up.
 
 

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6502
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/02/21 13:20:38 (permalink)
Louiiis

Is there any way to revert back to the original factory/default BIOS? I say this as my temps on the primary GPU either with 1.0 or 1.1 are significantly higher than those on the secondary card. For instance, on Youtube two minutes ago, my temperature on the primary 580 were 62 celsius and on the secondary they were 33 - no such thing occured on the default BIOS.


Thats probably because the .83 bios seems to not wana downlock the cards off of the 3D settings when idle.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
Punisher12
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2011/02/12 18:23:19
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/02/22 13:55:11 (permalink)
Is there any way to go back to the original bios?
Sorry I'm kind of a noob when it comes to flashing things.

Just incase the unlocker doesn't work properly, I want to be able to revert to the original bios.
cosmotrkr
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2009/09/16 16:19:13
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/02/26 16:37:30 (permalink)
Is there any news as to a fix for the 580 not downclocking when 2 monitors are being used.
 
I've tried the bios update, changing refresh rate.  
 
I got it to downclock using Afterburner but wondering why it wont  or when it will do it natively?
 
 
post edited by cosmotrkr - 2011/02/26 16:42:51

i7 920  4.2Ghz
GTX 580 SLI 920/1840/2150
12Gigs OCZ Gold
Corsair ATX 1200
H2O all around
EarlZ
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2011/02/28 01:36:05
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/02 03:14:28 (permalink)
Does the fan speed unlocker in anyway change how the fanspeed scales, like for example before updating at 60c the fan would be at 55% and with the new update its higher/lower or the same ?
EarlZ
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2011/02/28 01:36:05
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/02 03:18:19 (permalink)
AHowes

Louiiis

Is there any way to revert back to the original factory/default BIOS? I say this as my temps on the primary GPU either with 1.0 or 1.1 are significantly higher than those on the secondary card. For instance, on Youtube two minutes ago, my temperature on the primary 580 were 62 celsius and on the secondary they were 33 - no such thing occured on the default BIOS.


Thats probably because the .83 bios seems to not wana downlock the cards off of the 3D settings when idle.

 
This is reported by MSI Afterburner
 
Display device       : GeForce GTX 580 on GF110 GPU
Display driver       : ForceWare 267.24
BIOS                 : 70.10.17.00.82
 
So this means my bios is .82, I havent flash any of the fan speed unlockers yet but does this problem occur with stock bios?
EVGA_JacobF
EVGA Alumni
  • Total Posts : 11559
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/02 09:50:49 (permalink)
EarlZ

Does the fan speed unlocker in anyway change how the fanspeed scales, like for example before updating at 60c the fan would be at 55% and with the new update its higher/lower or the same ?

It is around the same.


EarlZ
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2011/02/28 01:36:05
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/03 07:34:26 (permalink)
EVGA_JacobF

EarlZ

Does the fan speed unlocker in anyway change how the fanspeed scales, like for example before updating at 60c the fan would be at 55% and with the new update its higher/lower or the same ?

It is around the same.

Alright, so what is the new bios version after updating as what I've seen from the rest they say this new bios gives 1.1150v as max volts, I already have 1.1150v accessible by default but only limited to 80% fan speed.. not that I would even use 80% or make it go near 75%
lb
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2010/10/29 06:16:53
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/04 12:24:53 (permalink)
I have a non-SC EVGA GTX 580 card.  Can I flash it with the SC BIOS?  Are the SC and non-SC cards identical hardware-wise, or does the SC version have better chips?
EarlZ
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2011/02/28 01:36:05
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/04 15:06:29 (permalink)
Im sure the SC has the same chip, its only 25Mhz more anyway..
 
Also with the fanspeed unlocker the stock VID is a bit higher.. my became 1.088v from 1.082v is this expected?
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 13879
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 135
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/04 15:25:24 (permalink)
lb

I have a non-SC EVGA GTX 580 card.  Can I flash it with the SC BIOS?  Are the SC and non-SC cards identical hardware-wise, or does the SC version have better chips?

 
They are identical hardware wise. The SC cards are binned to operate at the higher clocks.
Yes it's possible to force flash the card with a BIOS that doesn't belong to it.

EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
 
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 13879
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 135
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/04 15:27:07 (permalink)
EarlZ

Im sure the SC has the same chip, its only 25Mhz more anyway..

Also with the fanspeed unlocker the stock VID is a bit higher.. my became 1.088v from 1.082v is this expected?

Hmm the VID is changed in steps. 1.088 is a valid VID 1.082 is not. That could be an issue with whatever S/W you're using to read it.
The flash should not change your stock VID.

EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
 
EarlZ
Superclocked Member
  • Total Posts : 122
  • Reward points : 0
  • Joined: 2011/02/28 01:36:05
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/04 15:36:27 (permalink)
HeavyHemi

EarlZ

Im sure the SC has the same chip, its only 25Mhz more anyway..

Also with the fanspeed unlocker the stock VID is a bit higher.. my became 1.088v from 1.082v is this expected?

Hmm the VID is changed in steps. 1.088 is a valid VID 1.082 is not. That could be an issue with whatever S/W you're using to read it.
The flash should not change your stock VID.

 
MSI after burner, Wheres the vGPU voltage read out points on the EVGA card ill see with an actual volt meter.
cramsay
New Member
  • Total Posts : 29
  • Reward points : 0
  • Joined: 2005/06/24 11:18:24
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/14 23:14:23 (permalink)
I just flashed fan speed unlocker but my BIOS is .81   I have 2 SC GTX 580 Cards is this number I should have for BIOS is there another one I can go up to?
Mosher
iCX Member
  • Total Posts : 290
  • Reward points : 0
  • Joined: 2011/01/15 11:04:34
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/14 23:23:42 (permalink)
The unlocker version 1.1 BIOS is 70.10.20.00.81 and currently the most up to date.

i7 3770K - GTX 690 - AX850 
 

DiGiTaLdAzE
Superclocked Member
  • Total Posts : 136
  • Reward points : 0
  • Joined: 2007/08/20 16:51:38
  • Status: offline
  • Ribbons : 1
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/03/15 17:33:05 (permalink)
I just reached the front of the queue for a second 580. EVGA will likely receive my 480 in about two weeks--I cab't mail it until next week. Will the new 580 I receive have the new BIOS? If not, which approach would be best: remove my existing 580, install the new one and then flash it, or, could I leave the already installed 580 in place, enable SLI, and then flash both? I will be flashing the 580 I have now right away.
cramsay
New Member
  • Total Posts : 29
  • Reward points : 0
  • Joined: 2005/06/24 11:18:24
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/03/16 07:19:21 (permalink)
It will flash both cards to newest BIOS.  I find it funny BIOS version is .81 and not .83 but it will flash both in sli.  Can do it again when you get the other card.  I have to flash my 3rd card for tri sli.
NeVeRLiFt
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2008/06/04 00:47:27
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/01 04:45:42 (permalink)
I got this bios and tried it.
I was wondering if anyone else has noticed that with this bios when you start the newest version of windows live messenger for windows 7 64bit the videocard goes from 2d mode to 3d mode speeds and the temp of my videocard goes up
 
any ideal why this would happen and has anyone else noticed this?
 
edit:
never mind I see some things with this bios keep the card from going back to idle speeds, I seem to found windows live messenger is one of them ... at least for me
post edited by NeVeRLiFt - 2011/04/01 04:49:14
Sajin
EVGA Forum Moderator
  • Total Posts : 49055
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/02 16:41:35 (permalink)
Links are not working.
indicajones
New Member
  • Total Posts : 19
  • Reward points : 0
  • Joined: 2008/06/13 17:43:47
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/03 09:52:45 (permalink)
anyone have a different link for either the 1.0 or 1.1  standard gtx 580 fan unlocker. As previously stated the links are down.
EVGA_JacobF
EVGA Alumni
  • Total Posts : 11559
  • Reward points : 0
  • Joined: 2006/01/17 12:10:20
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 26
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/04 10:37:00 (permalink)
BIOS is back up, sorry for the issue guys.


topias94
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2010/02/06 10:24:00
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/10 07:39:40 (permalink)
gtx 580 black ops editon bios link is not working
topias94
New Member
  • Total Posts : 20
  • Reward points : 0
  • Joined: 2010/02/06 10:24:00
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/13 04:36:18 (permalink)
HELLO THE ORIGINAL BIOS AND BLACK OPS LINKS ARE STILL DOWN!!!!!!!!!!!!!
kimura
New Member
  • Total Posts : 46
  • Reward points : 0
  • Joined: 2010/07/26 15:25:25
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/17 11:51:09 (permalink)
I'm interested but I prefer to wait for a bios that clocks down the same as the card currently does. It's not a huge issue but I just thought I'd put it out there. That said I will probably be switching regardless once it starts getting warmer if my fan tops out, which it hasn't yet, but it has been a cool spring..
devsfan1830
Superclocked Member
  • Total Posts : 165
  • Reward points : 0
  • Joined: 2008/09/25 15:48:30
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/20 16:18:31 (permalink)
Need a link to the 1.0 unlocker fro the 580 GTX SC, the old link is broken. I updated to the 1.1 to fix a recurrence of my dual monitor issue and need to go back.

ASUS Prime Z370-A / Intel Core i7-8770K / Corsair Dominator Platinum 16GB (PC4 25600) / EVGA GeForce RTX 2080Ti FTW3 Ultra Gaming/ Creative Sound BlasterX AE-5 / Corsair AX1200 1200W PSU / Dell Alienware AW3418DW / Razer BlackWidow Chroma / Razer Deathadder Chroma
argh_sli
iCX Member
  • Total Posts : 385
  • Reward points : 0
  • Joined: 2010/08/12 17:49:48
  • Status: offline
  • Ribbons : 1
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/04/22 20:06:35 (permalink)
is the original pre-30% fan speed bios still available from evga up request?
 
i am curious to try it out because i flashed the bios as soon as i recieved my card and the card does not have enough factory voltage applied to it at stock clocks.  under certain DX environments it will hard-crash / black screen constantly unless i very slightly increase the vcore.  i am wondering if maybe the 30% fan speed flash had something to do with it.
Zettofaia
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2010/11/18 15:34:15
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/04/25 05:53:27 (permalink)
I would like to revert to the original BIOS too if that's possible, can we have a link for it please? (I have the SC/Black Ops edition)
gpvecchi
New Member
  • Total Posts : 71
  • Reward points : 0
  • Joined: 2009/04/19 12:35:57
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.1 Released - 1/13/2011 2011/04/25 13:57:39 (permalink)
Hallo, if I understand latest bios version in 70.10.20.00.82. Could someone please share this, in vanilla or superclocked edition, please?
post edited by gpvecchi - 2011/04/25 14:17:43

Krusher_r
Superclocked Member
  • Total Posts : 114
  • Reward points : 0
  • Joined: 2010/08/23 14:28:30
  • Status: offline
  • Ribbons : 0
Re:EVGA GTX 580 Fanspeed Unlocker v1.0 Released 2011/04/30 11:39:27 (permalink)
HeavyHemi

lb

I have a non-SC EVGA GTX 580 card.  Can I flash it with the SC BIOS?  Are the SC and non-SC cards identical hardware-wise, or does the SC version have better chips?


They are identical hardware wise. The SC cards are binned to operate at the higher clocks.
Yes it's possible to force flash the card with a BIOS that doesn't belong to it.

 
Does anyone know what EVGA's official policy is on doing this?  i.e. is the lifetime warranty coverage affected in any way if I should need to return it for service someday?
 
I know you can use EVGA Precision to overclock; I'm already a bit faster than an SC card now with no voltage boost.  I figure if I'm going to reflash the BIOS, I might as well give myself a small upgrade for those situations where Precision won't work (in Linux for example.)
 
Thanks!
post edited by Krusher_r - 2011/04/30 11:43:21
Page: << < ..678910.. > >> Showing page 9 of 11
Jump to:
  • Back to Mobile