EVGA

Hot!EVGA 30 Series Hydro Copper Updates

Page: < 12345.. > >> Showing page 4 of 17
Author
godzzzillla
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/12/06 07:10:23
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/13 14:19:50 (permalink)
slayertx
Well, I'm Just ready to finish this Darth Vader build already! Have a 2070 holding the place of the 3090



What are you using the reservoir for there though? You have an aio as well for the CPU. Also, is that the regular O11 or the O11 XL?  The way you've mounted the reservoir above the gpu seems to be the only way possible for a 3080 ftw ultra.
#91
Nereus
Insert Custom Title Here
  • Total Posts : 15034
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 46
Re: EVGA 30 Series Hydro Copper Updates 2020/10/13 14:33:06 (permalink)
Johnny_Utah
Just got my hands on a 3090 FTW3 Ultra today.  Looks like I'll be waiting at least a month for a block--EVGA/EK/Alphacool etc.  I don't see anything available.

How??? I wants!!! lol
 
Johnny_Utah 
Edit:  Just spoke with a rep from EK...blocks for FTW3 available late October, early November.

Yay! 
 
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (5-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)
  BUILD   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#92
codybarker
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2014/05/25 16:30:53
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/13 17:16:34 (permalink)
Just got my 3080 FTW Ultra in and if you own a Lian Li 011 dynamic unless you mount it vertically I don't think you are going to be able to water cool this card. Just an FYI.
#93
mchang1984
Superclocked Member
  • Total Posts : 114
  • Reward points : 0
  • Joined: 2018/06/07 21:35:19
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/13 18:49:57 (permalink)
I would love to see more pictures for the HC besides the one already on the site. I think it would be nice if we can get a closer look.
#94
maytheus
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2020/10/14 09:55:23
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 11:02:14 (permalink)
codybarker
Just got my 3080 FTW Ultra in and if you own a Lian Li 011 dynamic unless you mount it vertically I don't think you are going to be able to water cool this card. Just an FYI.




Why is that?  Just curious.  I am am about to build a new rig (first one in 8-9 years) and was looking at the 011 Dynamic as a case option.  TIA

ONLINE
CPU: Intel i9 10900k
MB: ASUS ROG Maximus Hero XII ~ PSU: eVGA 1000W T2 Titanium
RAM: 4x8GB G.Skill TridentZ Neo F4-3600C16D-16GTZN CL16-16-16-36
Video Card: eVGA RTX 3090 FTW3 Ultra
Case: Lian Li O11 Dynamic XL w/ Lian Li Unifan Case Fans
SSDs/HDDs: Sabrent Rocket 500gb PCI 4 NVMe SSD, Sabrent Rocket 2TB PCI 4 NVMe SSD
Display: LG 34GP83A-B 34" Ultrawide Curved QHD 1440p Monitor @ 144hz
Mouse: Logitech G900 ~ Mouse Mat: Gamers Nexus Mouse Mat
Keyboard: Logitech G910 ~ Sound: Schitt Hel External DAC w/ Sennhesier HD6XX Headset and Modmic
Watercooling: EK-Quantum Momentum Monoblock; EK GPU Block; Heatkiller Tube Res; EK Rads (PE360 and XE360)
#95
Dsullivan539
New Member
  • Total Posts : 48
  • Reward points : 0
  • Joined: 2018/07/27 11:42:27
  • Status: offline
  • Ribbons : 1
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 12:13:35 (permalink)
maytheus
codybarker
Just got my 3080 FTW Ultra in and if you own a Lian Li 011 dynamic unless you mount it vertically I don't think you are going to be able to water cool this card. Just an FYI.




Why is that?  Just curious.  I am am about to build a new rig (first one in 8-9 years) and was looking at the 011 Dynamic as a case option.  TIA




My FTW3 Ultra has the power cords pressed against the glass of the PC-011, 2-3mm wider and the card wouldn't have fit. I plan on putting this on a block (when I can) but I know I'll need to go up to the XL version of the 011 to fit it.
#96
Nereus
Insert Custom Title Here
  • Total Posts : 15034
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 46
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 12:42:04 (permalink)
 
Should be ok.. I believe the Lan Li 011 Dynamic is bigger than my Corsair 680X, and although the 680X is quite wide, it is very limited in depth (front to back). I have a 2080Ti FTW3 Ultra AiO in there now which is 290.83mm long and is mounted vertically using a riser cable. The EVGA 3090 FTW3 Ultra is 300mm long apparently. I just measured, and I currently have 52mm between the end of the 2080Ti and the front intake fans (it would only be about 40mm if mounted directly on the motherboard). I won't be able to fit a standard radiator in there, but a thin 30mm radiator like the Corsair XR5 will just fit with the 3090 at 300mm long, and allow ~10mm of wiggle room. I don't think even that would be doable without the vertical mount and riser cable. If the Hydro Copper is any longer than 310mm then I'm definitely out of luck. Compare the Lan Li to the 680X.
 
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (5-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)
  BUILD   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#97
Nereus
Insert Custom Title Here
  • Total Posts : 15034
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 46
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 12:45:03 (permalink)
 
I emailed EVGA about stand alone HC blocks.. the reply was still not definitive:
 
Hello,
Unfortunately, we do not have an official release date or pricing on the RTX 30-series Hydro Copper waterblocks quite yet. We are continuing to work on production and are unable to provide further details until that product is released. I apologize for any inconvenience and please feel free to contact us if you have any further questions.
Regards,
EVGA
 
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (5-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)
  BUILD   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

#98
wes_b
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2017/03/29 04:05:31
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 12:59:49 (permalink)
EVGA_JacobF
  • Latest availability update = Mid/late November
 
Is this a US only timeframe or will the EU also see them at this time? I don't want to wait 3 to 4 weeks only to be told that that timeframe was for the US and I wont see them in the EU till the new year. If this is the case I'll just try pick up a different card when they finally show up and stick an EK block on it.
#99
Pyro411
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2011/06/17 07:41:15
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 13:05:54 (permalink)
Oh man I'm looking forward to these cards / cooling solutions.  Sadly I'm running into the issue of not being able to get a card and the fact that the thinnest card I found was 2.2 slots where the NZXT H210i only has 2 slots with a very tiny bit of wiggle room below that before hitting metal :S
 
Anyone know off hand if the previous mentioned specs of the rad being 240MM are still valid or did they go up to 280MM?  Also any info on if the fans can be replaced easily or will it have built on fans with just enough wiggle room to change the fan orientation?
maytheus
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2020/10/14 09:55:23
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 13:38:04 (permalink)
Dsullivan539
maytheus
codybarker
Just got my 3080 FTW Ultra in and if you own a Lian Li 011 dynamic unless you mount it vertically I don't think you are going to be able to water cool this card. Just an FYI.




Why is that?  Just curious.  I am am about to build a new rig (first one in 8-9 years) and was looking at the 011 Dynamic as a case option.  TIA




My FTW3 Ultra has the power cords pressed against the glass of the PC-011, 2-3mm wider and the card wouldn't have fit. I plan on putting this on a block (when I can) but I know I'll need to go up to the XL version of the 011 to fit it.




 
Good to know. Thanks for the info!
post edited by maytheus - 2020/10/14 13:56:37

ONLINE
CPU: Intel i9 10900k
MB: ASUS ROG Maximus Hero XII ~ PSU: eVGA 1000W T2 Titanium
RAM: 4x8GB G.Skill TridentZ Neo F4-3600C16D-16GTZN CL16-16-16-36
Video Card: eVGA RTX 3090 FTW3 Ultra
Case: Lian Li O11 Dynamic XL w/ Lian Li Unifan Case Fans
SSDs/HDDs: Sabrent Rocket 500gb PCI 4 NVMe SSD, Sabrent Rocket 2TB PCI 4 NVMe SSD
Display: LG 34GP83A-B 34" Ultrawide Curved QHD 1440p Monitor @ 144hz
Mouse: Logitech G900 ~ Mouse Mat: Gamers Nexus Mouse Mat
Keyboard: Logitech G910 ~ Sound: Schitt Hel External DAC w/ Sennhesier HD6XX Headset and Modmic
Watercooling: EK-Quantum Momentum Monoblock; EK GPU Block; Heatkiller Tube Res; EK Rads (PE360 and XE360)
Dsullivan539
New Member
  • Total Posts : 48
  • Reward points : 0
  • Joined: 2018/07/27 11:42:27
  • Status: offline
  • Ribbons : 1
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 14:04:59 (permalink)
Nereus
 
Should be ok.. I believe the Lan Li 011 Dynamic is bigger than my Corsair 680X, and although the 680X is quite wide, it is very limited in depth (front to back). I have a 2080Ti FTW3 Ultra AiO in there now which is 290.83mm long and is mounted vertically using a riser cable. The EVGA 3090 FTW3 Ultra is 300mm long apparently. I just measured, and I currently have 52mm between the end of the 2080Ti and the front intake fans (it would only be about 40mm if mounted directly on the motherboard). I won't be able to fit a standard radiator in there, but a thin 30mm radiator like the Corsair XR5 will just fit with the 3090 at 300mm long, and allow ~10mm of wiggle room. I don't think even that would be doable without the vertical mount and riser cable. If the Hydro Copper is any longer than 310mm then I'm definitely out of luck. Compare the Lan Li to the 680X.
 
 


It's not the length thats the issue. It's the width. PC011 is limited in what GPUs it fits based on width without a vertical mount.
slayertx
New Member
  • Total Posts : 50
  • Reward points : 0
  • Joined: 2011/09/02 15:31:25
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 16:29:11 (permalink)
godzzzillla
slayertx
Well, I'm Just ready to finish this Darth Vader build already! Have a 2070 holding the place of the 3090



What are you using the reservoir for there though? You have an aio as well for the CPU. Also, is that the regular O11 or the O11 XL?  The way you've mounted the reservoir above the gpu seems to be the only way possible for a 3080 ftw ultra.


 
I have the 011 XL. The res is positioned for the GPU loop alone. I wanted the zkracken LCD for the CPU loop for the GIF ability. I have also added a stat mini display since I made that gif.   I decided to setup a test loop to test all the parts until i get the GPU/block as nothing sucks worse than having parts and finding out months later you have a problem and can't return it.  + there is actually a figurine I molded in the res and I wanted to make sure there was no degradation before the full loop is in effect.  

dam the man, save the empire
Nereus
Insert Custom Title Here
  • Total Posts : 15034
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 46
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 16:58:08 (permalink)
Dsullivan539
Nereus
Should be ok.. I believe the Lan Li 011 Dynamic is bigger than my Corsair 680X, and although the 680X is quite wide, it is very limited in depth (front to back). I have a 2080Ti FTW3 Ultra AiO in there now which is 290.83mm long and is mounted vertically using a riser cable. The EVGA 3090 FTW3 Ultra is 300mm long apparently. I just measured, and I currently have 52mm between the end of the 2080Ti and the front intake fans (it would only be about 40mm if mounted directly on the motherboard). I won't be able to fit a standard radiator in there, but a thin 30mm radiator like the Corsair XR5 will just fit with the 3090 at 300mm long, and allow ~10mm of wiggle room. I don't think even that would be doable without the vertical mount and riser cable. If the Hydro Copper is any longer than 310mm then I'm definitely out of luck. Compare the Lan Li to the 680X.

It's not the length thats the issue. It's the width. PC011 is limited in what GPUs it fits based on width without a vertical mount.

Ahhh ok, never mind then, lol.
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (5-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)
  BUILD   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

aberdie
SSC Member
  • Total Posts : 855
  • Reward points : 0
  • Joined: 2007/08/05 14:39:18
  • Status: offline
  • Ribbons : 9
Re: EVGA 30 Series Hydro Copper Updates 2020/10/14 20:48:48 (permalink)
So can we pre order or get elite member privileges?


UltimateBMWfan
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2012/04/11 10:07:10
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 02:13:26 (permalink)
wes_b
EVGA_JacobF
  • Latest availability update = Mid/late November
 
Is this a US only timeframe or will the EU also see them at this time? I don't want to wait 3 to 4 weeks only to be told that that timeframe was for the US and I wont see them in the EU till the new year. If this is the case I'll just try pick up a different card when they finally show up and stick an EK block on it.


 
Good point. Going off of how the current card situation is, I'm a bit worried about the EU release.
 
Pyro411
Oh man I'm looking forward to these cards / cooling solutions.  Sadly I'm running into the issue of not being able to get a card and the fact that the thinnest card I found was 2.2 slots where the NZXT H210i only has 2 slots with a very tiny bit of wiggle room below that before hitting metal :S
 
Anyone know off hand if the previous mentioned specs of the rad being 240MM are still valid or did they go up to 280MM?  Also any info on if the fans can be replaced easily or will it have built on fans with just enough wiggle room to change the fan orientation?



I think you're looking for the Hybrid thread and not this one, this is for the HC, which is a full waterblock for custom loops :)
zogge
New Member
  • Total Posts : 68
  • Reward points : 0
  • Joined: 2020/10/12 02:59:38
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 02:18:39 (permalink)
Is it possible as an owner to FTW3 3090 to use the stepup to a hydro copper version of 3090 ? 
dominic2189
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2012/04/20 14:51:54
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 02:48:40 (permalink)
zogge
Is it possible as an owner to FTW3 3090 to use the stepup to a hydro copper version of 3090 ? 

Probably not
Infin1tum
New Member
  • Total Posts : 55
  • Reward points : 0
  • Joined: 2020/06/14 03:33:07
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 05:15:08 (permalink)
maytheus
codybarker
Just got my 3080 FTW Ultra in and if you own a Lian Li 011 dynamic unless you mount it vertically I don't think you are going to be able to water cool this card. Just an FYI.




Why is that?  Just curious.  I am am about to build a new rig (first one in 8-9 years) and was looking at the 011 Dynamic as a case option.  TIA




I am using an O11D and can confirm this. It's just too thick. With the standard air cooler you have barely enough clearance to get the power cables in. No way it will accomodate ports of a waterblock.
multigl-evga
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2020/10/15 08:05:21
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 08:10:38 (permalink)
EKWB now has pre-ordering available for XC3 3080/3090, Nickel + Plexiglas and Nickel + Acetal, including back plates. Looks like they're saying they'll ship in November.
Pyro411
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2011/06/17 07:41:15
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 08:57:52 (permalink)
UltimateBMWfan
 
I think you're looking for the Hybrid thread and not this one, this is for the HC, which is a full waterblock for custom loops :)

Oops yeah that's my bad, too many tabs open at once :) -- You know how it goes, 3 billion tabs open 2 frozen and one playing music randomly lol
 
Okay for this one that I was meaning to post last night... -- Sorry if these questions are super simple & I overlooked the answer in a previous page. :) It's my first dive into potentially doing a custom loop and I'm jumping head first into a mini itx build.
 
Would the custom water block shrink the card down to a single slot or is it sitting at 1.2-2 slot?
Will it ship with a replacement single slot bracket, or will one be available to order separately?  -- I did see the reply about potential weight issues but bracing the back end of the card wouldn't be too much of an issue.
Will it ship pre pasted & marked locations for the pads?
Any word on dimensions of the cooler, specifically roughly where the fittings will be from the ends of the card?
 
Now the ultimate crazy question about warranty...
Seeing as it is a first party cooling solution replacement, if the card does randomly fail and need to go in for RMA "super rare but does happen" will I need to dust off the air cooler and re-assemble it since it wasn't a Hydro Copper SKU "I'm assuming this is the case" or could it be sent in as is and repaired/replaced with the proper card/cooler replacement?
dominic2189
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2012/04/20 14:51:54
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/15 18:34:20 (permalink)
godzzzillla
Is it possible to know the dimensions of the HC for FTW3? I'm looking for cases to buy for this but its such a pain to get the right case. Most mid towers don't seem to have enough headroom for the ftw3 waterblock (based on pcb dimensions) if mounting the pump/res next to it.

I was thinking of this too, but I can't imagine it being longer than the standard ftw3 itself.
Infin1tum
New Member
  • Total Posts : 55
  • Reward points : 0
  • Joined: 2020/06/14 03:33:07
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 05:14:54 (permalink)
check the size of the PCB, thats usually how big the block will be plus the G1/4 ports on the side.
antarious
New Member
  • Total Posts : 77
  • Reward points : 0
  • Joined: 2007/06/03 19:12:25
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 05:48:06 (permalink)
Dsullivan539
Nereus
 
Should be ok.. I believe the Lan Li 011 Dynamic is bigger than my Corsair 680X, and although the 680X is quite wide, it is very limited in depth (front to back). I have a 2080Ti FTW3 Ultra AiO in there now which is 290.83mm long and is mounted vertically using a riser cable. The EVGA 3090 FTW3 Ultra is 300mm long apparently. I just measured, and I currently have 52mm between the end of the 2080Ti and the front intake fans (it would only be about 40mm if mounted directly on the motherboard). I won't be able to fit a standard radiator in there, but a thin 30mm radiator like the Corsair XR5 will just fit with the 3090 at 300mm long, and allow ~10mm of wiggle room. I don't think even that would be doable without the vertical mount and riser cable. If the Hydro Copper is any longer than 310mm then I'm definitely out of luck. Compare the Lan Li to the 680X.
 
 


It's not the length thats the issue. It's the width. PC011 is limited in what GPUs it fits based on width without a vertical mount.

Yes...  I have a PC011 Dynamic and an XL.  The issue with the first one if your power cables are touching the glass already.  When you put a block on your card it adds width.  My Dynamic has a 1080 that came with a factory block.  The only way I could mount it normally would be to leave the side panel off and have the block stick out of the case.  So I purchased a vertical mount kit.  In the Dynamic that takes away any possibility of using the bottom of the case.  There just is not room for anything else down there.
 
The XL on the other hand even with a vertical kit in it I can mount a radiator in the bottom.  It would limit how thick the radiator could be but you can still have one.  The other thing I like with the XL is since I can use the top and bottom regardless...  I used one of those EK Quantum D5 FLT's.  I might eventually go hardline and get a distro plate but I think that FLT looks really sharp in this case.
 
Of course I'm waiting to see some options so I can add my FTW3 Ultra when I eventually get it.. to my loop.
Sawborg
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/02/10 21:48:22
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 09:55:21 (permalink)
Excited for this. I’m waiting on these to build my first custom water loop with an RTX 3080 in my rig. Can’t wait!
sniper680
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2020/09/18 18:49:12
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 12:21:36 (permalink)

buttabean
Superclocked Member
  • Total Posts : 224
  • Reward points : 0
  • Joined: 2018/01/29 15:32:46
  • Status: offline
  • Ribbons : 2
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 12:25:15 (permalink)
Pyro411
UltimateBMWfan
 
Now the ultimate crazy question about warranty...
Seeing as it is a first party cooling solution replacement, if the card does randomly fail and need to go in for RMA "super rare but does happen" will I need to dust off the air cooler and re-assemble it since it wasn't a Hydro Copper SKU "I'm assuming this is the case" or could it be sent in as is and repaired/replaced with the proper card/cooler replacement?



I'm pretty sure any mods to the original card need to be removed and put back to original state for rma

Associate Discount Code: KQ9JGG4415FXHVQ 
dominic2189
New Member
  • Total Posts : 78
  • Reward points : 0
  • Joined: 2012/04/20 14:51:54
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 12:58:26 (permalink)
Dsullivan539
It's not the length thats the issue. It's the width.

Yes yes, she agrees.
Infin1tum
New Member
  • Total Posts : 55
  • Reward points : 0
  • Joined: 2020/06/14 03:33:07
  • Status: offline
  • Ribbons : 0
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 13:03:33 (permalink)
antarious
Dsullivan539
Nereus

Should be ok.. I believe the Lan Li 011 Dynamic is bigger than my Corsair 680X, and although the 680X is quite wide, it is very limited in depth (front to back). I have a 2080Ti FTW3 Ultra AiO in there now which is 290.83mm long and is mounted vertically using a riser cable. The EVGA 3090 FTW3 Ultra is 300mm long apparently. I just measured, and I currently have 52mm between the end of the 2080Ti and the front intake fans (it would only be about 40mm if mounted directly on the motherboard). I won't be able to fit a standard radiator in there, but a thin 30mm radiator like the Corsair XR5 will just fit with the 3090 at 300mm long, and allow ~10mm of wiggle room. I don't think even that would be doable without the vertical mount and riser cable. If the Hydro Copper is any longer than 310mm then I'm definitely out of luck. Compare the Lan Li to the 680X.




It's not the length thats the issue. It's the width. PC011 is limited in what GPUs it fits based on width without a vertical mount.

Yes...  I have a PC011 Dynamic and an XL.  The issue with the first one if your power cables are touching the glass already.  When you put a block on your card it adds width.  My Dynamic has a 1080 that came with a factory block.  The only way I could mount it normally would be to leave the side panel off and have the block stick out of the case.  So I purchased a vertical mount kit.  In the Dynamic that takes away any possibility of using the bottom of the case.  There just is not room for anything else down there.
 
The XL on the other hand even with a vertical kit in it I can mount a radiator in the bottom.  It would limit how thick the radiator could be but you can still have one.  The other thing I like with the XL is since I can use the top and bottom regardless...  I used one of those EK Quantum D5 FLT's.  I might eventually go hardline and get a distro plate but I think that FLT looks really sharp in this case.
 
Of course I'm waiting to see some options so I can add my FTW3 Ultra when I eventually get it.. to my loop.


you can still mount fans on the bottom of the case. see on page 2 or 3 of this thread, there is a picture of my setup with a 2080S FTW3
Nereus
Insert Custom Title Here
  • Total Posts : 15034
  • Reward points : 0
  • Joined: 2009/04/09 20:05:53
  • Location: Brooklyn, NYC.
  • Status: offline
  • Ribbons : 46
Re: EVGA 30 Series Hydro Copper Updates 2020/10/16 15:01:10 (permalink)
 
FYI, posted by Gutcheck in another thread:  ..looks like the price for the EK blocks will be close to US$200.
 
https://www.ekwb.com/news/ek-releases-another-vector-water-block-this-time-for-evga-xc3-rtx-3080-3090-gpus/

EK Upcoming NVIDIA RTX 30 Series Water Blocks

There are probably a lot of questions about other RTX 30 Series water blocks as well – for the AIB cards and Founders Edition especially. EK water blocks for FTW3 Series graphics cards will follow in a matter of weeks, while the Founders Edition water blocks will take a bit longer since EK is preparing something really special for those graphics cards.
 

ASSOCIATE CODE : CSKKXUT5Q9GVAFR (5-10% off EVGA.com purchases)   |   AFFILIATE/REWARDS CODE : E64DMBSMI6 (EVGA product registration)
  BUILD   |   MINI-ITX BUILD   |   MODSRIGS $1K WIN   |   HEATWARE

Page: < 12345.. > >> Showing page 4 of 17
Jump to:
  • Back to Mobile