z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/22 15:09:41
(permalink)
Using my noodle to think up of a way to build my own mining case. I found some 3/4 in. x 36 in. Aluminum Angle Bar that is only 1/16th in. thick. Should be perfect for a build. Rivet that together and you can have a pretty decent open air case.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
_Nite_
Omnipotent Enthusiast
- Total Posts : 14962
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re: DIY Open Air Cases?
2014/03/22 16:28:37
(permalink)
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/22 17:06:32
(permalink)
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re: DIY Open Air Cases?
2014/03/22 21:02:40
(permalink)
z3r0t0l0rence Hey direraptor22, Were you able to get the blueprints for the mining case?
Yep, coming right up... got some copying and pasting to do. Gimme a few seconds
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re: DIY Open Air Cases?
2014/03/22 21:27:55
(permalink)
Go to Home Depot or Lowe's and buy those tall pieces of aluminum angle rods. Get the 1/2" and 3/4" wide ones. Cut them to the dimensions I'm about to give you! Now cut the following... quantity/length/rod width: 1 x 9.5" long 1/2" wide 3 x 10.75" long 1/2" wide 8 x 11" long 3/4" wide 4 x 22" long 3/4" wide 2 x 21.75" long 3/4" wide 1 x 9.375" long 1/2" wide 1 x 7.125" long 1/2" wide Now, the 22" and 11" make up the top and bottom of the case, aka the rectangle. The other 4 x 11" ones are the 4 vertical outer pillars. The rest is a little harder to explain, but here are some progress pics: 11" and 22" top and bottom rectangles Top and bottom joined by the 4 x 11" pillars 10.75" horizontal supports around the middle (third one is for the PSU support as you'll see in the next pic) Here's the completed case Basically, the two PSUs sit on top of each other on the left side of the case in the picture, and mobo is mounted to the bottom on a piece of thin MDF riveted into the case. The 2 x 21.75" rods are for the GPU support. One higher up to support the bracket, and the other lower on the other side to support the other side. I just zip tied them into place. Just so you get the idea etc. sorry it's not extremely detailed, it's much easier to explain in person than post in a forum. Hopefully you get the idea! Any questions I'll try my best to answer as well!
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/22 22:24:54
(permalink)
That is more than perfect. That is going to help a ton.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re: DIY Open Air Cases?
2014/03/23 00:52:22
(permalink)
z3r0t0l0rence That is more than perfect. That is going to help a ton.
Looking forward to the first person replicating that design and working out well for them. Feel free to add any suggestions or design recommendations!
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/23 18:30:12
(permalink)
So I got all the pieces for the mining case. Cost came to $41.81 in materials including the rivets. Had to sub out some of the pieces as they didn't have them in stock. I was speaking with the dept mgr who did know quite a bit so I trusted his judgement. I gave him the dimensions and showed him the pic of what I was building. He immediately pulled out the measuring tape and got to work. I still need to make the cuts needed but I he was impressed with the design in what we are using it for. What I got: 2x $4.27: 36"X3/4"X1/2"X1/16" THICK ALUMINUM ANGLE and 7x $3.97: 36"X3/4"X1/16" THICK ALUMINUM ANGLE
post edited by z3r0t0l0rence - 2014/03/23 19:59:29
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/27 10:21:00
(permalink)
Build will start today when i get home. I'll be posting pics as I go along. I'll be as detailed as possible so others can see each step to show how easy this is going to be to do.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: DIY Open Air Cases?
2014/03/27 10:26:44
(permalink)
z3r0t0l0rence Build will start today when i get home. I'll be posting pics as I go along. I'll be as detailed as possible so others can see each step to show how easy this is going to be to do.
Should start a new thread just for that, so it'll be in the 1st post and easy to find by other given a good Thread title as well.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/27 10:50:51
(permalink)
True. This one we can use it to share ideas and other cases we find. Use the other for a true DIY/Build thread. Should I change the title of this thread?
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: DIY Open Air Cases?
2014/03/27 11:00:49
(permalink)
Naw this one should be fine as is.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/28 11:57:24
(permalink)
Looking at amazon what would you guys recommend for risers? NON PCIE 3.0.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
direraptor22
CLASSIFIED ULTRA Member
- Total Posts : 5537
- Reward points : 0
- Joined: 2008/10/14 00:35:57
- Location: Optimal cruise altitude!
- Status: offline
- Ribbons : 16
Re: DIY Open Air Cases?
2014/03/29 00:07:38
(permalink)
I use the USB 3.0 risers. Work better than the regular powered risers.
“The fascination of flight can't be expressed with words. But it really lies beyond the capabilities of human endeavor. Once you've experienced it, you'll never be able to forget it.” - Friedrich Oblessor
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
Re: DIY Open Air Cases?
2014/03/29 02:10:44
(permalink)
here is my idea i came up with (used another gpu model just for) 3 on the back of 3 fans at the bottom of my 900D holding 5X 750 Ti's leaving my 780 ti up top for use (short cards fit lol with room for fans on both sides) i have 6 750 ti SC's on hand as of today this simple idea uses 1/2"X1/2" C-channel and 1/2" strip from home depot all cut to 120mm simple idea parts list 2X 120mm long 0.5x0.5 C-channel 1x 120mm long 1/2"x1/16 3x 1/8th ID washers 2~2.5mm thick (1.5 for a tight fit) 3x 1/8 x 3/8 long rivets 4X self tapping fan screws 2X case / thumb screws (if you use tap) tools needed to make right 6-32 tap and matching drill bit 1/8, 1/4, 3/8 drill bits something that cuts clean will post drawings if requested will post photos tomorrow when i build them 2 am time for bed. at least i got a free 30 sec foot massage tonight.. lol got to love socal 1 little earthquake and all the earthquacks come out
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/29 07:11:56
(permalink)
direraptor22 I use the USB 3.0 risers. Work better than the regular powered risers.
Won't work with non 3.0 mobo's though. So I have to use ribbon only correct?
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
Re: DIY Open Air Cases?
2014/03/29 09:08:51
(permalink)
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/29 09:48:29
(permalink)
Second link takes me just to amazon.com main page. I'm on my phone so that might be why. Lol
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
foxmino
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2008/04/17 02:25:41
- Location: Denver, CO
- Status: offline
- Ribbons : 0
Re: DIY Open Air Cases?
2014/03/30 00:56:17
(permalink)
What do you use to mount the motherboard? is that a piece of cardboard?
Asus Z790 Apex 13900ks Custom water cooling Msi 4090 Suprim Liquid V color 7800mhz A die memory Seagate Firecuda 4tb Evga 1300watt G plus Lian Li PC-011 Dynamic evo HeatWare http://www.heatware.com/eval.php?id=76088
|
TheWolf
CLASSIFIED Member
- Total Posts : 3800
- Reward points : 0
- Joined: 2007/11/14 16:05:23
- Location: Moss Point, Ms
- Status: offline
- Ribbons : 9
Re: DIY Open Air Cases?
2014/03/30 09:23:53
(permalink)
Looks like fiber board and normal motherboard standoffs to me.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/30 09:58:54
(permalink)
foxmino What do you use to mount the motherboard? is that a piece of cardboard?
Its MDF.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
techmasterjoe
iCX Member
- Total Posts : 282
- Reward points : 0
- Joined: 2008/12/20 18:33:05
- Location: Orange CA
- Status: offline
- Ribbons : 5
Re: DIY Open Air Cases?
2014/03/30 22:58:46
(permalink)
go to home depot and look for door skin it's mdf fiber board 3/16~1/4 inch will work well. or even pegboard
post edited by techmasterjoe - 2014/03/30 22:59:50
Home =dual gigabit fiber >ONT> Rig One > UniFi POE switch > 5X UniFi AP's Rig #1 (ESXi pfSense, L3 Firewall, Deep Packet, VPN's, OwnCloud)8700k at 5.0Ghz, 64GB AsRock Z370 itx, FD node 303 case 1x intel X740 Quad SFP+ 2 fiber & 2 RJ45, 6x10TB WD Red's (single disk redundant) 1TB samsung mSata for VM's Rig #2 9900K OC'd to 5.1, 32GB OC'd to 4200, EKWB single loop (360 XE + 120 SE rads) AsRock Taichi Ultimate, EVGA 1000w G3, 1x 2080 ti XC2 ultra, EVGA DG-77 stickers removed 3d printed spacers add 4mm extra gap to front glass and printed pump mount.
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/03/31 19:20:29
(permalink)
Got all my measurements and cuts done. I was short 2 x 21.75" long 3/4" wide pieces. Heading to home depot now to get them. Also I'm going to sacrifice my old Thermaltake Lanfire case. It's had a long 10yr life span and many different builds done with it. I'll be using the motherboard tray and whatever else I can make use of.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/04/06 13:13:06
(permalink)
direraptor22 Go to Home Depot or Lowe's and buy those tall pieces of aluminum angle rods. Get the 1/2" and 3/4" wide ones. Cut them to the dimensions I'm about to give you!
Now cut the following... quantity/length/rod width: 1 x 9.5" long 1/2" wide 3 x 10.75" long 1/2" wide 8 x 11" long 3/4" wide 4 x 22" long 3/4" wide 2 x 21.75" long 3/4" wide 1 x 9.375" long 1/2" wide 1 x 7.125" long 1/2" wide Now, the 22" and 11" make up the top and bottom of the case, aka the rectangle. The other 4 x 11" ones are the 4 vertical outer pillars. The rest is a little harder to explain, but here are some progress pics: 11" and 22" top and bottom rectangles
Top and bottom joined by the 4 x 11" pillars
10.75" horizontal supports around the middle (third one is for the PSU support as you'll see in the next pic)
Here's the completed case
Basically, the two PSUs sit on top of each other on the left side of the case in the picture, and mobo is mounted to the bottom on a piece of thin MDF riveted into the case. The 2 x 21.75" rods are for the GPU support. One higher up to support the bracket, and the other lower on the other side to support the other side. I just zip tied them into place. <<< Is that a square piece that is about 3/4-1" below that top support?
Just so you get the idea etc. sorry it's not extremely detailed, it's much easier to explain in person than post in a forum. Hopefully you get the idea! Any questions I'll try my best to answer as well!
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
_Nite_
Omnipotent Enthusiast
- Total Posts : 14962
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re: DIY Open Air Cases?
2014/04/06 14:41:31
(permalink)
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/04/06 15:08:04
(permalink)
_Nite_ Yes its square Zero
yeah i got it. cost me $11.47 for that one 36" piece!
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|
_Nite_
Omnipotent Enthusiast
- Total Posts : 14962
- Reward points : 0
- Joined: 2007/04/18 15:35:04
- Location: Sumner, Washington
- Status: offline
- Ribbons : 46
Re: DIY Open Air Cases?
2014/04/06 15:14:41
(permalink)
Gaming Rig: AMD Ryzen 7 2700x @ 4.25Ghz - Asrock B450 Pro 4 - 16GB Crucial Ballistix DDR4 3000 - 240GB SSD (OS), 1TB ADATA SU800 SSD and 2TB ADATA SX8200 Pro M2 NVME (Games) - 8GB RTX 3070 XC3 Ultra - Sound Blaster Audigy 5 RX - EVGA Supernova 750w G2 - Antec 302 - 24" Asus VG248QE
|
z3r0t0l0rence
Omnipotent Enthusiast
- Total Posts : 8422
- Reward points : 0
- Joined: 2009/10/08 10:14:51
- Location: Arizona
- Status: offline
- Ribbons : 20
Re: DIY Open Air Cases?
2014/04/06 15:21:56
(permalink)
yeah well...i would have had to converted ltc to doge then do all that....meh. not too worried about it.
i7 930 OC 4.21 EVGA E758 GSkill 12GB Evga GTX 780 SC 2x Kingston 240 Raid 0 2x Seagate 4TB
|