AHowes

FROSTYBE3R
Hitting power limit at 320w lol http://imgur.com/TKO9L1C
http://imgur.com/oIPUgmM

Using newer drivers then 425.31? Thet will cause px1 to not be able to set max power. You have to run px1 in administer mode to get px1 to be able to use max power.

I did not know this and was like **** is going on with PX1 on 430.5x.  Like I remember reading it but it never registered untel now thx for that.

Or the Room Temperatures were not the same during testing.

FROSTYBE3R

AHowes
:/ dont have that game to test to see if I have the same issue.

Just got done flashing the Ln2 bios to the OC switch position and wow! Huge difference in fan speed for the card fan. Before on the OC switch I seen 2400rpm and now 3706rpm! I can hear her now lol.

Let's check those default temps in icx before and after.. default

Before/After

Mem1= 40c /35c
Mem2= 37c/32c
Mem3= 28c/23c
GPU1= 27c/23c
GPU2= 30c/27c
PWR1= 31-32C / 29C
PWR2= 27C / 24-25C
PWR3= 30-31C / 25C
PWR4= 32-31C / 26-27C
PWR5= 24C / 23C

Hold it all that info is going to be off as the new temps are from running the card at 1350mhz.. it wont boost to 2055 at default like prior. :/

Yeah had fun remembering why the power limit would not stick after upgrading from 425.31 drivers to the newest 430.64.

I'll mess with it some more.. prob have to have px1 use prior settings on load? That's prob it. As its boosting to 2055mhz on load.

So maybe the next boot I can edit this post to show some kinda idea of the difference of board temps with ln2 bios used flashed to the oc switch position.

Sounds like you broke your card with the flash.

Thats what the fans are supposed to do when the LN2 bios are flashed to the OC position, nothing is broke. Gives maximum fan speeds but leaves the temperature safeguards in place. I did it first thing when i got my cards. https://xdevs.com/guide/2080ti_kpe/

FROSTYBE3R

dwexpress

FROSTYBE3R

AHowes
:/ dont have that game to test to see if I have the same issue.

Just got done flashing the Ln2 bios to the OC switch position and wow! Huge difference in fan speed for the card fan. Before on the OC switch I seen 2400rpm and now 3706rpm! I can hear her now lol.

Let's check those default temps in icx before and after.. default

Before/After

Mem1= 40c /35c
Mem2= 37c/32c
Mem3= 28c/23c
GPU1= 27c/23c
GPU2= 30c/27c
PWR1= 31-32C / 29C
PWR2= 27C / 24-25C
PWR3= 30-31C / 25C
PWR4= 32-31C / 26-27C
PWR5= 24C / 23C

Hold it all that info is going to be off as the new temps are from running the card at 1350mhz.. it wont boost to 2055 at default like prior. :/

Yeah had fun remembering why the power limit would not stick after upgrading from 425.31 drivers to the newest 430.64.

I'll mess with it some more.. prob have to have px1 use prior settings on load? That's prob it. As its boosting to 2055mhz on load.

So maybe the next boot I can edit this post to show some kinda idea of the difference of board temps with ln2 bios used flashed to the oc switch position.

Sounds like you broke your card with the flash.

Thats what the fans are supposed to do when the LN2 bios are flashed to the OC position, nothing is broke. Gives maximum fan speeds but leaves the temperature safeguards in place. 

I meant the 1350mhz boost

It will still boost to 2055mhz on 3dload at default settings as normal. Just not holding at the desktop like prior even though I have the nvidia control panel set to prefer max performance like before.

So with that being said I cant accurately compare tempts between the OC and ln2 at default and idle. :/

Now to test the card again at 2190 and figure that out. :/

oscyjack
friggin time spy doesnt like the mem over +700 on my card and barely gets by at +20 on the core. :/. Runs superposition 4k at +1400 though.
tbh its gaming the best at stock clocks (2100+/-). I am a little dissapointed on the memory side, seems like +800 is game friendly. My black did 1k easy peasy. way higher fps and more consistent fps with this card though. I bumped myself up to position #34 on super https://benchmark.unigine.com/results/rid_c3f430f740254c69b6570bea478bc33b 

nice score on Super Position v1.1 4K oscyjack, #31 
my best Super Position v1.1 4K score is 14021 #41
Time spy and Fire Strike 1080P benchmarks are difficult for me, I cant get close to the HOF board on them.
Im most impressed with my Port Royal score 10087 i have the top 7 scores in my cpu/ #1 gpu class, and #37 on the HOF.
 

Nvidia control panel\3d settings\ prefer max perf for the power setting. If that doesn’t work use profile inspector to set the power state

Sounds like registry issues. If you are still annoyed by the current state you could follow bcavs px1 removal procedure or use rivatuner it’s still pretty thorough with uninstalls. Still think nvidia inspector and profile inspector is the way to go when drivers and the extensions start acting out.

Also could try BCavs cold boot method. Remove all charge from card and board and then cold boot
 
@oscyjack
Give the NVRAM more voltage with the classy tool. It is samsung so as long as stays cool it scales with voltage. Also the vmem likes to run at specific frequencies. Not exactly harmonics but lets just generalize that it may not like 800 but could  run fine at 960, 1000, 1200 ect... Also if you adjust the mem clock and then run a portion of a bench for example firestrike GT2 and it fails. Give it about 3 tries before you throw in the towel on that particular tuning value. Sometimes the KPE needs to settle in with its new value.

TwoEvilOne

oscyjack
friggin time spy doesnt like the mem over +700 on my card and barely gets by at +20 on the core. :/. Runs superposition 4k at +1400 though.
tbh its gaming the best at stock clocks (2100+/-). I am a little dissapointed on the memory side, seems like +800 is game friendly. My black did 1k easy peasy. way higher fps and more consistent fps with this card though. I bumped myself up to position #34 on super https://benchmark.unigine.com/results/rid_c3f430f740254c69b6570bea478bc33b 

nice score on Super Position v1.1 4K oscyjack, #31 
my best Super Position v1.1 4K score is 14021 #41
Time spy and Fire Strike 1080P benchmarks are difficult for me, I cant get close to the HOF board on them.
Im most impressed with my Port Royal score 10087 i have the top 7 scores in my cpu/ #1 gpu class, and #37 on the HOF.
 

Thanks! I think I might been gunning for ya hababa

My highest so far is 15299 but I haven't tried the mem settings yet. That score was like 500 on mem and 20 on the clock, stock otherwise

bcavnaugh
3DMark is back
 

That's a lot of tests.

TwoEvilOne

bcavnaugh
3DMark is back
 

i see who broke the 3DMark with 2381 runns at it. LOL 

Glad to see someone else with a ton of benches as mine was pretty high near 1000 I think! Haha

Edit 1052 to be exact.. and most spent on firestrike at 967 haha.

Scary thing is that's prob 800+ driving blind as the kingpin has already thought me alot!

bcavnaugh
Mine go back as for as the GTX 580 Ti or was it 570

That's ok! Haha mine prob goes back just as far.. prob 480 as I had triple 480 sli for a month and then quad 580 sli. Both a huge waste of money.. but didnt learn and then quickly bought 4x 7970 cards.. that's was faster but a huge waste as the drivers would only use 3 cards.

Zeddivile
@oscyjack nice score
 
Superposition 4K #5
https://benchmark.unigine...0e479f93cdd2d45e130b1b

Thanks buddy, you too! Nice clocks too damn!

When I get my z390 dark in I'm hoping Ill get some more outta the CPU.

oscyjack

Zeddivile
@oscyjack nice score
 
Superposition 4K #5
https://benchmark.unigine...0e479f93cdd2d45e130b1b

Thanks buddy, you too! Nice clocks too damn!

When I get my z390 dark in I'm hoping Ill get some more outta the CPU.

You may want to look in another direction to get more out of your CPU. That board will only loose you points. Return to sender if you can.

VRAY on the kingpin outperforms the other models by quite a margin.

https://i.imgur.com/jaxh12Wh.jpg