EVGA

Helpful Reply3090FTW3 Hybrid Port Royal Results

Page: << < ..678910.. > >> Showing page 9 of 11
Author
Post
Essentials Only Full Version
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 10:17:18 (permalink)
I'll check when I get home. Thanks for your input. I reached out to Jacob and he stated that 70C is what is expected gaming. So looks like all is good.

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#241
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 10:18:43 (permalink)
wwxww
eg1122
Ok I have a few concerns about my 3090 ftw3 RMA card. Compared to my original card that died, temps are about 10c warmer and PR scores are lower in general. Card idles around 2c above room temperature but while playing the division 2 it's steady at 65c no matter how fast the fans are. I've seen it hit 70c once during the game. This is with a room temp of 25c. Even with fans at 100% and case door off it still 60c+. What do you guys think? Think I should reach out to evga? Or is this within normal temps for hybrids? This is my first hybrid card ever.

 
 
I consider 22c a warm room. Have reasonable expectations with this powerful card.
I completely understand that. It's just that compared to my first card this one is way warmer. But just confirmed with Jacob via Twitter that 70c is an expected temp on the hybrid.

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#242
wwxww
iCX Member
  • Total Posts : 462
  • Reward points : 0
  • Joined: 2019/01/13 09:30:51
  • Location: New Orleans
  • Status: offline
  • Ribbons : 1
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 10:22:39 (permalink)

 
 
 
 
edited first post   meant 25c
post edited by wwxww - 2020/12/14 10:55:21
#243
EVGA1225
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2020/12/07 12:05:44
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 10:52:53 (permalink)
In the past I've seen significant temp improvements by redoing the thermal paste with high end thermal paste. The manufacturer don't always seat the heat sink correctly. Maybe give that a try.
#244
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 10:54:27 (permalink)
I have some Kryonaut. Would that work?

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#245
EVGA1225
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2020/12/07 12:05:44
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 11:43:12 (permalink)
Kryonaut has been king for the past many years. There are a few more recent paste that supposedly beat it by a bit but real world performance test varies. Thermal Grizzly also just released the Kryonaut Extreme but doubt you will see any noticeable difference. Any of these paste will perform better than stock paste as manufacturers usually won't pay the premium for these high end paste.
#246
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 13:57:10 (permalink)
So I swapped out the thermal paste....O....M...G..... What a difference. PR Score went up a bit on default settings 13595 vs 13533. Max temp was 55C vs 61C.

So running some stress tests with +250 memory and +125 core and power set to 107% and it hits 60C around the 4th loop of PR stress test. This is with stock fan profile. So far really happy with the replacement thermal paste
post edited by eg1122 - 2020/12/14 14:19:27

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#247
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:30:06 (permalink)
eg1122
So I swapped out the thermal paste....O....M...G..... What a difference. PR Score went up a bit on default settings 13595 vs 13533. Max temp was 55C vs 61C.

So running some stress tests with +250 memory and +125 core and power set to 107% and it hits 60C around the 4th loop of PR stress test. This is with stock fan profile. So far really happy with the replacement thermal paste


That is fantastic news! I am trying to get my push/pull test going but work keeps getting in the way :P.

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#248
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:32:13 (permalink)
Oh and this is an exhaust push-pull so I imagine an intake push-pull to be that much better. I'm almost tempted to flip the fans, but just finished putting it all back together.

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#249
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:43:38 (permalink)
eg1122
Oh and this is an exhaust push-pull so I imagine an intake push-pull to be that much better. I'm almost tempted to flip the fans, but just finished putting it all back together.

I debated between the two for a long time, the gfx card uses way more power then any most CPUs and thus is dumping hot air into the case for my CPU AIO to pull up thus reducing cooling. But on the flip side it gets the coolest air from outside and thus prob has the lowest possible temps. I ended up going with the intake just to give the gfx card the best possible cooling even if CPU might be running a bit hotter. 
 
Let me see what my temps are after port royal stability test.

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#250
EVGA1225
New Member
  • Total Posts : 35
  • Reward points : 0
  • Joined: 2020/12/07 12:05:44
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:49:13 (permalink)
It's just amazing how poorly thermal paste or seating of the heat sink can be on these cards. I've been replacing thermal paste for over a decade already on stock graphics cards and still we see manufacturers making the same mistakes. How did the stock paste look like? Is it a cheap white stuff?
eg1122
So I swapped out the thermal paste....O....M...G..... What a difference. PR Score went up a bit on default settings 13595 vs 13533. Max temp was 55C vs 61C.

So running some stress tests with +250 memory and +125 core and power set to 107% and it hits 60C around the 4th loop of PR stress test. This is with stock fan profile. So far really happy with the replacement thermal paste




#251
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:50:06 (permalink)
Well I have two more intake fans at the bottom bringing in cool air so I'm sure that helps.

https://photos.app.goo.gl/yZ7XrkHGDdZNjGHG9

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#252
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 14:53:01 (permalink)
First thank you for the suggestion to swap out the thermal paste. The stock paste was very dry and hard. A very light gray color. Right now I'm running a PR stress test and highest temp I've seen is 64C. But it usually sits around 62C. This is with a +250 memory, +125 core, power set to 107% and stock fan profile. Got a 99.3% pass score.

EVGA1225
It's just amazing how poorly thermal paste or seating of the heat sink can be on these cards. I've been replacing thermal paste for over a decade already on stock graphics cards and still we see manufacturers making the same mistakes. How did the stock paste look like? Is it a cheap white stuff?
eg1122
So I swapped out the thermal paste....O....M...G..... What a difference. PR Score went up a bit on default settings 13595 vs 13533. Max temp was 55C vs 61C.

So running some stress tests with +250 memory and +125 core and power set to 107% and it hits 60C around the 4th loop of PR stress test. This is with stock fan profile. So far really happy with the replacement thermal paste




post edited by eg1122 - 2020/12/14 15:33:58

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#253
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 15:39:16 (permalink)
Ok so I played Division 2 with +250 memory, +125 core, power @107%, fans at default speed and max temp I saw was 64C. Gpu clock was steady at 2050Mhz sometimes hitting 2085Mhz. For reference before the thermal paste replacement I was getting an average temp of 65C and max of 69-70C and barely hitting 1950Mhz during game with stock settings and with a much more aggressive fan curve.

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#254
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 15:46:26 (permalink)
I am running PR stress test now, looks like my max temp is
GPU1: 55C
PWR4 and GPU2 are at 68C
Mem1 is 65C
Mem2:63C
Mem3: 60C
PWR1/2/3 58-60C across them
PWR5: 51C
Ambient: 21.1C

Core+100, Mem+200

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#255
turen009
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2020/12/01 22:35:01
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 15:50:08 (permalink)
What is the difference between hydro and hybrids?
#256
bmgjet
iCX Member
  • Total Posts : 289
  • Reward points : 0
  • Joined: 2015/06/26 06:14:07
  • Status: offline
  • Ribbons : 9
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 15:55:39 (permalink)
turen009
What is the difference between hydro and hybrids?


Hydro all the parts are watercooled since its a custom waterblock.
hybrids just have a AIO slapped to them which cools just the core. Rest of the card is still air cooled.
#257
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 16:02:06 (permalink)
Mathieas
I am running PR stress test now, looks like my max temp is
GPU1: 55C
PWR4 and GPU2 are at 68C
Mem1 is 65C
Mem2:63C
Mem3: 60C
PWR1/2/3 58-60C across them
PWR5: 51C
Ambient: 21.1C

Core+100, Mem+200

So my ambient is 23C so that makes a bit of difference, then on top of that I have it set to exhaust so that adds a bit more heat to the equation. So I think that I'm doing well @64C. Im sure I could get better temps if I had it set to intake but I really dont want all that heat blowing into my case. So i think I found my daily at +250 memory and +125 core. This thread has been really helpful.
post edited by eg1122 - 2020/12/14 16:04:19

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#258
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 16:04:01 (permalink)
eg1122
Mathieas
I am running PR stress test now, looks like my max temp is
GPU1: 55C
PWR4 and GPU2 are at 68C
Mem1 is 65C
Mem2:63C
Mem3: 60C
PWR1/2/3 58-60C across them
PWR5: 51C
Ambient: 21.1C

Core+100, Mem+200

So my ambient is 23C so that makes a bit of difference, then on top of that I have it set to exhaust so that adds a bit more heat to the equation. So I think that I'm doing well @64C. Im sure I could get better temps if I had it set to intake but I really dont want all that heat blowing into my case.


Yup, sounds about right to me also. Thermal paste did wonders for you :-D.

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#259
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 16:05:38 (permalink)
Here is my stability run: https://www.3dmark.com/3dm/54875521

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#260
eg1122
iCX Member
  • Total Posts : 307
  • Reward points : 0
  • Joined: 2020/04/23 00:05:27
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 17:16:39 (permalink)
mine with a 25C ambient
 
https://www.3dmark.com/3dm/54877770

CPU: Intel i9-11900K
Cooling: Corsair iCue H150i RGB Pro XT
Fans: 6x Corsair LL120, 4x Corsair ML120 RGB (Capellix), 4x Corsair ML120 Pro RGB
Mother Board: MSI MEG Z590 Ace
GPU: EVGA RTX 3090 FTW3 Ultra Hybrid
RAM: 4x 8GB CORSAIR Vengeance @XMP 3600mhz
SSDs(NVME): 1x WD Black SN850 1TB, 1x WD Black SN750 1TB, 1x WD Blue SN550 2TB
Sound: Creative Sound Blaster X3
Case: Corsair Crystal Series 680x
PSU: EVGA SuperNOVA 1000W G2
Monitor: Asus Strix XG32VQ (144hz)
Keyboard: Corsair K100 - Cherry MX
Mouse: Logitech MX Master
OS: Windows 10 pro 64bit
#261
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/14 22:35:02 (permalink)
Here are my temps playing Shadow of a Tomb Raider now with Push/Pull.
https://ibb.co/sFRFVbZ
 
 
On another note, does anyone here happen to have this game? If yes, do your cloth flags and foliage jitter like the physics are on over drive? Here is an example that someone else made of the issue. https://youtu.be/m8b14P3aJEg
 
 
 

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#262
QingFengX
Superclocked Member
  • Total Posts : 108
  • Reward points : 0
  • Joined: 2020/12/05 10:10:51
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/15 03:54:52 (permalink)
i want one
#263
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/15 07:37:37 (permalink)
I am now working on my VRM fan curve. When I dropped my GPU temps it cause the VRM fan to spin slower(it's speed is based on GPU temp for some reason) which in turn increased VRM temps. An interesting side effect of a cooler GPU. I wonder if air-cooled cards are on a similar curve as the Hybrid for vrm based on GPU temp. 

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#264
skier23
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2020/12/15 06:21:50
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/15 08:03:26 (permalink)
That looks really good ;)
#265
pellaaa
Superclocked Member
  • Total Posts : 168
  • Reward points : 0
  • Joined: 2020/11/21 19:26:52
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/15 08:41:03 (permalink)
to 3090 ftw3 hybrid owners... have you updated the BIOS? is it safe to do? also with last precision version?
#266
gian1983
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/09/18 05:31:56
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/15 08:41:52 (permalink)
anyone with kingpin to see how fast it is ? 
#267
ctn2mb
New Member
  • Total Posts : 99
  • Reward points : 0
  • Joined: 2020/12/16 11:27:14
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/16 15:00:41 (permalink)
temps seem pretty high for a hybrid setup
#268
Mathieas
SSC Member
  • Total Posts : 585
  • Reward points : 0
  • Joined: 2009/03/28 23:11:56
  • Status: offline
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/16 21:32:39 (permalink)
ctn2mb
temps seem pretty high for a hybrid setup



The Hybrids are quite a bit cooler then the air cooled counterparts. 400 to 450W is alot of power/heat to disapate! My Titan Xp hybrid with a single 120mm rad ran much cooler then the 3090.

CPU: AMD Ryzen 5 5800x3D - Fclk@1800mhz
Cooling: EKWB 360 AIO
Mother Board: X570 Asus Crosshair VIII Formula
GPU: 1x 4090 MSI SUPRIM Liquid X
RAM: 2x 16GB G.Skill Trident Z Neo @3600mhz CL14 (B-Die) 
SSDs(NVME): 1X WD sn850x 4TB,
SSDs(SATA): 1X Samsung 870 EVO 2TB, 1x Samsung 850 Pro 512GB, 1x Samsung 840 Pro 256GB
Sound: Creative Sound Blaster ZXR
Case: Phantek P600S
PSU: EVGA SuperNOVA 1000W T2
Monitor(Main): Alienware AW3423DW (175hz QD-Oled)
Monitor(2ndary): Asus VG259QR (165hz IPS)
OS: Windows 10 pro 64bit
#269
2ndAmendment
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2020/09/17 08:39:31
  • Status: offline
  • Ribbons : 0
Re: 3090FTW3 Hybrid Port Royal Results 2020/12/17 07:03:01 (permalink)
Installed the hybrid kit on my 3090 FTW3 Ultra yesterday (stock OC bios).
 
Best PR score on air: 14,278
 
Best PR score with the hybrid kit so far: 14,563
 
Right out of the box, without any adjustments or fine tuning, my PR score went up almost 200 points to 14,447.  Is there a performance increase from installing the hybrid kit?  Yes, but it's really only in benchmarks and will not be noticeable in games.
 
Why choose the hybrid route then?  The stock air cooler is pretty effective, especially when undervolting, but it is loud.  I'm not overly concerned with fan noise, but the stock cooler is very noticeable when the fans ramp up.  More importantly, the hybrid kit allows for setting up the radiator to exhaust hot air out of the system.  The 3090 puts out a lot of heat, and venting the majority of that heat directly out of my case is why I wanted a hybrid.  I've had very limited time post upgrade, but I'm very please so far.  YMMV.
#270
Page: << < ..678910.. > >> Showing page 9 of 11
Jump to:
  • Back to Mobile