Ciddharthas
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/17 07:58:09
- Location: Boulder, CO, USA
- Status: offline
- Ribbons : 1
Just wondering what people's experience of this version and the firmware that comes with it are.
CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler MB: MSI Z490 Meg Ace RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz GPU: 3080 Ti FTW3 Ultra Hybrid Power Supply: Corsair HX1000i (1000 Watts) Primary Monitor: LG CX48 (4k OLED) Keyboard: Corsair K95 Platinum RGB Mouse: Corsair Scimitar Elite RGB Headset: Arctis Pro Wireless Mic: Elgato Wave 3 VR: Occulus Quest 2
|
sammaza421
New Member
- Total Posts : 65
- Reward points : 0
- Joined: 2017/07/19 20:35:50
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/09 11:17:17
(permalink)
It is a slight improvement in that at least Fan4 has activity now in default mode. We are still awaiting a fix for Fan4 curve and Fan3 % reporting to PX1.
|
koitsu
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2006/04/01 06:12:49
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/09 13:10:04
(permalink)
1.1.9.0 and 1.1.8.0 both crash on start for some of us. I'd link the thread but for some reason the forum is silently deleting links, even to itself.
Rolling back to 1.1.7.0 works fine. Just something to keep in mind if you experience it.
|
chumop
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2021/03/03 10:46:02
- Status: offline
- Ribbons : 2
Re: v 1.1.9 yay or nay?
2021/04/09 13:30:55
(permalink)
koitsu
1.1.9.0 and 1.1.8.0 both crash on start for some of us. I'd link the thread but for some reason the forum is silently deleting links, even to itself.
Rolling back to 1.1.7.0 works fine. Just something to keep in mind if you experience it.
What crash? How so? Is it related to the "not being able to find nvml.dll?"
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: v 1.1.9 yay or nay?
2021/04/09 14:29:52
(permalink)
koitsu
1.1.9.0 and 1.1.8.0 both crash on start for some of us. I'd link the thread but for some reason the forum is silently deleting links, even to itself.
Rolling back to 1.1.7.0 works fine. Just something to keep in mind if you experience it.
30 posts are Required to embed a link in a post see Ultimate Self-Starter Thread For New Members Threads over 30 days old are not shown by default .... change the "time range" at bottom of the page of a forum section from "30 days" (see link above) 
Attached Image(s)
|
koitsu
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2006/04/01 06:12:49
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/09 18:24:40
(permalink)
chumop
What crash? How so? Is it related to the "not being able to find nvml.dll?"
See thread titled "Can't open X1 V1.1.8. Crashes upon launch."
|
dl_unlimited
New Member
- Total Posts : 14
- Reward points : 0
- Joined: 2009/07/15 05:06:33
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/12 20:27:37
(permalink)
No issues with 3070 here. Looking good all round, fixed my RGB not saving properly and randomly reverting to rainbows. Just remember your OC profiles as they got deleted which isnt a big issue for me just something to be aware of.
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: v 1.1.9 yay or nay?
2021/04/12 20:51:10
(permalink)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A   
|
BIGGZxoxo
Superclocked Member
- Total Posts : 131
- Reward points : 0
- Joined: 2016/09/04 17:58:27
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/13 10:11:56
(permalink)
1.1.9.0 wasn't enabling ReBAR for me even when I had all the settings on enabled and disabled. Had to revert back to 1.1.8.0. I am using a 3090 KingPin
i9-11900k, EVGA Z590 Dark, G.Skill Ripjaws V 32GB DDR4-4000 14-15-15-35-1.55V Gear Mode Auto, WD Black SN850 500GB M.2 Gen 4x4 NVMe(OS Drive), Intel 660p 2TB NVMe (Program Drive), EVGA 3090 K|NGP|N Hybrid, EVGA Nu Audio Pro 7.1 Surround Card, EVGA SuperNOVA 1600 T2, LIAN Li O11D XL, LIAN Li UNI Fan AL120, LIAN Li Galahad AIO, EVGA Z20 RGB Optical Mechanical Gaming Keyboard, EVGA X20 Gaming Mouse, Audio-Technica ATH-MSR7b Headphones, LG 27GN950 Monitor, LG CX48 TV
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: v 1.1.9 yay or nay?
2021/04/13 16:09:21
(permalink)
No problems so far on my end, however I use it in a limited way really.
My ReBar support still shows green across the board.
Little surprised they did not post a new update thread referencing the changes for this version especially as this one updated firmware also.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Ciddharthas
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/17 07:58:09
- Location: Boulder, CO, USA
- Status: offline
- Ribbons : 1
Re: v 1.1.9 yay or nay?
2021/04/13 20:04:03
(permalink)
d.burnette
No problems so far on my end, however I use it in a limited way really.
My ReBar support still shows green across the board.
Little surprised they did not post a new update thread referencing the changes for this version especially as this one updated firmware also.
Yeah if a mod hadn't chimed in on this thread yesterday, I'd be wondering if anyone was monitoring this forum, since there was a sticky for version 1.1.7 but not 1.1.8 nor 1.1.9. That seems strange.
CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler MB: MSI Z490 Meg Ace RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz GPU: 3080 Ti FTW3 Ultra Hybrid Power Supply: Corsair HX1000i (1000 Watts) Primary Monitor: LG CX48 (4k OLED) Keyboard: Corsair K95 Platinum RGB Mouse: Corsair Scimitar Elite RGB Headset: Arctis Pro Wireless Mic: Elgato Wave 3 VR: Occulus Quest 2
|
NI_Erof
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2021/04/28 09:30:27
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/28 11:33:50
(permalink)
|
Velcade
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2019/01/31 12:19:05
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/28 11:54:39
(permalink)
1.1.9 is working well. No experience with the firmware that comes with it but it's doing a much better job of remembering my OC and applying it at boot.
Fractal Design Define R6 || 8700K @ 5.0Ghz || Celsius S36 || Maximus X Hero || Trident Z 32GB @ 3200MHz || EVGA RTX 2080ti FTW3 hybrid || Inland NVME 2TB || WD Gold 4GB || PRIME Ultra Titanium 850w || ASUS PG279Q x2
|
Ciddharthas
iCX Member
- Total Posts : 465
- Reward points : 0
- Joined: 2020/09/17 07:58:09
- Location: Boulder, CO, USA
- Status: offline
- Ribbons : 1
Re: v 1.1.9 yay or nay?
2021/04/30 09:08:40
(permalink)
Velcade
1.1.9 is working well. No experience with the firmware that comes with it but it's doing a much better job of remembering my OC and applying it at boot.
I thought a given version of X1 won't even let you use the software without first running the firmware update that comes with it? While I'm glad 1.1.9 is working ok for some of you guys, I'm surprised that a) the latest sticky on this forum is for version 1.1.7, and b) version 1.1.10 or 1.2 hasn't been released yet given the number of major problems many people are having with 1.1.9. I've kind of given up on PX1 for now and am just using afterburner until they clean up X1.
CPU: i7 10700k @ 5.0 GHz with 360mm Corsair H150i Elite LCD cooler MB: MSI Z490 Meg Ace RAM: 64gb Corsair Dominator Platinum RGB @ 3466 MHz GPU: 3080 Ti FTW3 Ultra Hybrid Power Supply: Corsair HX1000i (1000 Watts) Primary Monitor: LG CX48 (4k OLED) Keyboard: Corsair K95 Platinum RGB Mouse: Corsair Scimitar Elite RGB Headset: Arctis Pro Wireless Mic: Elgato Wave 3 VR: Occulus Quest 2
|
Velcade
New Member
- Total Posts : 30
- Reward points : 0
- Joined: 2019/01/31 12:19:05
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/04/30 09:34:30
(permalink)
Ciddharthas
Velcade
1.1.9 is working well. No experience with the firmware that comes with it but it's doing a much better job of remembering my OC and applying it at boot.
I thought a given version of X1 won't even let you use the software without first running the firmware update that comes with it?
That might be true for 3000 series cards, but it didn't mention firmware when I loaded it. Precision is very hit or miss. My last stable version was 1.1.4
Fractal Design Define R6 || 8700K @ 5.0Ghz || Celsius S36 || Maximus X Hero || Trident Z 32GB @ 3200MHz || EVGA RTX 2080ti FTW3 hybrid || Inland NVME 2TB || WD Gold 4GB || PRIME Ultra Titanium 850w || ASUS PG279Q x2
|
Sahira
Superclocked Member
- Total Posts : 161
- Reward points : 0
- Joined: 2021/04/28 05:27:52
- Status: offline
- Ribbons : 0
Flagged as Spam (1)
Re: v 1.1.9 yay or nay?
2021/05/02 00:15:19
(permalink)
|
boxymouse14
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2021/05/06 12:45:16
- Status: offline
- Ribbons : 0
Flagged as Spam (1)
Re: v 1.1.9 yay or nay?
2021/05/06 12:56:48
(permalink)
|
SleepyEs
Superclocked Member
- Total Posts : 101
- Reward points : 0
- Joined: 2021/05/01 06:03:49
- Status: offline
- Ribbons : 0
Re: v 1.1.9 yay or nay?
2021/05/09 15:28:25
(permalink)
|