https://www.techpowerup.com/322865/zalman-rolls-out-p50-ds-pillarless-edge-mid-tower-supports-btf-and-project-zero ZALMAN rolled out the P50 DS, a feature-packed mid-tower case that supports motherboards with reverse-side connectors, from the ASUS BTF and MSI Project Zero ecosystems. The case comes in black and white color variants. Its two most striking design aspects are the pillarless front-left corner, which gives you a panoramic view of your build; and a small programmable display that plugs into a USB 2.0 header, and gets the included software to read out temperature or fan-speed monitoring from ACPI. The case features a conventional horizontally partitioned layout.
The upper compartment with the motherboard tray offers room for graphics cards up to 43.5 cm in length, and CPU coolers up to 17.8 cm in height. The three 120 mm fan vents along the motherboard tray are recessed, so they don't impede long graphics cards. With three 120 mm fans included and in place, the setup is flush with the rest of the motherboard tray, so adding a typical 360 mm radiator would barely come in the way of a graphics card. The motherboard tray has cutouts positioned for compatibility with ASUS BTF and MSI Project Zero motherboards with connectors on the reverse side of the PCB. Besides the three side-facing vents, you get a 140 mm rear exhaust, three and three 120 mm top exhausts. Four 120 mm ARGB-illuminated fans come included with the case. There are two 3.5-inch drive bays in the lower compartment, and a couple of additional 2.5-inch mounts. Front panel connectivity includes a USB3 type-C, two USB 3.2 type-A, and HDA jacks. The case measures 240 mm x 480 mm x 512 mm (WxDxH), weighing 10.5 kg. The company didn't reveal pricing.
An interesting case with the ability to accept reverse cable motherboards.
