veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
I keep getting this when turning my computer on from a cold boot. The weird issue is it doesn't do it all the time, and nothing shows changed in the bios at all. The cpu is a 12900k, running stock Memory is Corsair Dominator 5600Mhz 3x Mechanical drives in raid 0 1x 1tb WD Black gen4 NVME
post edited by veridiux - 2022/09/10 07:02:58
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/10 07:17:59
(permalink)
Could you try changing the CMOS battery when you have a moment and then see if the issue continues?
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/10 08:38:45
(permalink)
the_Scarlet_one
Could you try changing the CMOS battery when you have a moment and then see if the issue continues?
I can absolutely try that. Will probably be a day or so. I live in the middle of no-where and I'll have to order one.
|
uplink_svk
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2010/07/29 03:59:51
- Status: offline
- Ribbons : 3
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/10 09:01:52
(permalink)
☄ Helpfulby Cool GTX 2022/09/14 11:56:28
It's a recurring bug, AFAiK everyone of us here who own either Classy or KP has it.
TBT, I haven't seen it for days now, I'm running bios 1.14.
mobo: EVGA Z690 DARK K|NGP|N, 121-AL-E699-KR | bios: 1.14 | cpu: Intel® Core™ i9-12900T Processor | vga: Nvidia GeForce RTX™ 3090 Ti Founders Edition | ram: DOMINATOR® PLATINUM RGB 32GB (2x16GB) DDR5 DRAM 6600MHz C32 Memory Kit — Black [SKU CMT32GX5M2X6600C32] | nvme ssd: Samsung 980 PRO NVMe™ M.2 SSD 1 TB & Samsung 980 PRO NVMe™ M.2 SSD 2 TB | psu: Asus ROG THOR 1000P2 GAMING cooler: Asus ROG RYUJIN II 360 | monitor #1: 31.5'' 4K OLED Display with Pixel Dimming and 1M : 1 Contrast Ratio [32EP950-B] | monitor #2: LG Ergo 27UN880 | mouse: Logitech Master 3S | keyboard: Logitech MX Mechanical + MX Palm Rest
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/10 09:13:46
(permalink)
uplink_svk
It's a recurring bug, AFAiK everyone of us here who own either Classy or KP has it.
TBT, I haven't seen it for days now, I'm running bios 1.14.
Oh you have this issue as well? I was using the 1.10 and had the issue, then was on 1.12 I think, then 1.14, and now 1.15. I've had it on every bios revision so far.
|
uplink_svk
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2010/07/29 03:59:51
- Status: offline
- Ribbons : 3
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/10 09:23:07
(permalink)
veridiuxOh you have this issue as well? I was using the 1.10 and had the issue, then was on 1.12 I think, then 1.14, and now 1.15. I've had it on every bios revision so far. Yes, and I've even had a topic regarding this issue and can't find it anymore  Here's another guy with same issue. The only thing I did was uninstalling E-leet X1, because it was causing my CPU to coil whine. And since then I have no message of this type when cold booting.
mobo: EVGA Z690 DARK K|NGP|N, 121-AL-E699-KR | bios: 1.14 | cpu: Intel® Core™ i9-12900T Processor | vga: Nvidia GeForce RTX™ 3090 Ti Founders Edition | ram: DOMINATOR® PLATINUM RGB 32GB (2x16GB) DDR5 DRAM 6600MHz C32 Memory Kit — Black [SKU CMT32GX5M2X6600C32] | nvme ssd: Samsung 980 PRO NVMe™ M.2 SSD 1 TB & Samsung 980 PRO NVMe™ M.2 SSD 2 TB | psu: Asus ROG THOR 1000P2 GAMING cooler: Asus ROG RYUJIN II 360 | monitor #1: 31.5'' 4K OLED Display with Pixel Dimming and 1M : 1 Contrast Ratio [32EP950-B] | monitor #2: LG Ergo 27UN880 | mouse: Logitech Master 3S | keyboard: Logitech MX Mechanical + MX Palm Rest
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/11 12:34:53
(permalink)
the_Scarlet_one
Could you try changing the CMOS battery when you have a moment and then see if the issue continues?
First, I would just like to say having to remove the motherboard from the case to replace the battery was a pain.. lol However, a new battery did not seem to solve the problem.
|
Mienko
Superclocked Member
- Total Posts : 170
- Reward points : 0
- Joined: 2007/11/28 19:45:09
- Status: offline
- Ribbons : 3
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/11 20:09:43
(permalink)
I've only ever had that on my Classy when either the CPU or mem (usually the mem) were running even slightly unstable.
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 07:16:59
(permalink)
Mienko
I've only ever had that on my Classy when either the CPU or mem (usually the mem) were running even slightly unstable.
I've got everything running stock without xmp activated and it's still doing it. I tried to search it, but is there any official update on this issue? Since it's multiple people.
post edited by veridiux - 2022/09/14 07:27:53
|
Mienko
Superclocked Member
- Total Posts : 170
- Reward points : 0
- Joined: 2007/11/28 19:45:09
- Status: offline
- Ribbons : 3
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 11:02:10
(permalink)
"Memory is Corsair Dominator 5600Mhz"
How many sticks?
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 11:06:10
(permalink)
Mienko
"Memory is Corsair Dominator 5600Mhz"
How many sticks?
I have two 16gb sticks
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 11:10:36
(permalink)
☼ Best Answerby veridiux 2022/09/22 18:37:10
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 11:14:30
(permalink)
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
oh really? I also run hwinfo on startup. I'll disable it and see if that fixes it. Thanks a ton
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31001
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 12:07:00
(permalink)
 As far as possible conflicts go - Do not have Any software open on Boot. Then add one at a time & see if issue still happens What software do you run in the background?
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2366
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 39
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 12:12:52
(permalink)
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
I am quite confused how hwinfo running in at boot of Windows would cause a "memory has changed" message on the next boot-up before the system even tries to load Windows.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 32GB DDR5-6000 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 13:06:58
(permalink)
B0baganoosh
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
I am quite confused how hwinfo running in at boot of Windows would cause a "memory has changed" message on the next boot-up before the system even tries to load Windows.
+1
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 13:23:10
(permalink)
B0baganoosh
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
I am quite confused how hwinfo running in at boot of Windows would cause a "memory has changed" message on the next boot-up before the system even tries to load Windows.
It seems like anything that checks memory config can have serious issues with this board. Having hwinfo up while 3dmark was pulling system info or the pulling up the spd tab on cpuz would cause hard locks and reboot. But I was getting memory has changed at least 75% of the time and after not running hwinfo at startup (thus not running hwinfo as often) I haven't gotten the message a single time since.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2366
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 39
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/14 13:39:35
(permalink)
tresnugget
...Having hwinfo up while 3dmark was pulling system info or the pulling up the spd tab on cpuz would cause hard locks and reboot...
This I understand. I don't like it, but I had that too and I understand that problem. tresnugget
... after not running hwinfo at startup (thus not running hwinfo as often) I haven't gotten the message a single time since.
This I do not understand. EVGA, please explain.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 32GB DDR5-6000 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/16 19:20:02
(permalink)
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/22 18:37:49
(permalink)
☄ Helpfulby Cool GTX 2023/03/22 11:22:12
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
Man.. I don't get it, but I removed it from startup and haven't had a single message since.
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/22 19:25:20
(permalink)
veridiux
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
Man.. I don't get it, but I removed it from startup and haven't had a single message since.
Yeah, same. Even the few times I've opened hwinfo since removing it from startup I haven't had a single message. It's been weeks and before I was getting it nearly every boot.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/23 04:26:07
(permalink)
tresnugget
veridiux
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
Man.. I don't get it, but I removed it from startup and haven't had a single message since.
Yeah, same. Even the few times I've opened hwinfo since removing it from startup I haven't had a single message. It's been weeks and before I was getting it nearly every boot.
yeah, it's absolutely crazy. I would have never thought that would fix it... lol
|
Bee_Dee_3_Dee
SSC Member
- Total Posts : 598
- Reward points : 0
- Joined: 2004/11/20 02:40:52
- Status: offline
- Ribbons : 23
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/23 14:53:16
(permalink)
veridiux
tresnugget
veridiux
tresnugget
I was never getting CPU has changed messages but I was getting memory has changed almost every reboot. Turned out pulling up hwinfo or having it open on boot was causing it. Stopped it from opening on boot and I almost never get it any more.
Man.. I don't get it, but I removed it from startup and haven't had a single message since.
Yeah, same. Even the few times I've opened hwinfo since removing it from startup I haven't had a single message. It's been weeks and before I was getting it nearly every boot.
yeah, it's absolutely crazy. I would have never thought that would fix it... lol
i've never had the memory change problem running HWiNFO64 at startup. i'm still doing wat zippytek (ty again!  ) said, "CPU-Z's .ini setting SPD=0" But most importantly i wanted to mention i only have the following (that might be related) starting with windows: 1. HWiNFO64 2. Afterburner (only for bench-marking Games.) v4.6.4.16255 3. Riva Tuner Statistics Server v7.3.3.26004 Edit: 4. EVGA Flow Control 2.1.00
post edited by Bee_Dee_3_Dee - 2022/09/23 14:56:46
> PSU: Seasonic VERTEX GX-1200> Mainboard: EVGA Z690 CLASSIFIED (BIOS v1.03 12/3/2021)> CPU: Intel Core i9-12900KF> AIO: EVGA CLC 240mm> Physical Memory: G.SKILL Trident Z5 32GB (2 x 16GB) DDR5 5600> Physical Memory Model#: F5-5600U3636C16GX2-TZ5S> Monitor: Alienware AW2721D> Video Card: EVGA 3090 FTW3 ULTRA GAMING> Case: Cooler Master HAF X (942)> DAS: Sabrent DS-SC5B
|
dreamyeric
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2022/09/05 13:44:24
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/25 13:24:01
(permalink)
Mind if I ask how you set up your RAID? Were you able to install the RST? Are you having your OS installed on the SSD or the RAID0 HDDs?
I'm having trouble installing the RST. If I use VMD to build the RAID and install the win 10 on the SSD, the SSD won't be seen during the bootup.
> PSU: EVGA SuperNOVA 750 P5> Mainboard: EVGA Z690 CLASSIFIED (BIOS v1.14)> CPU: Intel Core i7-12700K> Physical Memory: CORSAIR - VENGEANCE 32GB (2 x 16GB) DDR5 5600> Physical Memory Model#: CMK32GX5M2B5600C36> Video Card: EVGA GeForce RTX 2060 12GB XC GAMING> Case: Cooler Master NR600P> OS Storage: Samsung 970 EVO Plus NVMe M.2 1TB> OS: Windows 10 pro
|
veridiux
New Member
- Total Posts : 57
- Reward points : 0
- Joined: 2010/08/19 00:52:58
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/25 14:39:04
(permalink)
☄ Helpfulby Cool GTX 2023/03/22 11:23:19
dreamyeric
Mind if I ask how you set up your RAID? Were you able to install the RST? Are you having your OS installed on the SSD or the RAID0 HDDs?
I'm having trouble installing the RST. If I use VMD to build the RAID and install the win 10 on the SSD, the SSD won't be seen during the bootup.
When you go to install windows with raid you have to install the vmd raid driver on the screen where you select your hard drive. Luckily the USB drive that came with your motherboard has it already so you just have to select the right device and folder when installing you click the "have disk" option. Ill be home in an couple hours and can try to give more detailed instructions, but I cannot remember the folder or menu layout. Also, I have the OS setup on a nvme and three mechanical drives in raid0 for games.
post edited by veridiux - 2022/09/25 14:42:56
|
dreamyeric
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2022/09/05 13:44:24
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2022/09/25 19:34:19
(permalink)
Yep, I've been reading some other websites. It seems like I will have to reinstall win 10 with VMD at the first beginning if I want to have RAID1 for Data and NVME for OS. Thank you.
post edited by dreamyeric - 2022/09/25 19:35:43
> PSU: EVGA SuperNOVA 750 P5> Mainboard: EVGA Z690 CLASSIFIED (BIOS v1.14)> CPU: Intel Core i7-12700K> Physical Memory: CORSAIR - VENGEANCE 32GB (2 x 16GB) DDR5 5600> Physical Memory Model#: CMK32GX5M2B5600C36> Video Card: EVGA GeForce RTX 2060 12GB XC GAMING> Case: Cooler Master NR600P> OS Storage: Samsung 970 EVO Plus NVMe M.2 1TB> OS: Windows 10 pro
|
CCIDgfx
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2014/09/10 13:46:26
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/02/18 13:58:11
(permalink)
None of these issues apply to me and I still get memory error anytime I restart or CPU+VMD errors if I shut down and restart. I'm running everything at stock. 12900K, no OC of any kind. Can't even run all 4 sticks or Corsair DDR5 2500 at full speed without issues. GOing to try a fresh install of Windows but I doubt that's the issue. The only reason I went with this board was because of the price and I needed something that would leave space between 2 4090 FE cards that didn't cost a fortune. I have the Asus Z690 Maximus Hero running a 12900K with same ram and 2 3090 Hybrids with no issues.
EVGA Z690 CLASSIFIED | Intel I9 12900K | 128gb Corsair Vengeance 5200mhz | 2X Nvidia 4090 FE | EVGA 1600 P+
|
pearhead
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2008/04/04 18:34:51
- Location: Cerro Gordo, IL.
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/02/24 03:55:18
(permalink)
Hey all, Just chiming in. New build for me just got it up and going a cpl weeks ago. Having the same issue as original poster. Restarting my system works fine, reg post beeps and all is good. A cold reboot I get 5 "bad beeps" before it boots and sometimes it goes to the Mem and CPU has changed would u like to enter setup screen. When entering set up, Nothing's changed. It's not like my CMOS battery isn't working as the settings are still saved. Also, noticed that it pauses on POST CODE D6 when doing this. Thanks for any help in advance :) Z690 Dark 13900k G.Skill Ripjaws S5 Series 64gb (2x32gb) DDR5 5200 F5-5200J3636D32GX2-RS5K EVGA 1200 P2 PSU MSI 4080 Ventus 3x OC
post edited by pearhead - 2023/02/24 03:59:54
|
pearhead
New Member
- Total Posts : 31
- Reward points : 0
- Joined: 2008/04/04 18:34:51
- Location: Cerro Gordo, IL.
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/02/24 04:16:08
(permalink)
Sorry for the double posts but I think I found my issue. Looked up that D6 code and it was "No Console Output Devices are found" My video cards #1 port is HDMI and most of the time I cannot get into BIOS unless on the HDMI port. If I plug in my DP cable and unplug the HDMI cable I get the D6 and the BAD Post BEEPS from a cold boot... Stupid MSI video card... Sure do miss you EVGA!!! I guess i fixed my issues...
Thanks,
Pearhead
|
slickwicked616
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2014/12/28 21:33:24
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/02/24 21:44:56
(permalink)
veridiux
I keep getting this when turning my computer on from a cold boot. The weird issue is it doesn't do it all the time, and nothing shows changed in the bios at all.
The cpu is a 12900k, running stock
Memory is Corsair Dominator 5600Mhz
3x Mechanical drives in raid 0
1x 1tb WD Black gen4 NVME
i had this issue on my x570 ftw and now on my z690 classy and still have the issue amongst others. im almost at the point of getting another board
|