jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2023/02/25 07:16:47
(permalink)
I replaced my motherboard battery and I thought it was fixed however that's when I discovered it only happens from a cold boot not a restart; VMD, CPU or Memory has changed. It's annoying but I deal with it.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
LukeT32
New Member
- Total Posts : 50
- Reward points : 0
- Joined: 2022/10/21 22:44:00
- Location: Iowa
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/03/08 22:12:30
(permalink)
Not sure if it's the 2.09 BIOS or disable EVGA ELEET and Precision at startup but I no longer get the error message.
13900k on a Z690 Classified w/ 4090 FE
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2023/03/09 08:09:53
(permalink)
☄ Helpfulby Cool GTX 2023/09/27 06:29:42
I disabled Eleet X1 from startup and I no longer have this problem.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 5427
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56
Re: Z690 Classified Memory has changed and CPU has changed.
2023/03/12 10:31:56
(permalink)
☄ Helpfulby Cool GTX 2023/03/22 11:24:25
LukeT32 Not sure if it's the 2.09 BIOS or disable EVGA ELEET and Precision at startup but I no longer get the error message.
I'm still running ELEET and flashed to 2.09 and so far not getting any error messages
|
battleskard
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2015/09/13 16:04:13
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/03/22 07:17:52
(permalink)
Did anyone find a fix? I’m also getting cpu and memory change from startup. I’m on bios 2.10 I believ
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2023/03/22 09:28:27
(permalink)
☄ Helpfulby Cool GTX 2023/03/22 11:24:37
battleskard Did anyone find a fix? I’m also getting cpu and memory change from startup. I’m on bios 2.10 I believ
Yes, Eleet X1 was causing the issue for me. I simply disabled it from starting up with OS. Also other monitoring software like HWiNFO64 etc can cause this issue.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 5427
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56
Re: Z690 Classified Memory has changed and CPU has changed.
2023/04/02 13:13:35
(permalink)
jason9755
battleskard Did anyone find a fix? I’m also getting cpu and memory change from startup. I’m on bios 2.10 I believ
Yes, Eleet X1 was causing the issue for me. I simply disabled it from starting up with OS. Also other monitoring software like HWiNFO64 etc can cause this issue.
I really wish EVGA would spend a few minutes on fixing this, i have never user HW info, only eleet, thought it had gone away but it came back, I'm going to disable eleet and hopefully my RGB stays as is. I have to say I am highly disappointed in this board, I've been using evga MB's since the 780i days and never had any problems until this board, it's got me looking for another MB at this point, this thing is just to buggy. Would be nice to see EVGA chime in on this, they used to have great support and respond to issues quick, now not so much.
|
TheSadClown
Superclocked Member
- Total Posts : 145
- Reward points : 0
- Joined: 2016/03/11 04:09:05
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/04/03 15:56:48
(permalink)
yeah these boards are not worth the price they are selling for. Horrible software support
|
battleskard
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2015/09/13 16:04:13
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/04/05 07:50:32
(permalink)
I also disabled eleet x1 and no longer get the message
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2023/04/05 09:28:55
(permalink)
quadlatte
jason9755
battleskard Did anyone find a fix? I’m also getting cpu and memory change from startup. I’m on bios 2.10 I believ
Yes, Eleet X1 was causing the issue for me. I simply disabled it from starting up with OS. Also other monitoring software like HWiNFO64 etc can cause this issue.
I really wish EVGA would spend a few minutes on fixing this, i have never user HW info, only eleet, thought it had gone away but it came back, I'm going to disable eleet and hopefully my RGB stays as is. I have to say I am highly disappointed in this board, I've been using evga MB's since the 780i days and never had any problems until this board, it's got me looking for another MB at this point, this thing is just to buggy. Would be nice to see EVGA chime in on this, they used to have great support and respond to issues quick, now not so much.
It's a minor inconvenience and there is no need to be overly dramatic. To say it would only take a few mins to fix is dismissive. Eleet X1 could be having issues with BIOS, UEFI, TPM etc. and be overly complicated to fix, who knows and you shouldn't assume as much. To condemn a whole company over a minor bug, bruh...
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
quadlatte
CLASSIFIED ULTRA Member
- Total Posts : 5427
- Reward points : 0
- Joined: 2006/09/14 16:52:58
- Location: Greensboro, NC
- Status: offline
- Ribbons : 56
Re: Z690 Classified Memory has changed and CPU has changed.
2023/04/05 09:45:02
(permalink)
jason9755
quadlatte
jason9755
battleskard Did anyone find a fix? I’m also getting cpu and memory change from startup. I’m on bios 2.10 I believ
Yes, Eleet X1 was causing the issue for me. I simply disabled it from starting up with OS. Also other monitoring software like HWiNFO64 etc can cause this issue.
I really wish EVGA would spend a few minutes on fixing this, i have never user HW info, only eleet, thought it had gone away but it came back, I'm going to disable eleet and hopefully my RGB stays as is. I have to say I am highly disappointed in this board, I've been using evga MB's since the 780i days and never had any problems until this board, it's got me looking for another MB at this point, this thing is just to buggy. Would be nice to see EVGA chime in on this, they used to have great support and respond to issues quick, now not so much.
It's a minor inconvenience and there is no need to be overly dramatic. To say it would only take a few mins to fix is dismissive. Eleet X1 could be having issues with BIOS, UEFI, TPM etc. and be overly complicated to fix, who knows and you shouldn't assume as much. To condemn a whole company over a minor bug, bruh...
Bruh, I've been buying EVGA since the early days of eVGA, and when you pay a premium price for a "premium" product you expect it to work as advertised, if I want to deal with " minor inconvenience" then I would've paid way less, but I didn't. For EVGA to not make a peep about this, and there has been plenty of post about it, is concerning, if it was a one off thing that would be different but I have noticed problems with my keyboards and a PSU. At one time when you bought EVGA branded products you knew it would be problem free, now not so much.
|
israelduran
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2023/03/11 07:31:22
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/09/22 10:35:51
(permalink)
So I've had this board since march, and have also had this issue from day 1, happens multiple times per week and im finally sick of it. Is the consensus that there is no fix? For me in particular it wakes my computer out of sleep to restart in the middle of the night then stays on in bios with the error message saying x y z thing has changed or checksum error. Its specifically annoying for me because I have a bluetooth mouse and keyboard so I have to bust out an ancient wired keyboard to get out of the bios.
|
LukeT32
New Member
- Total Posts : 50
- Reward points : 0
- Joined: 2022/10/21 22:44:00
- Location: Iowa
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/09/22 11:09:37
(permalink)
israelduran So I've had this board since march, and have also had this issue from day 1, happens multiple times per week and im finally sick of it. Is the consensus that there is no fix? For me in particular it wakes my computer out of sleep to restart in the middle of the night then stays on in bios with the error message saying x y z thing has changed or checksum error. Its specifically annoying for me because I have a bluetooth mouse and keyboard so I have to bust out an ancient wired keyboard to get out of the bios.
do you Eleet set to start up?
13900k on a Z690 Classified w/ 4090 FE
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2023/09/22 11:11:01
(permalink)
israelduran So I've had this board since march, and have also had this issue from day 1, happens multiple times per week and im finally sick of it. Is the consensus that there is no fix? For me in particular it wakes my computer out of sleep to restart in the middle of the night then stays on in bios with the error message saying x y z thing has changed or checksum error. Its specifically annoying for me because I have a bluetooth mouse and keyboard so I have to bust out an ancient wired keyboard to get out of the bios.
The consensus is EVGA's Eleet X1 is causing the issue when its set to start up with OS. Also there could be other issues causing your problem; memory compatibility, XMP profile, HWiNFO software enabled to start with OS, Intel extreme tuning utility, or maybe the blue tooth device is triggering a wake-up which conflicts with EVGA bios causing bsod. It's very difficult to determine the cause when you give little info; what is your hardware specs, bios version, OS version etc.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30806
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: online
- Ribbons : 123
Re: Z690 Classified Memory has changed and CPU has changed.
2023/09/27 06:34:43
(permalink)
Another program mentioned by other members, that cause this type of issue: hwinfo64 As far as possible Boot conflicts go - Do not have Any software start on Boot. Then add one program (per re-Boot) at a time & see if issue happens
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Black_Hawx1
New Member
- Total Posts : 66
- Reward points : 0
- Joined: 2016/02/17 23:33:28
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2023/09/28 06:04:18
(permalink)
jason9755 I disabled Eleet X1 from startup and I no longer have this problem.
same, it was driving me crazy to enter the bios every morning
MONITOR: MSI 27" IPS MAG274R2 G-Sync 165Hz 1080PCASE: EVGA DG 77 BLACK -MODDEDMB: EVGA Z690 CLASSIFIED (BIOS 2.12)CPU: i5 12400 5.3 GHZ overclocked via BCLKAIO: Asus ROG Ryuo 120 -MODDEDRAM: 32 Gb ram Corsair DOMINATOR DDR5 5200 MhzSSD NVMe: WD SN850 NVMe 500 Gb 7000 mb/s (+500 x2 SATA3 SSD)GPU: EVGA RTX 3060 12 Gbs XCPSU: EVGA P6 SUPERNOVA 1000W PLATINUM MOUSE: G Pro X SuperlightKEYBOARD: G915
build: https://i.imgur.com/s56ZcCq.jpeg
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/17 18:46:59
(permalink)
Seems all of this has carried forward to the Classified Z790 as well. I mostly get a 50/50 shot of CPU has Changed, Memory has changed, or both together. But I've had these (all at once): > CMOS Checksum Error > Memory has changed > CPU and memory have changed > VMD Control setting has changed > CSM settings has been changed to enable for legacy graphic card I changed the battery like tech support told me to do when I submitted a ticket. That didn't do anything, as I suspected it wouldn't, it's a brand new board. What is super irritating, is apparently this issue goes way back, and they just default to "change the battery" instead of admitting they have a problem across multiple bios, multiple product. They want me to check to see if the board is shorting out on something, but that doesn't make sense, because it doesn't happen on EVERY boot up, like a short would cause it to do. I can't find any info if I'm running HWinfo or not, how do I find that out? > PSU: EVGA Supernova 1000G FTW > Mainboard: EVGA Z790 CLASSIFIED (BIOS v1.11) > CPU: Intel Core i9-13900KF > Physical Memory: CORSAIR Vengeance RGB 64GB (2 x 32GB) 288-Pin PC RAM DDR5 6000 (Running at 5000) > Physical Memory Model#: CMH64GX5M2B6000C40 > Video Card: Nvidia 4080 FE > Case: HYTE H60 > OS Storage: 3 Seagate Firecuda 530's > OS: Windows 11
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/18 10:08:04
(permalink)
Do you have EVGA ELEETE X1 software installed? If so disable it from starting up with OS and any other overclocking software (intel extreme tuning utility for example) from booting with OS.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/18 20:07:55
(permalink)
jason9755 Do you have EVGA ELEETE X1 software installed? If so disable it from starting up with OS and any other overclocking software (intel extreme tuning utility for example) from booting with OS.
Yes, I removed both Eleet X1 and Intel Extreme yesterday. I came home tonight after work and cold booted, no force to bios! yay! Now I need to find an LED controller for my bequiet AIO, because X1 was handling that, and now it's not working correctly.
|
jason9755
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 2017/03/14 00:18:34
- Location: Boston
- Status: offline
- Ribbons : 1
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/18 20:50:37
(permalink)
You can keep Eleete X1 installed just disable start with OS.
PSU: EVGA SuperNOVA 1000 G6MB: EVGA Z690 CLASSIFIED (bios v. 2.12)CPU: Intel Core i9-12900KCPU Cooler: EVGA CLC 360mmMemory: Corsair 32 GB (2 x 16GB) DDR5 6000mhzMonitor: Alienware AW2521H GPU: EVGA 3080 Ti FTW3 ULTRA Case: Corsair 5000D Airflow OS: Windows 11 ProKeyboard: EVGA Z20Mouse: Finalmouse Starlight Poseidon
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84282
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/18 23:57:09
(permalink)
jason9755 You can keep Eleete X1 installed just disable start with OS.
Yes, that should work.
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/19 18:37:00
(permalink)
I've got two cold starts with long spans of time between and no Boot to Bios, so far. However, it STILL takes quite a while to post. I will need to actually time it and show that here, but what is a reasonable time from Power Button to Desktop?
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/19 18:40:07
(permalink)
Interestingly, after going into the bios and just hitting F10 to get to the desktop, I'm getting a "Standard PS/2 Keyboard" showing up in device manager but it's failed to start, so it has the triangle !. Did I mess something up in the bios?
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84282
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 85
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/20 00:43:51
(permalink)
Antix70 Interestingly, after going into the bios and just hitting F10 to get to the desktop, I'm getting a "Standard PS/2 Keyboard" showing up in device manager but it's failed to start, so it has the triangle !. Did I mess something up in the bios?
Possibly you did set something wrong, so go back into the BIOs and if there is a setting for the standard keyboard disable it.
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/20 07:08:26
(permalink)
The boot time from pressing the power button to the point the desktop shows up is 1m:12s My old Gigabyte board was fast, I'd estimate 20-30 seconds. I will check the bios for Keyboard options on my next reboot.
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/20 07:59:40
(permalink)
Double post...
post edited by Antix70 - 2024/01/20 08:01:18
|
ty_ger07
Insert Custom Title Here
- Total Posts : 16561
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 271
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/20 08:21:57
(permalink)
Do you have force memory training enabled? If you retrain your memory every boot, that would account for some of that extra time.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
|
Antix70
New Member
- Total Posts : 12
- Reward points : 0
- Joined: 2020/01/12 08:11:04
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/01/22 23:13:25
(permalink)
ty_ger07 Do you have force memory training enabled? If you retrain your memory every boot, that would account for some of that extra time.
What setting is that?
|
israelduran
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2023/03/11 07:31:22
- Status: offline
- Ribbons : 0
Re: Z690 Classified Memory has changed and CPU has changed.
2024/07/24 11:15:00
(permalink)
Figured I'd come back and update my personal situation with my z690 classy. Disabling Eleet X1 from startup changed the behavior from happening every time the pc was put to sleep to once in a blue moon, however it does still tend to happen where it'll be asleep, and I'll be asleep and I'll wake up to the computer booted at the bios with any variation of messages telling me things that have not been changed have changed. What has not changed and still persists is that I still get any variation of those same messages from a cold boot EVERY TIME. It's pretty weird that despite this seeming to be an issue for everyone that has this board, that no one from EVGA has commented and why this is tolerable on boards 3x the cost of "lower end" boards that just work without issue. I'm considering transitioning to a small form factor build, so any recommendations on boards are welcomed.
|