EVGA

Hot!Project BEHEMOT

Page: 12345.. > >> Showing page 1 of 6
Author
arkjas92
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2021/01/21 03:58:27
  • Status: offline
  • Ribbons : 2
2021/03/09 06:19:15 (permalink)
Hi everyone
 
Long time ago I started work with my Cooler Master Cosmos S 
 
The problem, however, is that it really cramped inside and hard to get to anything.
Especially that I changed to x299 and bought an EVGA X299 DARK motherboard which is big and tall.
 
I really like my COSMOS and I've spent a lot of time with it, but is time to change it for something bigger.
 
I liked Raijintek Eris Evo a lot, but I did not like a few solutions that were used in it.
 
Hoever design of this case is definitely that what I like.
 
I noticed that the ERIS EVO is a simple structure, so nothing prevents me from making my version, especially since I have access to a lot of machines.
 
So I decided... LETS DO THIS!
 
And that how started Project "BEHEMOT"

 
Speciffication of my platform which I am going to use in this project:
 
- EVGA X299 DARK
- i9 9940X (delid + custom IHS)
- 4x8GB DDR4 Patriot Viper Steel 4000 CL19
- Corsair MP300 480 + 960 GB
- GeForce 1080Ti AMP Extreme (for now, rtx 3080/3090 soon)
- Corsair HX1200i
- Arctic P12/P14 PWM PST
 
In new case I am going to use 2x 560 xt45 radiator and... MORA 420... INSIDE! 
 
 
Patriot Vipers doesn't has temp sensor so i decided to do my own and it work perfectly
 

 

 

 

 

 

 

 

 
 
My awesome helper!  
 

 

 

 
 
Overclocked my i9 9940x 
 
14x 4.9 GHz
Mesh 31
Vcore 1.31V
Mesh Voltage: 1.165V
 
Here is the screen with 5.0 Ghz and Mesh 31
 
This is one of the highest score in HW BOT for 14 cores with H2O cooling! 
 
Something is wrong with my r20 because it still shows the same result in the table. I need to reinstal it 
 

 
 
Patriot Viper Steel showed awesome performance! Full stable set! WOW! Max temp 40,5C.
 
Final voltage is 1.485V
 

 

 

 
 
I wait for first components and after that I will designed next of them.
 
I decided that it will be better to order more items singly than all at once because probably half or 3/4 would need to be changed and ordered again If I will take all at once.
 

 

 
 

 
 
Some new parts will come soon  
 

 

 

 

 

 
I changed connection between CPU and GPU and remove Pararell loop. Now CPU temps are 15C lower! 
 

 
 
 

 EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
#1

164 Replies Related Threads

    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 26472
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 119
    Re: Project BEHEMOT 2021/03/09 07:40:53 (permalink)
    Very Nice Photos
     
    Great looking build
     
    Good to see all the OC details
     
    & soon a fully Custom Case

    RTX Project EVGA X99 FTWK 2xEVGA2080Ti EVGA1200P2  Nibbler EVGA X99 Classified 3-GPU Water cooled 1600P2 AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support      I'm a Volunteer Moderator on the EVGA Forums ... Not an EVGA employee

    #2
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 85680
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Belgium
    • Status: offline
    • Ribbons : 75
    Re: Project BEHEMOT 2021/03/09 07:57:57 (permalink)
    A brilliant mod that is cat approved. 

    AMD Ryzen 9 5950X,  Corsair Mp600 Pro M.2 2TB, 128GB DDR4  Crosshair VIII Hero, Asus RX 6900 XT Associate Code: H5U80QBH6BH0AXF

    #3
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/09 08:08:20 (permalink)
    rjohnson11
    A brilliant mod that is cat approved. 




    I was working with COSMOs 5 years, from Z270 to Z370, Z390 and X299 :) 
     

     

     


     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #4
    Chaos_21
    CLASSIFIED Member
    • Total Posts : 4215
    • Reward points : 0
    • Joined: 2005/10/26 17:37:36
    • Location: Redding, Ca
    • Status: offline
    • Ribbons : 9
    Re: Project BEHEMOT 2021/03/09 16:03:25 (permalink)
    Very nice! 

    ASUS TUF Gaming Z490-Intel Core i7-10700K- ASUS ROG Strix LC 240 Cooler-Corsair Vengeance 4 x 16GB 2933mhz-Two 1TB 860 EVO SSD's-500GB 970 Evo plus M.2 SSD--EVGA RTX 2070 SUPER-Corsair RM 750x-Windows 10 64bit-be quiet! 500DX Case      
     Steam     Twitter: https://twitter.com/Chaos_21
     Use My Program Code To Register A Product: LEENW17BUL
    Use my associate code: JBGVM12HDYDJPIM to get 5%-10% discount on EVGA purchases.
     
    #5
    Daviddswenson
    Superclocked Member
    • Total Posts : 160
    • Reward points : 0
    • Joined: 2021/02/23 20:45:38
    • Status: offline
    • Ribbons : 0
    Re: Project BEHEMOT 2021/03/09 16:06:34 (permalink)
    Always love build picks. Looks great, congrats.

    10900K
    EVGA Z590 FTW
    1000W G5
    EK AIO Elite 360
    1TB WD_Black SN750
    Lian Li O11 Dynamic
     
    12G-P5-3968-KR 6/3/2021 8:02:05 AM PT No
    12G-P5-3967-KR 6/3/2021 7:44:09 AM PT Yes
    #6
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/10 01:29:22 (permalink)
    Thanks guys!
     
    Next parts will come at friday or monday and I will be able to assemble most of the case and start preparing the last mounting elements for radiators etc :)

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #7
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/11 04:34:28 (permalink)
    Some Fans :)

    I have 5x P14 so I need 20 more :)

    In finall case I will install inside:

    25x Arctic P14 PWM PST for radiators
    6x Noiseblocker eloop B12-PS for air intake

    Arctic P12/P14 are fantastis fans! I cant undertsand how is it possible that they are so good and so cheap.











    post edited by arkjas92 - 2021/03/11 04:38:07

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #8
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/11 08:40:58 (permalink)
    More pictures and infos soon :)
     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #9
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/11 12:46:13 (permalink)
    OK, some parts came to me today so I can show you the shape and size of the case.
    I'll be working with it tomorrow and over the weekend because I have enough parts to put together the construction.
     

     

     

     

     
     
    My friend made me ATX24, EPs and PCIE cables :) Carbon, grey, carbon gold etc :P 
     

     

     

     
    post edited by arkjas92 - 2021/03/11 12:57:59

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #10
    hotdoghotline
    Superclocked Member
    • Total Posts : 129
    • Reward points : 0
    • Joined: 2020/12/03 09:14:42
    • Status: offline
    • Ribbons : 0
    Re: Project BEHEMOT 2021/03/11 16:51:22 (permalink)
    Man, you are a really talented system builder, can't wait to see what comes next 


    #11
    a213m
    SSC Member
    • Total Posts : 736
    • Reward points : 0
    • Joined: 2006/02/08 11:10:24
    • Location: Canada
    • Status: online
    • Ribbons : 19
    Re: Project BEHEMOT 2021/03/12 00:50:52 (permalink)
    I got the same RAM heatsinks and waterblocks from Bykski and the same custom copper IHS.
    (Yes, I delidded my soldered 10980XE )

    My free and open source DDR4 SPD reader/writer with write protection capabilities
    ~~~
    My rigs:
    #1: 10980XE, R6EE, 8x8GB 4000C15, 2x3090, 1TB SN850, AX1600i
    #2: 10980XE, X299SE2, 8x8GB 4000C15 RGB, 2x2080Ti, 500GB SN850, HX1200

    #12
    bobmitch
    CLASSIFIED ULTRA Member
    • Total Posts : 6224
    • Reward points : 0
    • Joined: 2007/05/07 09:36:29
    • Status: offline
    • Ribbons : 43
    Re: Project BEHEMOT 2021/03/12 05:57:14 (permalink)
    The amount of work you are putting into this rig is unreal!  The quality is "super".  One of the nicest rigs I have seen here, yet...

    MSI MAG X570 Tomahawk;  Ryzen 9 5950X; EVGA RTX 2080TI XC Black; Corsair H115i Pro; 32 GB  Crucial Ballistix Elite DDR4-3600; Samsung 500GB 980 Pro NVMe; Creative SoundBlaster Z; Corsair HX 850i;  Lian Li Lancool II;  EVGA Z15
    RGB Keyboard; and Logitech G903 Lightspeed Mouse
    Heatware:  http://www.heatware.com/eval.php?id=72402    Affiliate code: 1L2RV0BNQ6                                          
    Associate Code:  UD82LJP3Y1FIQPR
     


    #13
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/12 16:38:27 (permalink)
    A lot of work to be done on the weekend :) Cubes M4 12x12 are great solution for assembly.
     
    More pictures soon, I was too tired to do more today :P 
     

     

     

     

     

     

     

     
     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #14
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/13 04:11:23 (permalink)
    I had to drill a few holes so it took me a while. The material is 3mm and 2mm stall so it was not easy to do it with a cheap drill.
     
    I use neodymium magnets for covers to have easy access to cables, pumps etc
     
    Next update todays evening or tomorrow :) I have some buisness to do :) 
     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     
    post edited by arkjas92 - 2021/03/13 04:45:02

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #15
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/13 13:03:23 (permalink)
    Ok, Lets go with next parts!
     

     
     
    To keep the right distance from the top, I use a small "thing" made of two m4 cubes, two m4 washers and an m4 screw.
     

     

     

     
     
     
    It start look very good 
     
     
     

     
     

     

     
     
    The fans will be mounted on top of a magnet frame so I can access the motherboard ports without any problems. The fans will be powered from one PWM cable, so all you need to do is lift the cover with magnets and disconnect the PWM cable to get to the IO ports of the motherboard. Easy and simple solution.
     
    For the fan frame, there will also be dust filter with magnets. The top fans and those at the bottom next to motherboard will intake the air which will be sucked in from the inside by the fans on the coolers at the front, back and behind the mobo tray.
     
     
     

     

     

     

     

     
     
     
    I also use power button, reset button and button for interior light.
     

     

     

     
     
     
    I must make PSU frame because big hole with cover next to PSU is a little bit to short If I want to remove PSU by it
     
     
     

     
     
     
    Cat made quality controll and all is approved 
     
     
     

     
     
     
    David and GOLIATH 
     
    COSMOS is soo small compare to BEHEMOT.
     
    I ordered fittings but will show them when they will reach me after 2-3 weeks.
     
    It will be some special 
     
    Maybe tomorrow or next week I will mount MOBO Tray. I am too tired to do this now 
     
    Now I am going to designe frame for front and back radiators and MORA 420 LT 
     

     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #16
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/14 07:17:15 (permalink)
    Some renders without mobo tray and MORA tray. 
     

     

     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #17
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 26472
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 119
    Re: Project BEHEMOT 2021/03/14 15:05:23 (permalink)
    Very nice details about this custom case
     
    So, are these metal panels being cut with a laser ?

    RTX Project EVGA X99 FTWK 2xEVGA2080Ti EVGA1200P2  Nibbler EVGA X99 Classified 3-GPU Water cooled 1600P2 AIO Folding  X99 2x1080Ti FTW3 Hybrid, 1200P
    Thank You for Your Support      I'm a Volunteer Moderator on the EVGA Forums ... Not an EVGA employee

    #18
    Dukman
    FTW Member
    • Total Posts : 1407
    • Reward points : 0
    • Joined: 2009/08/15 09:47:59
    • Location: They keep telling me Zion
    • Status: offline
    • Ribbons : 4
    Re: Project BEHEMOT 2021/03/14 15:35:35 (permalink)
    I love scrolling thought build threads like this.  

    And I always had the impression that the Cosmos was a fairly large and roomy case.   But your new build makes it look like a mini mid tower. 

    Heatware



     
     
    #19
    Dukman
    FTW Member
    • Total Posts : 1407
    • Reward points : 0
    • Joined: 2009/08/15 09:47:59
    • Location: They keep telling me Zion
    • Status: offline
    • Ribbons : 4
    Re: Project BEHEMOT 2021/03/14 15:35:35 (permalink)
    Great.  My mouse decided to act up with it's double clicks again.

    Mods can you please kill this one.

    Heatware



     
     
    #20
    sparetimepc
    CLASSIFIED Member
    • Total Posts : 2425
    • Reward points : 0
    • Joined: 2009/11/13 09:24:09
    • Location: Altona, IL
    • Status: offline
    • Ribbons : 26
    Re: Project BEHEMOT 2021/03/17 04:43:29 (permalink)
    Nice 👍 progress, hope to see the final project soon




    #21
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/19 14:20:59 (permalink)
    Update
     

     

     

     

     

     

     

     

     

     

     

     

     

     
     
     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #22
    XrayMan
    EVGA Forum Moderator
    • Total Posts : 70308
    • Reward points : 0
    • Joined: 2006/12/14 22:10:06
    • Location: Santa Clarita, Ca.
    • Status: offline
    • Ribbons : 111
    Re: Project BEHEMOT 2021/03/20 16:04:26 (permalink)
     
    Looks great.   

                My Affiliate Code: 8WEQVXMCJL
     
            Associate Code: VHKH33QN4W77V6A
     
                 
     
     
                      
     
     
     
              
     
       
     
               
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     



     
     
     
     
     
     &nbsp
    #23
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 85680
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Belgium
    • Status: offline
    • Ribbons : 75
    Re: Project BEHEMOT 2021/03/21 05:43:59 (permalink)
    This is a great step-up to another level. Outstanding work so far. 

    AMD Ryzen 9 5950X,  Corsair Mp600 Pro M.2 2TB, 128GB DDR4  Crosshair VIII Hero, Asus RX 6900 XT Associate Code: H5U80QBH6BH0AXF

    #24
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/03/25 09:23:08 (permalink)
    Ladies and gentlemens, MORA is here!
    What a huge monster!
    Space between MORA and mobo tray will be enough for barrow fittings and all cables.
    MORA will hide all cables and soft tubes, great!
     
    I worked a little bit with p14 cables and 9 fans have only one 4 pin pwm connector without tons of cables.
     
    Now I can design the mount to the MORA.
     
     

     

     

     

     

     

     

     

     

     

     

     

     

     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #25
    bejellio
    New Member
    • Total Posts : 13
    • Reward points : 0
    • Joined: 2021/02/23 08:00:43
    • Status: offline
    • Ribbons : 0
    Re: Project BEHEMOT 2021/04/01 14:07:14 (permalink)
    This looks awesome. I can't wait to see the finished product.
    #26
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/04/02 08:33:12 (permalink)
    Ok, chasis is almost complete. I wait for barrow fittings.
     

     

     

     

     

     

     

     
     
     

     

     
     
     Kitty quality control :D
     
     
     

     

     

     

     

     

     

     

     

     

     

     

     

     

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #27
    rjohnson11
    EVGA Forum Moderator
    • Total Posts : 85680
    • Reward points : 0
    • Joined: 2004/10/05 12:44:35
    • Location: Belgium
    • Status: offline
    • Ribbons : 75
    Re: Project BEHEMOT 2021/04/02 08:51:17 (permalink)
    This build just keeps getting better and better. I see that the cat is supervising your work. 

    AMD Ryzen 9 5950X,  Corsair Mp600 Pro M.2 2TB, 128GB DDR4  Crosshair VIII Hero, Asus RX 6900 XT Associate Code: H5U80QBH6BH0AXF

    #28
    bejellio
    New Member
    • Total Posts : 13
    • Reward points : 0
    • Joined: 2021/02/23 08:00:43
    • Status: offline
    • Ribbons : 0
    Re: Project BEHEMOT 2021/04/02 08:53:20 (permalink)
    I am thinking about taking the journey and building my own case. I tried scrolling through to find these answers (perhaps I missed them), however, I have the following questions:
     
    1. What material are you making the bulk of the case out of? Aluminum?
        A. follow up question: How heavy is this? Will you need a forklift to carry this around?
    2. Are you doing the metal work or you going through a company?
    3. I have been researching if there are any grounding concerns when making your own case. Is this something you are concerned about?
     
     Keep posting, this is inspirational.
    #29
    arkjas92
    New Member
    • Total Posts : 60
    • Reward points : 0
    • Joined: 2021/01/21 03:58:27
    • Status: offline
    • Ribbons : 2
    Re: Project BEHEMOT 2021/04/02 14:44:12 (permalink)
    bejelli
    1. What material are you making the bulk of the case out of? Aluminum?
        A. follow up question: How heavy is this? Will you need a forklift to carry this around? [sm=laugh.gif

    2. Are you doing the metal work or you going through a company?
    3. I have been researching if there are any grounding concerns when making your own case. Is this something you are concerned about?


    1) I use steel 1.5/2/3mm of thickness. This is very big case with a lots of hardware, water blocks etc in final config so I decided to use heavy and solid materials. Unfortunately, steel is very difficult to machine and very heavy so empty case weight around 45 kg.

    2) I design all parts and send it to my friend's company to make ready elements but some of them I do myself.

    3) Hmmm, interesting because I didnt think about it. I must ask my friend whose did around 6 custom cases.

     EVGA X299 DARK / i9 9940X OC 14x 48 1.255V Mesh 31 1.125V / 4x8GB Patriot Viper STEEL 4000 MHz 15-15-15-28-280-1T 1.465V / Zotac GTX 1080 Ti AMP EXTREME / Corsair MP300 480gb + 960GB / Corsair HX1200i / Microlab FC330 + ASUS XONAR U3 / AOC CQ32G1
    ►LC : HeathKiller IV PRO / BYKSKI N-ST1080TIAMPEX-X / BYKSI B-RAM-D2-X / 2x D5 / Ultitube 150 / 2x Alphacool UT60 560 + MO-RA 420 / 31x Arctic P12/P14 Octo + Farbwerk + HighFlow / Barrow Fittings / EC6 Black
    #30
    Page: 12345.. > >> Showing page 1 of 6
    Jump to:
  • Back to Mobile