Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Hey guys! So very recently I had to send my 1080ti FTW3 card in for RMA as it was getting extremely hot in game anywhere from 80-90c I got my card or a refurbed one back from EVGA and it has been working great until today.
Today my steam auto updated my precision XOC and ever since that update I can’t play a game for 5 minutes without my game crashing, and it even gets to the point where the computer restarts itself.
Is there a known issue with the new update on XOC? If so is there anyway to downgrade it?
Is my GPU bad again?
Thanks for all the help, I apologize if any of these questions are stupid as I am so new to pc gaming.
I have a Corsair 460x case,
Intel i7 6700k
16gb ripjaws g skill DDR4
120 GB SSD
850 watt Corsair PSU cx850m
MSI Z170a pc mate motherboard
Corsair h55 AIO CPU cooler
|
mark_thaddeus
Superclocked Member
- Total Posts : 166
- Reward points : 0
- Joined: 2014/04/07 16:11:08
- Status: offline
- Ribbons : 3
Re: Precision XOC update 4/3/18
2018/04/03 23:46:38
(permalink)
Uninstall XOC 6.2.4 cleanly and re-install 6.2.3 and report back.
4.6 Ghz 4790k - Z97I Plus - 1080 Ti FTW3 Hybrid - 16 GB HyperX Savage 2133 DDR3 - Crucial MX500 1 TB - Seasonic SS 660XP Platinum
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: Precision XOC update 4/3/18
2018/04/04 03:37:22
(permalink)
*reinstall the standalone version from the evga website, rather than the steam version.
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 06:39:08
(permalink)
I will try that tonight after work, I also noticed that the game that I mainly play had a very small update, PUBG had a 40MB update before all of this started happening. I don’t think that would have caused it but it’s on my radar as possibilities.
I’ll go through and uninstall all XOC from my system and download the 6.2.3 standalone on EVGAs website.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: Precision XOC update 4/3/18
2018/04/04 07:45:20
(permalink)
Make sure to delete the retaining evga folder under the program folder as well when you delete it..
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 08:11:36
(permalink)
Sound good! I’ll delete all EVGA folders, under precision and exc. I’ll keep you guys updated to see what happens!
post edited by Beefe1997 - 2018/04/04 08:54:14
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 18:05:38
(permalink)
okay so far it has been good, I deleted all of the EVGA Files from the system that I could i Downloaded the standalone version of XOC from EVGA website of the older version. i have been able to atleast play 1 game so far of PUBG. I am going to attempt to play for a few hours to see how it works after that. The temp this last game got to 70C on the GPU temp sensor. To my knowledge that is a desent temp for running a game on ultra settings, feel free to tell me if I am wrong on that.
I appreciate all the help so far from everyone. ill keep you guys posted on what happens after the hour or so of game play and if i experience any issues
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 18:34:48
(permalink)
Tried playing and all the sensors hit about 70c and then the game crashed, not like the GPU crashed but the game itself. I don’t know if it would have anything to do with my GPU or my computer but over tried uninstalling and reinstalling PUBG as well. I’m kinda at a lost. The last time this happened I underclocked my GPU by like 200 MHz and it worked for some odd reason. I’ll try that again to see if that works. I know they are doing maitnence on the server tonight. So I guess I’ll see if after the maintenance if it works.
I’m kinda just getting upset about the whole thing. I know it could very well be the game but man, I just feel like it’s one thing after another
|
DeathAngel74
FTW Member
- Total Posts : 1263
- Reward points : 0
- Joined: 2015/03/04 22:16:53
- Location: With the evil monkey in your closet!!
- Status: offline
- Ribbons : 10
Re: Precision XOC update 4/3/18
2018/04/04 18:55:26
(permalink)
Have you tried any other games? Could it be that PUBG is still poorly optimized? Do you have a way to test the GPU in another computer? Games crashing and/or restarting of the PC could point to a PSU going bad.
post edited by DeathAngel74 - 2018/04/04 19:03:28
Carnage specs: Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 19:04:06
(permalink)
Everything on like PC parts picker and bottelneck simulators say they should work fine together. And I mean they have that’s the thing. I was able to game for about a week successfully at amazing frame rates exc. and now all the sudden I’m back to the game crashing. It most certainly could be the game, I don’t doubt it but to me it just seems so strange.
I could talk to a friend to try it in his rig to see how it would work but i don’t know for sure. He has a older system.
I will try to play another game but I only have like CSGO and I don’t think that it’s as demanding as PUBG is
I’m sorry if I sound dumb I just don’t understand it and it irritates me cause of how much time and money I have put into my pc.
|
Cordorb
SSC Member
- Total Posts : 636
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Precision XOC update 4/3/18
2018/04/04 19:13:06
(permalink)
did an over lay install so will do a better testing later and clear out old setting
1. Only see 7 items to monitor and 2 are fan speed using one GTX1080 Ti
2. LCD display on G19 keygoard is pre-set to SMALL and I can't read it - We had small-med and large before
and unwinder at least had extra large.
The over all layout does look good just tell us how to get to the secret setting options :-)
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 19:25:31
(permalink)
Cordorb I’m not 100% sure that was meant for this thread, but if it was I have no idea what you said lol
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: Precision XOC update 4/3/18
2018/04/04 19:25:58
(permalink)
Computer restarting itself could mean you have a defective gpu, psu, or your hardware is overheating. Games crashing could be due to software conflicts, or unstable overclocks.
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 19:50:29
(permalink)
Just played about 30 minutes of CSGO on max settings and the gpu temps never reached 50c so I think it has something to do with PUBG
|
Cordorb
SSC Member
- Total Posts : 636
- Reward points : 0
- Joined: 2007/03/18 22:27:50
- Status: offline
- Ribbons : 2
Re: Precision XOC update 4/3/18
2018/04/04 19:54:38
(permalink)
sorry I had too many new XOC update threads open as I was testing the new update
yours was the newest
You may want to drop back a version
to monitor items try resizing the monitor window and you will see GPU and System pop up but only while you hold down the mouse key then they are gone
you MUST have the main XOC window open in the back ground then click it to make the other options stay put. this with Windows 10.
this may help you with your testing of your problem
|
DeathAngel74
FTW Member
- Total Posts : 1263
- Reward points : 0
- Joined: 2015/03/04 22:16:53
- Location: With the evil monkey in your closet!!
- Status: offline
- Ribbons : 10
Re: Precision XOC update 4/3/18
2018/04/04 19:56:53
(permalink)
Have you tried newer drivers? 391.24 and 391.35 have been out for a while. My 1080TI hybrid FTW3 is running fine with the former for almost 2 weeks. You could try wiping PXOC, DDU+new drivers and just install base drivers and PhysX(perform clean install).
Carnage specs: Motherboard: ASUS ROG STRIX X299-E GAMING | Processor: Intel® Core™ i7-7820x | Memory Channels#1 and #3: Corsair Vengeance RGB 4x8GB DDR4 DRAM 3200MHz | Memory Channels#2 and #4: Corsair Vengeance LPX Black 4x8GB DDR4 DRAM 3200 MHz | GPU: eVGA 1080 TI FTW3 Hybrid | PhysX: eVGA 1070 SC2 | SSD#1: Samsung 960 EVO 256GB m.2 nVME(Windows/boot) | SSD#2&3: OCZ TRION 150 480GB SATAx2(RAID0-Games) | SSD#4: ADATA Premier SP550 480GB SATA(Storage) | CPU Cooler: Thermaltake Water 3.0 RGB 360mm AIO LCS | Case: Thermaltake X31 RGB | Power Supply: Thermaltake Toughpower DPS G RGB 1000W Titanium | Keyboard: Razer Ornato Chroma | Mouse: Razer DeathAdder Elite Chroma | Mousepad: Razer Firefly Chroma | Operating System#1: Windows 7 SP1 Ultimate X64 | Operating System#2: Linux Mint 18.2 Sonya (3DS Homebrew/Build Environment)
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 20:07:17
(permalink)
I just ran a unifier Valley Benchmark (basic Edition) The results were: FPS:161.5 Score: 6755 MIN FPS: 37.9 MAX FPS 236.7 CPU model: intel core I7 6700k @ 4.0GHZ GPU model: nvidia GeForce GTX 1080ti Settings were Render: direct3d11 Mode: 1920x1080 full screen Preset: custom Quality: ultra Idk if that says anything about it but it seem to run very smooth and fine. I am on the most recent nvidia driver, I’m gunna try to reinstall right now
post edited by Beefe1997 - 2018/04/04 20:10:17
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/04 20:49:10
(permalink)
It seems like the gpu when ever the game crashes the 3 status LEDs all flash green for like 20 seconds then go back to blue. I don’t know if that would be a sign of a bad GPU or not.
|
KarmNelis
Superclocked Member
- Total Posts : 239
- Reward points : 0
- Joined: 2017/07/10 04:30:08
- Status: offline
- Ribbons : 2
Re: Precision XOC update 4/3/18
2018/04/04 21:36:27
(permalink)
I've been using the newest 6.24 Precision XOC, it works fine with 1080Ti FTW 3 just like before. For anyone who doesn't know how to use Precision XOC, you have to click on all the thermal sensors on its hardware monitor to make sure the fan profile to work. Or the fans won't work accordingly or just stop spinning completely due to no sensors is monitored on the VRAM and power temps and causes components overheat. Once the monitoring is done, save a profile. Close the Precision XOC and reopen it.
post edited by SilentMarket - 2018/04/04 23:19:14
CPU - Intel 8700K - 5.1GHz core, 5.0GHz cache, 1.37v GPU - EVGA FTW3 1080Ti SLI - 2.0GHz core, 12GHz memory Motherboard - Asus Maximus X Hero Memory - Corsair Dominator 4x16GB - 3000MHz default XMP 15-17-17-35PSU - EVGA 1600T2Fire Strike 36838 Extreme 25250 Ultra 14464
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/05 07:36:50
(permalink)
I was able to play about 10 full games for a total time of about a hour on PUBG after they did their server maitenece and patch. I believe it’s just the game being poorest optimized as I experienced no issues last night for that 1 hour. I’ll try to game for 3 hours tonight to see how it goes
|
Beefe1997
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2018/03/02 02:35:33
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/06 08:51:18
(permalink)
Just to keep everyone updated, last night I was avaiable to play for 4 consecutive hours with no issue, the game played great on ultra settings and I had no hiccups at all.
So the conclusion I think I have come to is that the game updated and didn’t run as properly as it did because it wasn’t as optimized.
Thank you all for all the help!!
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: Precision XOC update 4/3/18
2018/04/06 08:54:42
(permalink)
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
mark_thaddeus
Superclocked Member
- Total Posts : 166
- Reward points : 0
- Joined: 2014/04/07 16:11:08
- Status: offline
- Ribbons : 3
Re: Precision XOC update 4/3/18
2018/04/06 18:42:14
(permalink)
4.6 Ghz 4790k - Z97I Plus - 1080 Ti FTW3 Hybrid - 16 GB HyperX Savage 2133 DDR3 - Crucial MX500 1 TB - Seasonic SS 660XP Platinum
|
desini
Superclocked Member
- Total Posts : 161
- Reward points : 0
- Joined: 2008/10/03 00:52:46
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/09 07:40:34
(permalink)
very nice glad you are issue free my friend! game time!
|
ksgnow2010
iCX Member
- Total Posts : 466
- Reward points : 0
- Joined: 2015/09/21 17:56:35
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/10 05:44:59
(permalink)
Glad you got it working.
I was going to suggest testing your PC RAM using windows.
|
desini
Superclocked Member
- Total Posts : 161
- Reward points : 0
- Joined: 2008/10/03 00:52:46
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/11 05:32:58
(permalink)
6.2.5 was released this morning, give it a shot Edit, tested it myself and still does not work sadly. Just wanted to make my post updated.
post edited by desini - 2018/04/11 06:02:21
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: Precision XOC update 4/3/18
2018/04/11 09:14:46
(permalink)
Whoever is working on pxoc seems to want to be fired. Pretty rediculous.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
6502kid
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2018/04/11 18:14:00
- Status: offline
- Ribbons : 0
Re: Precision XOC update 4/3/18
2018/04/11 20:19:43
(permalink)
EVGA Precision X v6.2.3 has been working great for me the last 2 months. With one of those cool Ebay fake GTX 750 Ti cards I got for $37. HA. Pretty sure it is actually some kinda frankencard based on the 550, but XOC works with it great. Just ordered a legit EVGA 1030 and 1060 6gb card to throw at my little Dell Workstation I am converting into a gaming box. One would hope the XOC will work with those as well as it does with this counterfeit card. I will find out soon. @OP. Glad you got your game sorted out there. Just latched onto your thread here mostly to test my new account out. 
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: Precision XOC update 4/3/18
2018/04/13 10:14:17
(permalink)
|
chrisdglong
CLASSIFIED ULTRA Member
- Total Posts : 7220
- Reward points : 0
- Joined: 2008/11/08 15:21:25
- Status: offline
- Ribbons : 7
Re: Precision XOC update 4/3/18
2018/04/13 21:54:44
(permalink)
AHowes
Whoever is working on pxoc seems to want to be fired. Pretty rediculous.
I always use Afterburner, Precision has been terrible since unwinder stopped making it, IMO.
|