EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 11:23:41
(permalink)
Cleaned up some off-topic posts in this thread. Carry on.
|
bigredx86
Superclocked Member
- Total Posts : 128
- Reward points : 0
- Joined: 2021/03/08 08:46:54
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 11:30:26
(permalink)
So has anyone ended up getting on in and installed yet in their rigs? Kind of want to see the eye candy!
 Get up to 10% discounts on all your EVGA purchases if you use my associate code at checkout: RYZ7UG4K0FZZ0CU
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2454
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 42
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 11:41:28
(permalink)
bigredx86
So has anyone ended up getting on in and installed yet in their rigs? Kind of want to see the eye candy!
I saw tresnugget's post on the tweeters.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 11:53:14
(permalink)
AHowes
Be great to see some benchmarks on the card.. currious. May even help sales one would think.
14,891 - Bone stock settings, no OC on the CPU, no XMP on RAM, Win 11, as much closed as possible: https://www.3dmark.com/pr/164404715,299 - As high as I could push clocks only using the PX1 slider, 5.4 OC on the CPU, XMP on the RAM, Win 11, as much closed as possible: https://www.3dmark.com/pr/1644355 Out of the box, not beating my best 3090 KP score of 15,919 (and that wasn't great): https://www.3dmark.com/pr/1379861 I think I'm hitting a wall with voltage, need the classy tool to push it higher. Also think the AIO is having trouble keeping up with the heat. But need to swap out the stock fans, go push/pull to try and help. Still deciding if I want to break down the AIO and try to hook it up to the open loop...
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2454
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 42
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:00:57
(permalink)
might need to bust out the air conditioner to feed the AIO. Also, does it need the copper shims (like the other hybrids) to keep memory temps down? Might be what's holding back your memory clocks. Those are what look to be quite a bit behind your other score. I would think your clocks are close enough to overtake the old score considering the extra cores...but I guess that's been the big question.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
kraade
CLASSIFIED Member
- Total Posts : 2386
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:01:41
(permalink)
Will / won't the classified tool work on this card? , & you have not pushed the mem at all on your 299 run
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2454
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 42
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:02:53
(permalink)
kraade
Will / won't the classified tool work on this card? , & you have not pushed the mem at all on your 299 run
Ah, good call. I just saw that the memory was much lower clocks than the old score, didn't see they were identical to the stock score.
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:03:51
(permalink)
kraade
Will / won't the classified tool work on this card? , & you have not pushed the mem at all on your 299 run
Don't know if the classy tool will work on this card as well. Haven't tried it. Yah, I didn't touch memory at all yet. Failed to mention that. Was doing one thing at a time. Was getting late and I just wanted to finish a run without crashing on the GPU.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:14:06
(permalink)
fragility_V1
AHowes
Be great to see some benchmarks on the card.. currious. May even help sales one would think.
14,891 - Bone stock settings, no OC on the CPU, no XMP on RAM, Win 11, as much closed as possible:
https://www.3dmark.com/pr/1644047
15,299 - As high as I could push clocks only using the PX1 slider, 5.4 OC on the CPU, XMP on the RAM, Win 11, as much closed as possible:
https://www.3dmark.com/pr/1644355
Out of the box, not beating my best 3090 KP score of 15,919 (and that wasn't great):
https://www.3dmark.com/pr/1379861
I think I'm hitting a wall with voltage, need the classy tool to push it higher. Also think the AIO is having trouble keeping up with the heat. But need to swap out the stock fans, go push/pull to try and help. Still deciding if I want to break down the AIO and try to hook it up to the open loop...
Wow.. just wow. Was expecting a much higher score. Even my evga 3090 yltra can get over 15k in PR. What temps were you seeing?
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:15:58
(permalink)
AHowes
fragility_V1
AHowes
Be great to see some benchmarks on the card.. currious. May even help sales one would think.
14,891 - Bone stock settings, no OC on the CPU, no XMP on RAM, Win 11, as much closed as possible:
https://www.3dmark.com/pr/1644047
15,299 - As high as I could push clocks only using the PX1 slider, 5.4 OC on the CPU, XMP on the RAM, Win 11, as much closed as possible:
https://www.3dmark.com/pr/1644355
Out of the box, not beating my best 3090 KP score of 15,919 (and that wasn't great):
https://www.3dmark.com/pr/1379861
I think I'm hitting a wall with voltage, need the classy tool to push it higher. Also think the AIO is having trouble keeping up with the heat. But need to swap out the stock fans, go push/pull to try and help. Still deciding if I want to break down the AIO and try to hook it up to the open loop...
Wow.. just wow. Was expecting a much higher score. Even my evga 3090 yltra can get over 15k in PR.
What temps were you seeing?
Average temp per both runs were ~53-54C.
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:19:31
(permalink)
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
itraumatik
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/02/10 23:51:10
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:48:53
(permalink)
Nice looking rig. Would really be interested on the memory temps , i just bought the 3090ti ftw3 ultra hybrid since i couldnt justify the Kingpin. I just watched framechasers on how he had to mod with copper shims for memory since the temps were high on his. Dont know if they improved the design since then but the product pics look the same as his was.
post edited by itraumatik - 2022/07/08 13:03:43
12900ks sp 93 , Evga 3090ti ftw3 ultra hybrid, 32gb TG 6200 38cl, Asus z690 extreme, Corsair 7000d air, Gigabyte FI32u 32" 4k 144hz monitor. 9.16.2022 RIP evga gpus , nvidia renegotiate with evga, not buying 4xxx cause of You
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 12:56:06
(permalink)
itraumatik
Nice looking rig.
Would really be interested on the memory temps , i just bought the 3090ti ftw3 ultra hybrid since i couldnt justify the Kingpin. I just watched framechasers on how he had to mod with copper shims for memory since the temps were high on his. Dont know if they improved the design since then but the product pics look the same as his was.
Also maybe flip the rad so tubes are at top to make sure any bubbles are in rad and not in pump. Gamers Nexus did a demo about it.
I appreciate it. I haven't benched it yet. But rewatch the video, you want tubes down. You don't want air where the tubes meet the radiator.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2454
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 42
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:03:55
(permalink)
tubes up, down, doesn't really matter much, just have to keep the pump lower than the highest point in the loop (i.e. some part of the rad should be kept higher than the pump, which is sitting right on the GPU die).
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:04:16
(permalink)
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
That Classy tool does work with the Ti. Pushed it too high and temps starting dropping clocks. Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider. Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.
|
itraumatik
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/02/10 23:51:10
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:05:03
(permalink)
tresnugget
itraumatik
Nice looking rig.
Would really be interested on the memory temps , i just bought the 3090ti ftw3 ultra hybrid since i couldnt justify the Kingpin. I just watched framechasers on how he had to mod with copper shims for memory since the temps were high on his. Dont know if they improved the design since then but the product pics look the same as his was.
Also maybe flip the rad so tubes are at top to make sure any bubbles are in rad and not in pump. Gamers Nexus did a demo about it.
I appreciate it. I haven't benched it yet. But rewatch the video, you want tubes down. You don't want air where the tubes meet the radiator.
Just rewatched and ty for the reminder. My custom 420s have tanks (bumps that raise about 1.9" above the tube fittings and are ok to run that way(can trap bubbles in them if any). Will have to change my setup when i get the new card.
post edited by itraumatik - 2022/07/08 13:08:18
12900ks sp 93 , Evga 3090ti ftw3 ultra hybrid, 32gb TG 6200 38cl, Asus z690 extreme, Corsair 7000d air, Gigabyte FI32u 32" 4k 144hz monitor. 9.16.2022 RIP evga gpus , nvidia renegotiate with evga, not buying 4xxx cause of You
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:05:15
(permalink)
B0baganoosh
tubes up, down, doesn't really matter much, just have to keep the pump lower than the highest point in the loop (i.e. some part of the rad should be kept higher than the pump, which is sitting right on the GPU die).
I would think you'd hear it if there was air in the pump.
|
itraumatik
New Member
- Total Posts : 22
- Reward points : 0
- Joined: 2017/02/10 23:51:10
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:10:42
(permalink)
fragility_V1
B0baganoosh
tubes up, down, doesn't really matter much, just have to keep the pump lower than the highest point in the loop (i.e. some part of the rad should be kept higher than the pump, which is sitting right on the GPU die).
I would think you'd hear it if there was air in the pump.
I never hear my computer at all, lol. I use either sony xm4 noise cancelling headphones or my Steelseries nova pro wireless headset when at computer.
12900ks sp 93 , Evga 3090ti ftw3 ultra hybrid, 32gb TG 6200 38cl, Asus z690 extreme, Corsair 7000d air, Gigabyte FI32u 32" 4k 144hz monitor. 9.16.2022 RIP evga gpus , nvidia renegotiate with evga, not buying 4xxx cause of You
|
mylittlepwny2
New Member
- Total Posts : 80
- Reward points : 0
- Joined: 2020/03/25 04:14:13
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:17:22
(permalink)
For those that have them what is your stock boost frequency and temps in PX1 when you hit the boost lock?
What's max clocks
My card got delayed a few days.
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:32:36
(permalink)
fragility_V1
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
That Classy tool does work with the Ti. Pushed it too high and temps starting dropping clocks. Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider.
Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.
Lol when my window unit went out I bought one just for benching. It's not as good as a window unit for cooling the room but it definitely helps with benching.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:32:48
(permalink)
fragility_V1
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
That Classy tool does work with the Ti. Pushed it too high and temps starting dropping clocks. Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider.
Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.
Lol when my window unit went out I bought one just for benching. It's not as good as a window unit for cooling the room but it definitely helps with benching.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
fragility_V1
SSC Member
- Total Posts : 940
- Reward points : 0
- Joined: 2015/07/16 10:02:01
- Location: Southern California
- Status: offline
- Ribbons : 4
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 13:44:11
(permalink)
tresnugget
fragility_V1
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
That Classy tool does work with the Ti. Pushed it too high and temps starting dropping clocks. Ambient is high and AIO can't quite keep up, but at least have a way to push voltage beyond the slider.
Wonder what the wife'll say if I add one of those floor AC units to the room....It's to keep me cool, really.
Lol when my window unit went out I bought one just for benching. It's not as good as a window unit for cooling the room but it definitely helps with benching.
Who needs to cool the room. I'll sit here in a puddle of my sweat as long as that intake air is cool. Build me one of the Jay-special cardboard shrouds.
|
kraade
CLASSIFIED Member
- Total Posts : 2386
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 14:30:30
(permalink)
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
what vert mount is that and is that an XL or dynamic case?
post edited by kraade - 2022/07/08 14:33:52
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 15:20:04
(permalink)
kraade
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
what vert mount is that and is that an XL or dynamic case?
It's the XL and the Lian Li vertical mount specifically for the XL. I did swap out the riser cable for a 4.0 cable, though.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
electrosoft
Superclocked Member
- Total Posts : 120
- Reward points : 0
- Joined: 2009/06/11 12:21:12
- Status: offline
- Ribbons : 0
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 16:40:26
(permalink)
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
Love the way it looks but those fan colors clash hard with the black, white and silver. :)
Asus Z690 Strix D| 12900k 5.2 P-cores
MSI Suprim X Liquid (2835 boost, 3135 OC)| Samsung 980 Pro 1TBG.Skill B-die 4133 2x16GB G1
EVGA P2 1600W | Arctic Cool LF II 420mm
Samsung Odessey mLED 43" 4k
|
zippytek
FTW Member
- Total Posts : 1185
- Reward points : 0
- Joined: 2020/10/06 17:25:35
- Status: offline
- Ribbons : 9
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 17:12:37
(permalink)
Not heard anything about a 1000w for Ti yet but I would start by trying the strix vbios https://www.techpowerup.com/vgabios/245448/245448Looks like I’ll be home tomorrow but delayed delivery until Tuesday. Should have both cards by next Wednesday.
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 17:19:45
(permalink)
electrosoft
tresnugget
Here's the latest classified tool that works with 3090 and supposedly the Ti https://drive.google.com/...WaS5/view?usp=drivesdk
Haven't gotten the XOC bios yet
Also here's mine in my case
Love the way it looks but those fan colors clash hard with the black, white and silver. :)
They do. I installed the new uni fan infinitys when I installed the kingpin and realized the RGB cables that come with the Kingpins fans are the same the uni fan controller uses so i just plugged it into there since i was running out of argb headers on the dark and I haven't had time to get play with the RGB (aka probably set it to all red, take a pic, then turn it off). I was going to replace the kingpin fans but after looking up the specs it looks like the uni fans run 100 rpm faster but the ones EVGA uses may be better. Tbh I have no idea, the specs I found were all over the place. Thermaltake and another company both have fans with the same insane model number so I assume they're thermaltake fans with 80+ CFM but couldn't find static pressure specs whereas the uni fans are 61 CFM with 2.66 mmh2o pressure.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|
Nereus
Captain Goodvibes
- Total Posts : 18170
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 19:42:06
(permalink)
tresnugget
*snip*
Also here's mine in my case
That's a slick looking card for sure.. very nice aesthetic. Your build looks great.
|
kraade
CLASSIFIED Member
- Total Posts : 2386
- Reward points : 0
- Joined: 2020/10/18 09:05:52
- Location: Georgia
- Status: offline
- Ribbons : 7
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 21:53:03
(permalink)
zippytek
Not heard anything about a 1000w for Ti yet but I would start by trying the strix vbios
https://www.techpowerup.com/vgabios/245448/245448
Looks like I’ll be home tomorrow but delayed delivery until Tuesday. Should have both cards by next Wednesday.
Looking good Zippy, we will wait with zippy anti si ci pa , say it say it ... pation
|
tresnugget
SSC Member
- Total Posts : 570
- Reward points : 0
- Joined: 2009/08/30 12:33:21
- Status: offline
- Ribbons : 5
Re: *OFFICIAL* EVGA RTX 3090 Ti / 3090 Kingpin
2022/07/08 22:57:52
(permalink)
Nereus
tresnugget
*snip*
Also here's mine in my case
That's a slick looking card for sure.. very nice aesthetic. Your build looks great.
I really appreciate it. So I did some benching and it's way better than my 3090 KPE but that's not saying much. At stock gpu with my 12900ks at 5.3/4.2 my PR score was 14.8k My best score was 15,666 (metal) with +120 on the core hitting 2220 mhz and +700 on the memory https://www.3dmark.com/pr/1647036I was having some issues, though. Anything over +120 on the core was rebooting my system, sometimes before I even got into 3dmark and I noticed I was getting pcie whea errors and the CPU error light on the board was lighting up. I fiddled with the riser cable on the slot side and the hard reboots stopped but I was getting more whea pcie errors and my scores were going down. I've had issues with the riser cable in the past so tomorrow I'm going to take out the vertical mount and see what happens.
My associates code is O1RWT3TOQ5NNXP8 if you wanna help !e get my EVGA score up :)
|