EVGA

Helpful ReplyNo LED after installing Hydro Copper on Hybrid edition of 2080 TI

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
Nazarus
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2019/03/02 22:40:56
  • Location: Upstate NY
  • Status: offline
  • Ribbons : 6
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/13 20:53:38 (permalink) ☄ Helpfulby Cool GTX 2019/05/17 11:30:58
Finally got it working.  Busy week getting everything together for Mother's day celebration for the wife.
 
Essentially to anyone who has this issue the sockets all face the same way on the card from the PCI-E connector.  All raised edges on the connectors face towards the waterblock or hybrid water cool lines as they exit the card.
 
Video Card all connectors should face towards this direction.  This means when you plug it in the flat side will be on the other side.
 
                       ^      ^ ^ ^
_______________________
|                      ■                |   < LED Sockets
|                                        |
| ________________■_■_■ |   < Fan Sockets
                              |||||||||

Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

#31
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/13 21:10:17 (permalink)
Glad to see it finally worked out. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#32
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/14 09:20:50 (permalink)
Awesome!

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#33
Nazarus
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2019/03/02 22:40:56
  • Location: Upstate NY
  • Status: offline
  • Ribbons : 6
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 10:23:44 (permalink)

 
All done.  I'll get some more pictures when I'm not in testing mode on the thing.  It weighs like 100 lbs...

Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

#34
Sajin
EVGA Forum Moderator
  • Total Posts : 49162
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 199
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 10:42:21 (permalink)
Nice pic. 


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#35
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 10:49:32 (permalink)
Good job! I have the same case.. bought it weeks ago and it's just all in pieces on the floor in my basement just waiting on me to figure out how I want to do it and EVGA to release the dang kingpin copper block already!

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#36
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 11:13:47 (permalink)
Nazarus

All done.  I'll get some more pictures when I'm not in testing mode on the thing.  It weighs like 100 lbs...

Looks very Cool

Associate Code: 9E88QK5L7811G3H


 
#37
Nazarus
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2019/03/02 22:40:56
  • Location: Upstate NY
  • Status: offline
  • Ribbons : 6
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 11:19:56 (permalink)
I had to customize the video cards into that corner.  They blocked everything.  Didn't feel right having this pretty Aorus loop that was blocked by video cards.  Drilled things into place quite a bit on this case.
 
I also had to contact ThermalTake and order an additional PCI bracket so I could hold my capture card on the north side of the case.  Still waiting on that to get here then it's going up on the wall like a big 1980s boombox.

Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

#38
bcavnaugh
The Crunchinator
  • Total Posts : 38977
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 11:22:32 (permalink)
I removed my NU Audio Card for the same.
The Hydro Copper Water Blocks are to nice looking to Cover or Block.

Associate Code: 9E88QK5L7811G3H


 
#39
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6681
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 11:29:58 (permalink)
bcavnaugh
Nazarus

All done.  I'll get some more pictures when I'm not in testing mode on the thing.  It weighs like 100 lbs...

Looks very Cool


Nice to see someone else double posting every now and then hehe

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
#40
Cool GTX
EVGA Forum Moderator
  • Total Posts : 30963
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: offline
  • Ribbons : 122
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 11:35:08 (permalink)
Very Nice Rig, glad your LEDs are working after reversing the plugs (strange that you can reverse the polarity - usually plugs only fit one way)
 
Now you need a Mods Rigs build log - so you can share more pictures & detaild
 
EVGA MODS RIGS

Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

I am a Volunteer Moderator - not an EVGA employee

 https://foldingathome.org -->become a citizen scientist and contribute your compute power to help fight global health threats

RTX Project EVGA X99 FTWK Nibbler EVGA X99 Classified EVGA 3080Ti FTW3 Ultra


#41
badboy64
SSC Member
  • Total Posts : 921
  • Reward points : 0
  • Joined: 2006/06/05 15:11:40
  • Location: Fall River USA
  • Status: offline
  • Ribbons : 0
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 14:06:17 (permalink)
Nazarus

 
All done.  I'll get some more pictures when I'm not in testing mode on the thing.  It weighs like 100 lbs...


Very nice setup indeed. But I couldn't lift anything that heavy as it would just take out my back.

14th Intel® Core™ i9 14900KF CPU 3.2GHz@6.0ghz, Memory 2x24GB GSkill Trident Z Trident Z5 7200 mhz DDR5 Ram,4,000 GB MSI M480 PRO 4TB , Motherboard eVga 690 Dark , Operating System Windows 11 Pro 64-Bit, Msi Suprim X24G 4090, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition, Thermaltake View 91 RGB plus, eVga 1600w P2 PSU, Custom watercooling.
Speed Way  Score 11,055 points.
https://www.3dmark.com/sw/1112818
#42
Nazarus
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2019/03/02 22:40:56
  • Location: Upstate NY
  • Status: offline
  • Ribbons : 6
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/17 18:03:24 (permalink)
Plans are a final lift to mount it on the wall then it's up there for at least 5-10 years. Lol

Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

#43
Nazarus
iCX Member
  • Total Posts : 252
  • Reward points : 0
  • Joined: 2019/03/02 22:40:56
  • Location: Upstate NY
  • Status: offline
  • Ribbons : 6
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/21 22:22:14 (permalink)

Finally working with the thing.  Trying to figure out some Windows related issues but otherwise (BSOD Internal Power Error after wake from sleep) but going great.

Associates: RQAORCJB8JNEFOB/Affiliate:  YTOQRPH9OK

#44
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: No LED after installing Hydro Copper on Hybrid edition of 2080 TI 2019/05/21 23:19:22 (permalink)
Nazarus

Finally working with the thing.  Trying to figure out some Windows related issues but otherwise (BSOD Internal Power Error after wake from sleep) but going great.



That is one hell of a setup you got there Naz. 
 
Add more pics to your modsrig if possible!

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#45
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile