Inomyacbs
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/07/28 23:56:15
- Status: offline
- Ribbons : 0
Hello all, Just finished a new build with my 3080 FTW3 Ultra (10g-P5-3897-KL) and while the system boots the GPU is having major issues and causing crashes with error codes 117 and 116 (will include screenshots). I can boot and change windows settings and run some programs like gpu-z, hwinfo64, and evga precision but as soon as I open a web browser or try to install gpu drivers it crashes. I am able to install drivers in safe mode and the crashes stop if I use DDU to uninstall nvidia drivers or if I disable the 3080 in device manager. They start again if I install an Nvidia driver Temps are showing just fine. It's on a waterblock and sits at 30c. I am able to run heaven benchmark without a crash but performance is terrible and hwinfo shows the clock locked at 435mhz. GPU-z and evga precisionx1 won't report gpu clock speed. I have tried uninstalling and reinstalling drivers several times. I have tried an older driver. I have removed and reseated the gpu. I have tried a fresh install of windows.  Here is all the error codes, temperatures and sensor info Not sure what else to try so any ideas would be more than welcome!
post edited by Inomyacbs - 2021/11/13 15:34:03
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21180
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 15:53:08
(permalink)
Image:  If everything is saying that the video card is bad, I suspect that the video card is bad.
post edited by ty_ger07 - 2021/11/13 15:54:13
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
Inomyacbs
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/07/28 23:56:15
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 16:06:06
(permalink)
I just thought it might be a solvable issue as opposed to an rma and was looking for anything to try before that.
|
kevinc313
CLASSIFIED ULTRA Member
- Total Posts : 5004
- Reward points : 0
- Joined: 2019/02/28 09:27:55
- Status: offline
- Ribbons : 22
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 17:42:48
(permalink)
Did you test the GPU before installing the waterblock? Is it an EK block? 30C sounds kinda high for (idle?) on a block.
post edited by kevinc313 - 2021/11/13 17:43:59
|
Duppex77
Superclocked Member
- Total Posts : 217
- Reward points : 0
- Joined: 2015/09/17 07:44:49
- Location: LONDON, ENGLAND
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 17:49:22
(permalink)
EVGA RTX 3xxx GPU's are failing at an very high rate due to the cheaper manufacturer process they are now using. Especially for the FTW models.
Asus X570 Dark Hero, Ryzen 5900x, 32GB Crucial Ballistix 3600mhz, RTX 3090 FE, 500GB Samsung 980 Pro, BX500 Crucial 2TB, Be-quit 500DX, Corsair AX1000, Razer Basilisk U, Asus Scope TKL Deluxe, ASUS PG279QM G-SYNC. ** I miss the days when EVGA made great GPU's - GTX 1080 Ti FTW3 HYBRID she was so Sexy *** 
|
badboy64
SSC Member
- Total Posts : 924
- Reward points : 0
- Joined: 2006/06/05 15:11:40
- Location: Fall River USA
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 18:09:46
(permalink)
14th Intel® Core™ i9 14900KF CPU 3.2GHz@6.0ghz, Memory 2x24GB GSkill Trident Z Trident Z5 7200 mhz DDR5 Ram,4,000 GB MSI M480 PRO 4TB , Motherboard eVga 690 Dark , Operating System Windows 11 Pro 64-Bit, Msi Suprim X24G 4090, Monitor Acer CG437K, Logitech G910, Razer Lancehead Tournament Edition, Thermaltake View 91 RGB plus, eVga 1600w P2 PSU, Custom watercooling.   Speed Way Score 11,055 points. https://www.3dmark.com/sw/1112818
|
Inomyacbs
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/07/28 23:56:15
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 20:05:17
(permalink)
kevinc313
Did you test the GPU before installing the waterblock? Is it an EK block?
30C sounds kinda high for (idle?) on a block.
I tested to see if it booted but that was it, so don't know if it would have done this right away or not. It is an Optimus absolute ftw block not eK It's a loop with 2 x 240mm rads and is cooling the gpu and a 5950x so 30 seemed reasonable to me and was consistent it never jumped any higher even momentarily.
post edited by Inomyacbs - 2021/11/13 20:19:26
|
Inomyacbs
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/07/28 23:56:15
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/13 20:08:03
(permalink)
badboy64
Both codes point towards a video driver error. More or less it could the video card failing. You could go back to the stock cooler also to see if the problem persists. The links below show both error problems.
That is my current plan just removed it from the loop and am switching out the block for the stock cooler again and then plan to try it in the new system and my older system just to rule out the riser cable (antec striker case can't fit it in without riser cable) I'll update with the results.
|
ty_ger07
Insert Custom Title Here
- Total Posts : 21180
- Reward points : 0
- Joined: 2008/04/10 23:48:15
- Location: traveler
- Status: offline
- Ribbons : 270
Re: New 3080 ftw3 Ultra having major issues
2021/11/14 06:48:04
(permalink)
You didn't say anything about a riser cable. Riser cables are always suspect. Hopefully it is that simple.
ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill
|
Inomyacbs
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 2017/07/28 23:56:15
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/14 15:21:22
(permalink)
ty_ger07
You didn't say anything about a riser cable. Riser cables are always suspect. Hopefully it is that simple.
Yea that is looking like the likely culprit. I put the stock cooler back on and had the same issues. Then I put it in my known working system and it worked perfect. unfortunately there is not room in my new case (antec striker) to put the card straight into the board without using the riser cable so I will order a new cable and see if that solves my issue!
|
Derren001
Superclocked Member
- Total Posts : 171
- Reward points : 0
- Joined: 2009/11/05 19:58:24
- Location: Binghamton, NY
- Status: offline
- Ribbons : 0
Re: New 3080 ftw3 Ultra having major issues
2021/11/14 21:04:04
(permalink)
ty_ger07
Yea that is looking like the likely culprit. I put the stock cooler back on and had the same issues. Then I put it in my known working system and it worked perfect. unfortunately there is not room in my new case (antec striker) to put the card straight into the board without using the riser cable so I will order a new cable and see if that solves my issue!
Nothing a angle grinder can't fix ;p
CPU: Intel i7 6700k Mobo:ASUS Maximus VIII Hero RAM: G.Skill Ripjaws V 32GB GPU: EVGA GeForce RTX 3080 FTW3 Ultra Storage: 500GB Western Digital Blue, 250GB Samsung 850 Evo, 1TB Samsung 840 Evo, 4TB Seagate Ironwolf Pro Soundcard: Sound Blaster Z Series PSU: EVGA Supernova 1000 P2 OS: Windows 10 Pro 64-Bit
|