EVGA

Helpful ReplyK|NGP|N Hybrid and Hydro Copper - Unofficial Auto-Notify Confirmation Lists

Page: << < ..7172737475.. > >> Showing page 75 of 301
Author
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2020/12/31 22:51:36 (permalink)
johnksss
 
Cool.
Just so you know.... I am doing this stuff side by side with you using my card, but am on the 480W bios at the moment.
You can also use PR, just run it in loop/window mode. Once it's up and going put the tools on top and watch and make changes as well.




It seems like it may have changed behavior after a reboot before I did some more testing. Not getting the same power limiting as before, here's a shot of the GPU-Z render test. I ran PR as well and it was even cleaner than that, forgot to screenshot it. Will run another once GPU cools a bit. Also I'm on the non-WHQL hotfix drivers, not sure that should matter though. *Edit - Nevermind something still not right.
 
*Edit - Added PR run, this one was hitting Vrel/Vop and then Thrm/Pwr spike right at the end.. my last one was cleaner with just 2 tiny spikes at very start and very end. *Edit - Added another PR run with OC. *Edit - Added another PR run, this one to me clearly not right. Also TDP% maxes out at 105% which I believe is 450W, correct me if I'm wrong? Best PR: https://www.3dmark.com/pr/723497 (yes I know the rig is ancient, my main rig is currently under construction)
 
post edited by degenerate - 2021/01/01 00:14:02


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 00:10:50 (permalink)
One sec, going to use the 450W max bios.
 
Edit, So why are your fans turned off?
post edited by johnksss - 2021/01/01 00:17:55

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 00:25:25 (permalink)
johnksss
One sec, going to use the 450W max bios.
 
Edit, So why are your fans turned off?


I'm using different fans on a controller.
*Edit- Here's 2 more PR runs, one stock, one OC. Rolled back drivers to 460.89 WHQL. New best which is on the right below: http://www.3dmark.com/pr/723640

post edited by degenerate - 2021/01/01 01:10:02


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 00:52:52 (permalink)
degenerate
johnksss
One sec, going to use the 450W max bios.
 
Edit, So why are your fans turned off?


I'm using different fans on a controller.




Okay, that makes sense.
Open an elevated command prompt window and type this: 
nvidia-smi -q -d power
And tell me what you see.
Now this one doesn't have power as the issue, but does have the others, but still higher than your score because I used higher clocks on stock voltage.

 
 

post edited by johnksss - 2021/01/01 01:01:33

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:23:54 (permalink)
johnksss

Okay, that makes sense.
Open an elevated command prompt window and type this: 
nvidia-smi -q -d power
And tell me what you see.
Now this one doesn't have power as the issue, but does have the others, but still higher than your score because I used higher clocks on stock voltage.
 


'nvidia-smi' is not recognized as an internal or external command, operable program or batch file.
 
I edited my previous post to include 2 new PR runs on the 460.89 WHQL driver.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:29:17 (permalink)
degenerate
johnksss

Okay, that makes sense.
Open an elevated command prompt window and type this: 
nvidia-smi -q -d power
And tell me what you see.
Now this one doesn't have power as the issue, but does have the others, but still higher than your score because I used higher clocks on stock voltage.
 


'nvidia-smi' is not recognized as an internal or external command, operable program or batch file.
 
I edited my previous post to include 2 new PR runs on the 460.89 WHQL driver.


Did you check your windows directory to see if it is or isn't there?
 
I'll take a look at those scores now.
 
Edit:
You may be facing an uphill battle using a 4930K at 4.5 ghz..... speculation of course.
post edited by johnksss - 2021/01/01 01:34:24

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:34:10 (permalink)
johnksss
 
Did you check your windows directory to see if it is or isn't there?
 
I'll take a look at those scores now.


 
Yeah it's in System32.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:34:48 (permalink)
degenerate
johnksss
 
Did you check your windows directory to see if it is or isn't there?
 
I'll take a look at those scores now.


 
Yeah it's in System32.


You ran cmd as admin?
You may nee to jump to that directory and try running it again.
 
Edit:
Try running 150/1200 on MSI Afterburner
 

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:41:56 (permalink)
johnksss
degenerate
johnksss
 
Did you check your windows directory to see if it is or isn't there?
 
I'll take a look at those scores now.


 
Yeah it's in System32.


You ran cmd as admin?
You may nee to jump to that directory and try running it again.
 
Edit:
Try running 150/1200 on MSI Afterburner
 


I had core at 125 and anytime I pushed memory past 250 PR would crash instantly. I'll try 0 on the core with bigger memory offset... getting tired now


I can't run that exe it just instantly closes, tried creating shortcut and adding interval to target still no dice. Also you won't find argument with me regarding the weak 4930k for scores but I don't see why that would affect the power limits in this way...?
 
*Edit - Ok I managed to get 125/1200 here's the screencap, looks like I hit power limiting at 469W early and then Pwr, Thrm, VRel, VOp spike at the very end. I didn't bother pushing past 250 when I crashed at 300 earlier, seems these GPU's are really finicky! I wouldn't have thought I'd get away with 125/1200 after that.
 

post edited by degenerate - 2021/01/01 01:59:22


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 01:59:42 (permalink)
degenerate
johnksss
degenerate
johnksss
 
Did you check your windows directory to see if it is or isn't there?
 
I'll take a look at those scores now.


 
Yeah it's in System32.


You ran cmd as admin?
You may nee to jump to that directory and try running it again.
 
Edit:
Try running 150/1200 on MSI Afterburner
 


I had core at 125 and anytime I pushed memory past 250 PR would crash instantly. I'll try 0 on the core with bigger memory offset... getting tired now


I can't run that exe it just instantly closes, tried creating shortcut and adding interval to target still no dice. Also you won't find argument with me regarding the weak 4930k for scores but I don't see why that would affect the power limits in this way...?
 


With some of these benchmarks it's not just about the power limit. It's about the OS/Driver/Memory timings/memory speed/Cpu Speed/Nvidia settings/Cold and so forth. They all hinder your true graphics score potential. Just because you see solid green doesn't mean it can't do more. And to do away with that power limit issue you need to load the 1000W Kingpin bios. That still does not mean you will get a fantastic score, due to all the other things potentially wrong. As for the power situation, it's really hard to say considering your no where near 520W, but to get closer to that you will need to use the classified tool. Virtually impossible to do without raising the voltage as sajin mentioned a few times in a couple of these threads.
 
And if you can't do more than +250 on memory, then I would pack the card up and ask for an rma. These cards do a minimum of +1000 on their worse worse day. Or try reflashing the 520W vbios from techpowerup. The one for the Kingpin 3090. That's what I did when my card had the same 450W bios on all 3 slots. 
 
I do have a 4930K setup as well, i'll look to see if I ran any Kingpin benchmarks on it or maybe it was just my 3090FTW3.
 
Edit:
Thrm
That is what's killing you. How are you even getting that???
 
Also, my card does not lock 1.1V on 520W vbios either. - NVM - Did a reboot and now it shows 1.1V
 

post edited by johnksss - 2021/01/01 02:09:30

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 02:22:29 (permalink)
Exact same settings and all I did was add nvvdd...


MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 02:28:36 (permalink)
I'm not terribly concerned about my scores right now, won't really be until I get my main rig up & running, I understand my scores on this rig will be low. My main concern is figuring out why I seem to be power limited in some way when I should still have headroom left with the 520W bios (assuming I am not misunderstanding something). I need to determine if I need to RMA or not. Based on my understanding I shouldn't be seeing any green bars in perfcap while using this bios until I hit 520W or 120% TDP.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 02:42:46 (permalink)
degenerate
I'm not terribly concerned about my scores right now, won't really be until I get my main rig up & running, I understand my scores on this rig will be low. My main concern is figuring out why I seem to be power limited in some way when I should still have headroom left with the 520W bios (assuming I am not misunderstanding something). I need to determine if I need to RMA or not. Based on my understanding I shouldn't be seeing any green bars in perfcap while using this bios until I hit 520W or 120% TDP.


If you use the curve, you will have no green bar.
And you can rma, but your new card will do the exact same thing and you might get a worse one at that.

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
Mikeytheangelo
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2020/10/22 08:28:09
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 08:19:20 (permalink)
So any idea when more will drop
ShawnB420
iCX Member
  • Total Posts : 401
  • Reward points : 0
  • Joined: 2015/06/15 21:34:37
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 08:31:52 (permalink)
Mikeytheangelo
So any idea when more will drop


The hope is Monday

 
jennerl
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2006/11/04 17:10:05
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 08:54:35 (permalink)
ShawnB420
The hope is Monday

Unlikely:
"Shawn bb@Shawn9966·Dec 28, 2020
Replying to @EVGA_JacobF
@EVGA_JacobF can we expect more KPE drops on Jan 5th?
 
Jacob Freeman@EVGA_JacobF·Dec 28, 2020
In January likely but don’t have exact dates"
 
https://twitter.com/EVGA_...us/1343675328040816640
 
ShawnB420
iCX Member
  • Total Posts : 401
  • Reward points : 0
  • Joined: 2015/06/15 21:34:37
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 10:25:42 (permalink)
jennerl
ShawnB420
The hope is Monday

Unlikely:
"Shawn bb@Shawn9966·Dec 28, 2020
Replying to @EVGA_JacobF
@EVGA_JacobF can we expect more KPE drops on Jan 5th?
 
Jacob Freeman@EVGA_JacobF·Dec 28, 2020
In January likely but don’t have exact dates"
 
https://twitter.com/EVGA_...us/1343675328040816640
 


Yeah that was me on Twitter. I said the hope is for Monday, I didn’t say how unlikely it was. I’m not in a rush since I’m waiting for Optimus to make a block but still rather grab one sooner then later

 
jennerl
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2006/11/04 17:10:05
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 10:27:34 (permalink)
Haha I didn't even notice it was you!
 
But "January likely" doesn't give one much hope for Monday the 4th or even that week.
 
Edit: just saw were you are on the spreadsheet...at this rate you'll have plenty of time to get that waterblock! 
post edited by jennerl - 2021/01/01 10:29:38
GETCARTER
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2017/04/21 19:09:04
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 11:51:31 (permalink)
I was told that they are only able to produce 300 to 400 units roughly everyone 1.5-2 months. They didn't go into detail if this was solely for the kpe or just their whole lineup.

They are producing them as fast as they can.

So fingers crossed :)
Slackaveli
New Member
  • Total Posts : 24
  • Reward points : 0
  • Joined: 2016/05/31 14:18:33
  • Location: Fayetteville, AR
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 13:05:56 (permalink)
How far down am I guys? 
 
12/16/2020 2:03:28 PM 
jennerl
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2006/11/04 17:10:05
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 14:22:35 (permalink)
Slackaveli
How far down am I guys? 

Once you are added you'll be about 65th on the "list"
 
Assume the list only accounts for ~50% so about 120 deep
 
Slackaveli
New Member
  • Total Posts : 24
  • Reward points : 0
  • Joined: 2016/05/31 14:18:33
  • Location: Fayetteville, AR
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 14:38:30 (permalink)
jennerl
Slackaveli
How far down am I guys? 

Once you are added you'll be about 65th on the "list"
 
Assume the list only accounts for ~50% so about 120 deep
 


Thanks, Bro. The wait is excruciating. 
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 16:15:44 (permalink)
johnksss
 
Or try reflashing the 520W vbios from techpowerup. The one for the Kingpin 3090. That's what I did when my card had the same 450W bios on all 3 slots. 

 
Have a link? I can't find it, I can only find the 500W FTW3 Ultra bios.
 
johnksss
 
Edit:
Thrm
That is what's killing you. How are you even getting that???


No idea man... all my temps are reported fine in all of my software... getting frustrated will probably just RMA.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
johnksss
CLASSIFIED Member
  • Total Posts : 4673
  • Reward points : 0
  • Joined: 2008/06/21 10:18:46
  • Location: Orange County, California
  • Status: offline
  • Ribbons : 3
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 18:45:42 (permalink)
degenerate
johnksss
 
Or try reflashing the 520W vbios from techpowerup. The one for the Kingpin 3090. That's what I did when my card had the same 450W bios on all 3 slots. 

 
Have a link? I can't find it, I can only find the 500W FTW3 Ultra bios.
 
johnksss
 
Edit:
Thrm
That is what's killing you. How are you even getting that???


No idea man... all my temps are reported fine in all of my software... getting frustrated will probably just RMA.


Today My room was quiet and I could hear the coil whine...:( Normally this room is full of noise so I never gave it any thought till I shut off everything and listen....
 
This is the one I have loaded on slot 2 right now.
Unverified.
https://www.techpowerup.com/vgabios/227017/227017
 

MSI MEG Z690 UNIFY-X  | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition


HWBOT-PROFILE
colbzc
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2017/10/19 17:47:13
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 18:46:11 (permalink)
Here is mine. Thank you!

Attached Image(s)

melturface
Superclocked Member
  • Total Posts : 106
  • Reward points : 0
  • Joined: 2009/12/05 11:29:27
  • Location: Detroit
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 19:52:50 (permalink)
pR1maL
hallowen
GETCARTER
Someone here get fed up on the drop and decide to buy all 4 or 5 3090 kingpin's on ebay for the crazy prices? All of them poof gone today lol.

Not all of them....
 
There are still 9 scalped Kingpins for sale and one is on Ebay for $2825.00 where this "Elite Member" has screwed up and shown his EVGA Sales sticker for All to see.
 
Everyone Definitely now knows when he bought it and who he is. 
 
NIB EVGA 3090 KINGPIN / K|NGP|N HYBRID AIO GAMING 24G-P5-3998-KR factory sealed | eBay
 





OMG, is that guy a maniac?   Leaving his postal address plainly visible?   Or is it likely not his address?  Wow.





Huh some people are dumb, someone may end up visiting him one day...
Slackaveli
New Member
  • Total Posts : 24
  • Reward points : 0
  • Joined: 2016/05/31 14:18:33
  • Location: Fayetteville, AR
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 20:03:37 (permalink)
melturface
pR1maL
hallowen
GETCARTER
Someone here get fed up on the drop and decide to buy all 4 or 5 3090 kingpin's on ebay for the crazy prices? All of them poof gone today lol.

Not all of them....
 
There are still 9 scalped Kingpins for sale and one is on Ebay for $2825.00 where this "Elite Member" has screwed up and shown his EVGA Sales sticker for All to see.
 
Everyone Definitely now knows when he bought it and who he is. 
 

 





OMG, is that guy a maniac?   Leaving his postal address plainly visible?   Or is it likely not his address?  Wow.





Huh some people are dumb, someone may end up visiting him one day...


i mean, it's Memphis. Everybody packin.
whitevilsp
New Member
  • Total Posts : 30
  • Reward points : 0
  • Joined: 2020/12/10 13:46:25
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 21:41:16 (permalink)
jwenta123

I'm 99% sure when you buy something and sell it, be it merchandise or something like a car. If you get more than what you paid for, that amount (profit) is income and requires to be taxed or can be considered tax fraud. But again, I don't think 500 bucks for one person is going to be troublesome, this is more for the high rollers lol



I've got a devious idea,  any product that asn't been registered by the first owner has to be sold at the same price if sold to someone else.    
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/01 22:10:06 (permalink)
johnksss
Today My room was quiet and I could hear the coil whine...:( Normally this room is full of noise so I never gave it any thought till I shut off everything and listen....
 
This is the one I have loaded on slot 2 right now.
Unverified.
https://www.techpowerup.com/vgabios/227017/227017
 


Coil whine on mine is atrocious, easily the worst I've ever heard personally. Almost as bad as the coil whine is the pump noise, I had to use a magnet just to shut it up.
 
Thanks for the link, doubt it'll fix my issues but worth a shot.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
QueueCumber
Superclocked Member
  • Total Posts : 239
  • Reward points : 0
  • Joined: 2007/04/19 09:55:46
  • Status: offline
  • Ribbons : 0
Re: EVGA GeForce RTX 3090 K|NGP|N - Unofficial Auto-Notify Confirmation List 2021/01/02 08:10:04 (permalink)
Thought people on the wait list should know, I've now gotten two broken KPE edition cards. Both boot into windows but one freezes intermittently and one freezes constantly under load. You truly are playing the lottery with these cards. Besides getting a card that underperforms (as most people received versus the cherry picked ones for their Kingpin OC LN2 broadcasts), you also risk getting a card that just doesn't work for gaming AT ALL. Good luck!


Page: << < ..7172737475.. > >> Showing page 75 of 301
Jump to:
  • Back to Mobile