Anywhere to find green sleeved cables?
 

Today and white sleeve set are sold in EVGA Europe, only blue are available.
I hope now EVGA will send new shipment. If we wait to Europe sold and blue to get again...

You mean on EVGA Individual Sleeves two different types or some other cables.
If you think on other cables that's normal, many different types are available, some of them are similar to plastic as you say and other is paracord or some kind of sleeves similar to paracord.
EVGA Europe long time didn't get black cables, USA shop probably have big supplies and Europe nothing.
I wait them to become available and every day almost I check on site...
They promised availability of sleeve cables, not one series. 

I'm not sure how these new cables looks like but cables on NEX1500 are something between plastic and fabric.
They are compact with wire, you can't move them over wire, you can't notice wire in sleeve. 
MDPC-X is example more plastic feeling.
I can't wait to Europe get them. Only black and red are not available, most wanted colors.

CptSpig
I have a set of blue cables. Love them! See my MODS RIGS
 

Your choice is really weird. I mean compared with your components, I expected black.
I hope I will not have 60 years when Europe get black set. I searched and other shops but only EVGA sell them in Europe.

Yes cables are for me, but must be black. 

I haven't seen anyone address the capacitor question. This is a very valid question. Dirty power reduces the life of electronics. And these components are not cheap. I personally asked customer support this question and here is the answer I was given.
Comment: I have an EVGA 1300 G2. I have 2 questions. 1st, the head snapped off one of the mounting screws. If I am unable to grab what is left with pliers, will my warranty be voided if I open the case so safely extract the broken screw? 2nd, I would like to make a custom set of sleeved cables. The OEM cables have what looks like it could be a capacitor installed under the heat shrink. This is not something that would look all that great on individually sleeved wires. I know EVGA offers sleeved cable that don''t appear to have a capacitor inline. So... Can I safely make cables without a capacitor installed inline? I would have thought it was there for a reason. And I really don''t want to replace a perfectly good PSU just to make a set of cables. Thank you for your time, Brian.
 
The screw stuck would not void the warranty but opening the power supply would and is highly not recommended.

You are able to make your own sleeved cables if you would like. The cable set you offer is a better gauge wire which does not require the capacity like on the stock cables.

Thank you,
EVGA Support
 
This is copy and posted from the email. I'm having a hard time buying into this answer. Anyone else? I would LOVE an engineer from EVGA to comment on this. I read a review on JonnyGURU about a non EVGA PSU that also used capacitors in the harness. This PSU did very well when tested in the "as shipped" form. The reviewer swapped out the harness for ones without the capacitors and the results were a 29mV ripple!
 
 
 
 

I would choose EVGA. I can buy Cable Mod but I don't want.
I wait EVGA and that's my intention to bent harder I like more flexible as EVGA.
Because of that for me they are better than others or manual sleeve cables.
Now I think more and more for option to buy from USA because it's not fair, they sell only 2 months in total black sleeve in Europe.

CptSpig
If you have a EVGA power supply than get EVGA cables. You can't go wrong.

+1.
Logic answer if option is on table.

.

Do you guys just have a cable set for VGA Cables? I have red ones that I dont like at all... And since I have a black and White build. Do you guys provide a Custom White sleeved VGA cable set?

Hey yall.  I am just wondering what the length of these cables are.  Like I am currently building a comp and having to buy parts here and there over the next 2 months.  I am using a Thor-v2 W case (full ATX case) and the motherboard is a asus sabertooth z97 mark s (limited edition).

The motherboard has a 8 pin power connection that will end up at the very top of the case and the power supply is of course mounted on the bottom.  The case dim are 22.84" x 9.14" x 20.08" and of course cable management will lower the cable a bit as well. 

They are 16awg through out and signal wires are 18awg. The signal I am referring to is the green wire to tell the psu that the motherboard is working. There are a few other small 18awg wires, but not many. The sleeved kits are actually really nice.

Jfeil

Scarlet-Tech
They are 16awg through out and signal wires are 18awg. The signal I am referring to is the green wire to tell the psu that the motherboard is working. There are a few other small 18awg wires, but not many. The sleeved kits are actually really nice.

That's great to hear, I think I'll go ahead and pull the trigger then.  Thanks for the input, Scarlet-Tech!

Vsg deserves more credit. We get some amazing reviews out of him :-)

v1ral
I think this has been asked before but here it goes.
I just bought an EVGA 850 G *not G2*, I am wondering if the cable kits marked as G2 etc will be a direct replacement?  
Thanks for your time!

Please contact EVGA tech support