xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/14 14:10:30
(permalink)
nateman_doo
If that already exists, what would be the point of me making one?
I mean, make a cooler for the Biostar 5770 or Asus 5750 that i mentioned, that has a similar design as the 4850 single slot cooler. I can't just take a cooler off a 4850 and put it on a non reference 5770 or 5750, let alone a reference card of those types. I esentially want the best possible cooling for the 5770 or 5750 in a single slot - neither of them come in a single slot variant. And there are no aftermarket single slot heatsinks.
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/14 14:48:06
(permalink)
I just read your post above me quoting myself. I musta missed it lol. Here is the Asus 5750 nekked. I can't find one of the biostar though. 
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/14 14:51:32
(permalink)
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2010/07/14 19:14:39
(permalink)
GET THAT GTX RABID!!!!!!!!  *cough* then sell it to me later for $50ish so I can put it on a tek 9 *cough*
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/14 19:50:38
(permalink)
I am considering it, but i really would only want it if i knew its oc'ing max, and it was high (higher than the bfg 8800gtx my family friend gave me, remember).
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/14 20:08:46
(permalink)
xxrabid93
I just read your post above me quoting myself. I musta missed it lol. Here is the Asus 5750 nekked. I can't find one of the biostar though.
Wow, really? thats it? just a chip and 4 ram modules just right there together? I was looking for a challenge ;)
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/14 20:16:36
(permalink)
There are also 4 ram chips on the back, but that doesn't matter really. I would think the challenge would be fitting a fan somewhere in there... Would it be possible for you to make something that can hold the fan from the stock 4850 cooler, like in the pic i posted above (posting here again so you don't have to scroll back up  )  I was thinking of trying to get a hold of a stock 4850 cooler and taking the fan out, have you make a custom heatsink, and maybe a custom shroud.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/15 02:55:02
(permalink)
Why do you want to go all out on this card? Its getting time to refinish your floor btw :P
post edited by nateman_doo - 2010/07/15 04:50:36
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/15 10:55:18
(permalink)
nateman_doo
Why do you want to go all out on this card?
Its getting time to refinish your floor btw :P
Well, i have a special little build in the works and i want the most powerful card i can get in a single slot, 7 1/2" - 7 3/4" long with power connector; but i don't want to show my design yet.  I wouldn't need you to do the block now, but sometime in the future when i finally get all the $ to build it. Also, that floor isn't mine. That image i found on google. 
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/15 11:14:48
(permalink)
xxrabid93
nateman_doo
Why do you want to go all out on this card?
Its getting time to refinish your floor btw :P
Well, i have a special little build in the works and i want the most powerful card i can get in a single slot, 7 1/2" - 7 3/4" long with power connector; but i don't want to show my design yet. I wouldn't need you to do the block now, but sometime in the future when i finally get all the $ to build it.
Also, that floor isn't mine. That image i found on google.
Ah.. msg them and tell them to refinish the floor! The Doo shop will be shut down from 24 July, until the very beginning of October (around 2 months). If your still interested in it, we'll talk about it then-but feel free to keep planning.
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/15 11:44:12
(permalink)
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/15 12:11:04
(permalink)
Me 2, planning a CNC upgrade when i get back.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2010/07/15 15:21:37
(permalink)
nateman_doo
Me 2, planning a CNC upgrade when i get back.
I wanna see what you make with it. 
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/07/15 16:42:55
(permalink)
ShockTheMonky
Been a rough month with my health, my brother passing away and moving. Was finally able to sell my 975 EE on the Bay and will be paying for and having my new 980x shipped later today. So I'm back but not in a big way yet. Things need to settle down a little more first.
Oh reggie. I forgot who it was that screwed you on that cpu deal till a several weeks ago. I bought a EK 760 Full mobo block from him and realized who it was when I saw his heat. He shipped the block but he bs'ed me on the shipping and ended up taking over a week to show up. Trust me that will never happen again. 
Sorry to hear about your rough month. Saw your post on heatware a while ago made me laugh kind of I figured thats what happened. I finally got them to remove my one negative mark for that transaction. Hope things mellow out in your world and im sure a 980x will help you get back in a pretty big way wether you take your time or not.
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2010/07/16 06:25:17
(permalink)
Wow Bstock deals are crazy. With my EVGA bucks I could get an 8800GTS for free, or a 790i Ultra for $10.. lol. I'm officially tempted.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/16 07:59:04
(permalink)
Halo_003
I wanna see what you make with it.
I will even post pictures of the entire process. And yes... maybe even a How-to Guide.  Ask me why I don't have a 980X yet... thats the reason. a hundred pounds of steel sitting on a home-made bench in my basement.
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/07/16 09:06:13
(permalink)
reggiesanchez
ShockTheMonky
Been a rough month with my health, my brother passing away and moving. Was finally able to sell my 975 EE on the Bay and will be paying for and having my new 980x shipped later today. So I'm back but not in a big way yet. Things need to settle down a little more first.
Oh reggie. I forgot who it was that screwed you on that cpu deal till a several weeks ago. I bought a EK 760 Full mobo block from him and realized who it was when I saw his heat. He shipped the block but he bs'ed me on the shipping and ended up taking over a week to show up. Trust me that will never happen again.
Sorry to hear about your rough month. Saw your post on heatware a while ago made me laugh kind of I figured thats what happened. I finally got them to remove my one negative mark for that transaction. Hope things mellow out in your world and im sure a 980x will help you get back in a pretty big way wether you take your time or not.
Well it's funny how life can throw yin and yang at you. Since my brother of 59 passed our family has regained the companionship of 2 long lost neices and nephews. One exits and one enters. It's the balance of life. As for the 980x. So far I'm at 4544mhz LinX stable. Have already snagged 1 gold cup and getting started on more.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/07/16 15:45:56
(permalink)
ShockTheMonky
reggiesanchez
ShockTheMonky
Been a rough month with my health, my brother passing away and moving. Was finally able to sell my 975 EE on the Bay and will be paying for and having my new 980x shipped later today. So I'm back but not in a big way yet. Things need to settle down a little more first.
Oh reggie. I forgot who it was that screwed you on that cpu deal till a several weeks ago. I bought a EK 760 Full mobo block from him and realized who it was when I saw his heat. He shipped the block but he bs'ed me on the shipping and ended up taking over a week to show up. Trust me that will never happen again.
Sorry to hear about your rough month. Saw your post on heatware a while ago made me laugh kind of I figured thats what happened. I finally got them to remove my one negative mark for that transaction. Hope things mellow out in your world and im sure a 980x will help you get back in a pretty big way wether you take your time or not.
Well it's funny how life can throw yin and yang at you. Since my brother of 59 passed our family has regained the companionship of 2 long lost neices and nephews. One exits and one enters. It's the balance of life.
As for the 980x. So far I'm at 4544mhz LinX stable. Have already snagged 1 gold cup and getting started on more.
Yea! Alright Shock! Good deal on the 980x. And sorry to hear about your brother...59 is too young....
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion  
|
xxrabid93
FTW Member
- Total Posts : 1315
- Reward points : 0
- Joined: 2008/09/08 13:49:33
- Location: Naperville, IL
- Status: offline
- Ribbons : 8
Re:Get It Colder......2
2010/07/16 19:51:49
(permalink)
WTG Shock! Ok, so i think i'm gonna need some help with some ram stuff. I was working on my q9300/EP45-UD3P rig last night. I am focusing on Superpi 1m and 32m, trying to get those WR's, or at least top 3. Frequency has only helped so much, and i think it is time i work on the ram. It runs stock 1:1 533bus (so 1066mhz) 5-5-5-15 @ 2.1v flawlessly. I was trying different timings and voltages last night, and couldn't get anything to work. For example, i tried 1:1 ratio, 523 bus, with 5-4-4-15 @ 2.3v and 4-5-5-15 @ 2.3v. Both of them failed miserably. What kind of stuff do i need to tweak (besides ram voltages) to get lower timings on my ram?
|
Tribbs
Superclocked Member
- Total Posts : 247
- Reward points : 0
- Joined: 2009/02/13 07:42:36
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2010/07/17 21:17:39
(permalink)
hey guys long time no post all dice equipment is here (thanks nate), although I am kinda bummed th dry ice place 10 minutes away has shut down so I will have to go about 35 minutes and back for my fun stuff.
now if I could just find the time to do that i would be set
I hope everything is going good for you guy, or better at least
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/07/17 23:21:11
(permalink)
@rabid... if your running 2d benches your better off shooting for more mhz than tighter timings ????? or was it vice versa I cant remember now
post edited by reggiesanchez - 2010/07/17 23:27:56
|
Halo_003
Omnipotent Enthusiast
- Total Posts : 10297
- Reward points : 0
- Joined: 2009/03/20 18:18:10
- Status: offline
- Ribbons : 51
Re:Get It Colder......2
2010/07/18 20:21:05
(permalink)
reggiesanchez
@rabid... if your running 2d benches your better off shooting for more mhz than tighter timings
????? or was it vice versa I cant remember now
Other way around I believe. I think timings really help in 2d.
i7 7700K - ASUS Maximus IX Apex - 16GB G.Skill TridentZ RGB 3466MHz C16 - 5700 XT 50th Anniversary
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/07/18 20:57:11
(permalink)
ya I think your right.... I gotta get my rig cold so I can bench this BLOWS....
|
Rudster816
CLASSIFIED Member
- Total Posts : 2080
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re:Get It Colder......2
2010/07/19 01:15:25
(permalink)
From my experience, tighter timings is better for 1M, but you need more mhz for 32M SuperPi. Not sure about Wprime\FastPi
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead  
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/19 20:36:53
(permalink)
I just had to share this bit of sexy with you guys.  Want to know the best part...? Its not even lapped! Thats just my facing bit on the mill. I just spend 16 hours in my basement trying to catch up on all the projects. This is my last week at home so I need to finish everything.
post edited by nateman_doo - 2010/07/20 10:08:42
Attached Image(s) 
|
threedhero
iCX Member
- Total Posts : 356
- Reward points : 0
- Joined: 2008/11/09 09:30:15
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/07/20 20:25:50
(permalink)
Looking good Nate refining your skills I see  Making a pot or another project..... Last week home, got a vaca somewhere?
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:Get It Colder......2
2010/07/20 20:59:27
(permalink)
going back on active duty. It could not have come at a worst time.
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/07/20 21:07:44
(permalink)
nateman_doo
going back on active duty. It could not have come at a worst time.
SAY WHAT??????? 
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/07/20 21:34:33
(permalink)
nateman_doo
going back on active duty. It could not have come at a worst time.
God Bless You, man! Where are you off to?
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/07/20 23:46:55
(permalink)
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|