lamadBro
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 4/22/2020
- Status: offline
- Ribbons : 0
Wednesday, April 22, 2020 1:25 PM
(permalink)
Hi, guys,
my RTX 2070 XC runs on 100% fan speed at about 73° Celsius I installed MSI Afterburner and X1 and tested different fan curves. I also increased the temp. limit to 88° Celsius -> all with the result that the fans jump up to 100% at 73° Celsius, run a few seconds and then go back to 70%. The fan curves work until the card reaches 73°.
I have already tested the following things:
- Both fans separately in 10% steps to 100% fan speed -> works
- Card removed and cables checked
- MSI Afterburner and X1 bring the same result
Do any of you have any idea what else I can test?I bought the card last year in May and have been satisfied with it ever since.
Thanks in advance!
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 3:35 PM
(permalink)
You shouldn't have both X1 and AFB installed since they both can conflict with each other and possibly give you issues on the card. You should choose one or the other.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 3:35 PM
(permalink)
Welcome to the EVGA Forums Hysteresis - is set to 0 by default ... raising it to say 5 would help, as the fan would continue to run until temp drops 5C below your set point Also - look at your case fans ...you need to get the heat out of your case ... where the GPU dumps most of its heat Ultimate Self-Starter Thread For New Members
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
lamadBro
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 4/22/2020
- Status: offline
- Ribbons : 0
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 7:11 PM
(permalink)
First of all, thanks for the quick responses. I had first installed AFB, uninstalled it and then installed X1. Sorry, I hadn't made it clear. Unfortunately the tip with the hypertesis didn't bring any change either. Additionally I installed GPU-Z to check if the display in X1 is correct at all. I noticed the following (see screenshot): Fan1 shows only 64% speed, but the RPM is 3765, compared to Fan2 which shows 2140RPM at the same speed. I think that the fan control has a damage. What do you think? Should I RMA it? 
post edited by Cool GTX - Wednesday, April 22, 2020 8:27 PM
Attached Image(s)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 7:13 PM
(permalink)
lamadBro
First of all, thanks for the quick responses.
I had first installed AFB, uninstalled it and then installed X1. Sorry, I hadn't made it clear.
Unfortunately the tip with the hypertesis didn't bring any change either.
Additionally I installed GPU-Z to check if the display in X1 is correct at all. I noticed the following (see screenshot): Fan1 shows only 64% speed, but the RPM is 3765, compared to Fan2 which shows 2140RPM at the same speed.
I think that the fan control has a damage. What do you think? Should I RMA it?
Quite possibly. I would get a hold of EVGA support and let them know everything you've stated here.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
lamadBro
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 4/22/2020
- Status: offline
- Ribbons : 0
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 7:26 PM
(permalink)
GTXJackBauer
Quite possibly. I would get a hold of EVGA support and let them know everything you've stated here.
Thanks. I just opened the support ticket.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 8:22 PM
(permalink)
Fixed you picture
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2070 XC 100% Fan at 73°
Wednesday, April 22, 2020 9:14 PM
(permalink)
|
lamadBro
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 4/22/2020
- Status: offline
- Ribbons : 0
Re: RTX 2070 XC 100% Fan at 73°
Thursday, April 23, 2020 7:39 AM
(permalink)
Sajin
Normal...
That can´t be normal. Only Fan1 shows high RPM. Fan2 runs according to its fan curve
|