Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Hi all, I have a strange issue with my card.
Let Me explain, I play any game and fg. Card temp is 72 degree(celcius) fan rpm are 1800 and fan controller report 50%. But once my card hit 74 degrees fans automaticly kick to 3900rpms and hold that speed until temp drop to 73. In that time fan controller shows 60% which is not right as when I did tests 3900 rpms are 100% fan. I have tried precisionx and afterburner fan curve but once card hit 74 degrees it kicks in to full speed. What should I do to prevent it? I have latest bios and tried different drivers, bios version: 90.04.0B.40.BA
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:03 PM
(permalink)
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:06 PM
(permalink)
What do you mean saying normal? Card is under thermal limit etc so it should not behave like that.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:24 PM
(permalink)
I had a 2080 ti ftw3 vbios loaded to my 2080 ti xc gaming card and it always turned the fans on to above 100% speed when the gpu hit around 75-76c even when I already had my fans manually set to 100% static speeds. Evga seems to have finally changed their default fan profiles on their vbios to prevent the card from getting too hot.
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:34 PM
(permalink)
Ok, I get it. I am curios, can I flash Ftw3 ultra bios on my xc card?
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:38 PM
(permalink)
Yes, you should be able to.
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 9:45 PM
(permalink)
Ok I will try tomorrow, anyway I think I will buy accelero Iii as at the moment card is just too loud.
post edited by Joloxx9 - Sunday, April 19, 2020 9:47 PM
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 10:11 PM
(permalink)
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2080 XC fan problem.
Sunday, April 19, 2020 11:32 PM
(permalink)
Joloxx9
Ok I will try tomorrow, anyway I think I will buy accelero Iii as at the moment card is just too loud.
Probably better off spending a bit more and grabbing a hybrid Kit for it either from EVGA or NZXT's G12 GPU bracket with your choice of an AIO, preferably a 240mm. Just have to make sure the AIO is compatible with the GPU bracket.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Monday, April 20, 2020 5:48 AM
(permalink)
GTXJackBauer
Joloxx9
Ok I will try tomorrow, anyway I think I will buy accelero Iii as at the moment card is just too loud.
Probably better off spending a bit more and grabbing a hybrid Kit for it either from EVGA or NZXT's G12 GPU bracket with your choice of an AIO, preferably a 240mm. Just have to make sure the AIO is compatible with the GPU bracket.
At this moment I have contacted seller (scan.co.uk) as I would like to RMA it. The card doesn't behave like it should, got a friend with similar card, however its MSI and it does not do jetengine inside his case after reaching 75 degrees, and when he set 100% fan speed on 85 degrees it change, not like in my when I can set 75% fan for 75 degrees but card always trigger 100% when it hits 74. Also I just can't spend another 100-150GBP to "fix" the card, the card was expensive by itself so I demand reliability from it.
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10335
- Reward points : 0
- Joined: 4/20/2010
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: RTX 2080 XC fan problem.
Monday, April 20, 2020 2:49 PM
(permalink)
Joloxx9
GTXJackBauer
Joloxx9
Ok I will try tomorrow, anyway I think I will buy accelero Iii as at the moment card is just too loud.
Probably better off spending a bit more and grabbing a hybrid Kit for it either from EVGA or NZXT's G12 GPU bracket with your choice of an AIO, preferably a 240mm. Just have to make sure the AIO is compatible with the GPU bracket.
At this moment I have contacted seller (scan.co.uk) as I would like to RMA it. The card doesn't behave like it should, got a friend with similar card, however its MSI and it does not do jetengine inside his case after reaching 75 degrees, and when he set 100% fan speed on 85 degrees it change, not like in my when I can set 75% fan for 75 degrees but card always trigger 100% when it hits 74.
Also I just can't spend another 100-150GBP to "fix" the card, the card was expensive by itself so I demand reliability from it.
Your GPU is fine. It's your factory built-in fan profile. If you want, you can always change it via manual fan curve otherwise leave it alone and welcome to air cooling on a GPU. Your friends has a different profile and even gets very close to the GPUs thermal limit of 89c. The cooler the GPU runs, the better.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Monday, April 20, 2020 3:04 PM
(permalink)
GTXJackBauer
Joloxx9
GTXJackBauer
Joloxx9
Ok I will try tomorrow, anyway I think I will buy accelero Iii as at the moment card is just too loud.
Probably better off spending a bit more and grabbing a hybrid Kit for it either from EVGA or NZXT's G12 GPU bracket with your choice of an AIO, preferably a 240mm. Just have to make sure the AIO is compatible with the GPU bracket.
At this moment I have contacted seller (scan.co.uk) as I would like to RMA it. The card doesn't behave like it should, got a friend with similar card, however its MSI and it does not do jetengine inside his case after reaching 75 degrees, and when he set 100% fan speed on 85 degrees it change, not like in my when I can set 75% fan for 75 degrees but card always trigger 100% when it hits 74.
Also I just can't spend another 100-150GBP to "fix" the card, the card was expensive by itself so I demand reliability from it.
Your GPU is fine. It's your factory built-in fan profile. If you want, you can always change it via manual fan curve otherwise leave it alone and welcome to air cooling on a GPU.
Your friends has a different profile and even gets very close to the GPUs thermal limit of 89c. The cooler the GPU runs, the better.
No its not ok, I think you missed the line where I said even when I select fan curve manualy it will respect it only till it hits 74, also fan controller still report 65% of fan speed while real speed is 100%. I called Eu support and they agree card looks faulty and they blame fan controller, I will rma it
|
lamadBro
New Member
- Total Posts : 6
- Reward points : 0
- Joined: 4/22/2020
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Thursday, April 23, 2020 7:18 AM
(permalink)
I have the same issue with my RTX 2070 XC. Fan1 reports 61% fan speed while the RPM are over 3700RPM - Fan2 works normally at 61% fan speed and 2100RPM. I opened a support ticket too.
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Thursday, April 23, 2020 9:23 AM
(permalink)
lamadBro
I have the same issue with my RTX 2070 XC. Fan1 reports 61% fan speed while the RPM are over 3700RPM - Fan2 works normally at 61% fan speed and 2100RPM. I opened a support ticket too.
I have card under RMA currently, waiting for invoice approval, according to what they have seen on screenshots they recon there is something wrong with the fan controller.
|
Joloxx9
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 3/7/2015
- Status: offline
- Ribbons : 0
Re: RTX 2080 XC fan problem.
Wednesday, May 06, 2020 6:49 AM
(permalink)
I will just update for more people with this problem,
I do not know how people could respond that it is normal behavior.
I did RMA and new card is on its way to me.
|