EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
0.3.7 is up now with more bugfixes. www.evga.com/px1 Version 0.3.7 BETA Release: 11/15/2018 - Improvements to MCU updater
- Improvements to OSD
- Fix for profiles not saving on some system setups
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 16:56:14
(permalink)
 Having trouble keeping up with you guys now! Thanks for the quick updates on the software. Whoo looks like the fan speed sliders on right hand side may be reporting correctly now for me, for the first time. Nope scratch that - they do on initial loading of the profile, but if you scroll through the GUI screens upon returning to the main screen those sliders show 0 again, whilst the fan rpm's on the left are still reporting correctly. Profile saving and loading still working good for me so far, they did in 0.3.6 for me also.
post edited by d.burnette - 2018/11/15 17:18:48
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 17:27:43
(permalink)
Edit: Disregard think I am just way too tired this evening - seeing things I guess.
post edited by d.burnette - 2018/11/15 17:31:20
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
DisplacerGoat
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/10/11 15:53:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 17:40:19
(permalink)
Good:
Application icon load is much faster (~1 sec instead of ~15 seconds to open).
Setup settings appear to remain saved after restart.
Bad:
GUI still shows two fans instead of three.
LED does not illuminate after "apply," "save," or whatnot.
I have "start minimized" checked, but I hope to have that mean, "Start minimized on startup," and not start minimized every time I open the application.
VF Curve Tuner does not easily identify that it is actually working and doing something. Poor GUI.
Intel i7-8700K @ 5.2 Ghz Asus ROG Maximus X Apex EVGA 2080 TI FTW3 2x 16 GB G. Skill F4-3000C14 2x Samsung 960 Pro 1 TB m.2 EVGA Supernova 1300 G2
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 17:44:14
(permalink)
 Indeed EVGA is. After Installing Version 0.3.6 BETA my EVGA GeForce RTX 2080 Ti XC ULTRA Name changed to EVGA GeForce RTX 2080 Ti XC. This may be due to installing the HC Water Block as well.
post edited by bcavnaugh - 2018/11/15 17:47:02
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 17:45:40
(permalink)
DisplacerGoat
Good:
Application icon load is much faster (~1 sec instead of ~15 seconds to open).
Setup settings appear to remain saved after restart.
Bad:
GUI still shows two fans instead of three.
LED does not illuminate after "apply," "save," or whatnot.
I have "start minimized" checked, but I hope to have that mean, "Start minimized on startup," and not start minimized every time I open the application.
VF Curve Tuner does not easily identify that it is actually working and doing something. Poor GUI.
Have you tried doing a power flush to see if that will get your three fans back? Happened once to me a few versions ago, did that and have had all three since. Power down PC, unplug power supply and hold power button in for 30 seconds, plug back in and boot back up.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
DisplacerGoat
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/10/11 15:53:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 17:58:49
(permalink)
Nope. Power flush didn't help. Thanks for the suggestion though.
That said, on the last iteration, some startups would show three fans, but most showed only two fans. It's too early to tell on this iteration.
Intel i7-8700K @ 5.2 Ghz Asus ROG Maximus X Apex EVGA 2080 TI FTW3 2x 16 GB G. Skill F4-3000C14 2x Samsung 960 Pro 1 TB m.2 EVGA Supernova 1300 G2
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 18:15:40
(permalink)
d.burnette
DisplacerGoat
Good:
Application icon load is much faster (~1 sec instead of ~15 seconds to open).
Setup settings appear to remain saved after restart.
Bad:
GUI still shows two fans instead of three.
LED does not illuminate after "apply," "save," or whatnot.
I have "start minimized" checked, but I hope to have that mean, "Start minimized on startup," and not start minimized every time I open the application.
VF Curve Tuner does not easily identify that it is actually working and doing something. Poor GUI.
Have you tried doing a power flush to see if that will get your three fans back?
Happened once to me a few versions ago, did that and have had all three since.
Power down PC, unplug power supply and hold power button in for 30 seconds, plug back in and boot back up.
+1 Remember to turn Windows 10 Fast Startup OFF, when upgrading drivers, firmware or hardware  Windows Central - How to disable Windows 10 fast startup (and why you'd want to)
|
DisplacerGoat
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/10/11 15:53:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 18:21:05
(permalink)
I don't have fast startup enabled at any time.
Intel i7-8700K @ 5.2 Ghz Asus ROG Maximus X Apex EVGA 2080 TI FTW3 2x 16 GB G. Skill F4-3000C14 2x Samsung 960 Pro 1 TB m.2 EVGA Supernova 1300 G2
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/15 20:31:18
(permalink)
So on Start with OS the LED Color Box is missing and my card names are incorrect.
But if I exit and the start PX1 all is fine. Now to test this on this Beta Version.
|
Frammish
Superclocked Member
- Total Posts : 236
- Reward points : 0
- Joined: 2014/10/18 15:24:44
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 11:54:17
(permalink)
0.3.7.0 now saves fan curves, memory clock, and led colors, but does not save the target power and gpu temp values properly.
I break the link and leave power at 100% but limit GPU temp to 75. When I restart my computer (fast start disabled), it remembers the GPU temp of 75 but does not remember they are unlinked and then caps power to 68%. It needs to remember the unlink and the power setting.
|
Frammish
Superclocked Member
- Total Posts : 236
- Reward points : 0
- Joined: 2014/10/18 15:24:44
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 12:01:03
(permalink)
0.3.7.0 VF Curve Tuner won’t run without restarting the software. It still locks up my system and cannot complete a scan. It used to work properly.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 12:07:47
(permalink)
I stopped loading PX1 with OS as it shows all features if I start PX1 after the OS us booted up.
|
DisplacerGoat
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/10/11 15:53:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 12:53:50
(permalink)
I had VF Curve Tuner lock on me also. Similar, restarting the software allowed me to use it.
It would be nice to know if it was running and how much it has completed at a glance...
Intel i7-8700K @ 5.2 Ghz Asus ROG Maximus X Apex EVGA 2080 TI FTW3 2x 16 GB G. Skill F4-3000C14 2x Samsung 960 Pro 1 TB m.2 EVGA Supernova 1300 G2
|
lezus123
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2018/11/16 10:55:26
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 16:44:33
(permalink)
DON'T INSTALL THIS SOFTWARE IF YOU HAVE A 2080 TI FTW3
This software made my fans run at 100% speed and turned on three red leds.
i9 9900K @ 5.1 GHzAsus Maximus Hero XIHOF Hall Of Fame 16GB (2x8GB) @ 4000 MhzEVGA GeForce RTX 2080 Ti FTW3 ULTRA GAMINGAsus Xonar Essence STX IILepa G1000M
|
DisplacerGoat
New Member
- Total Posts : 38
- Reward points : 0
- Joined: 2018/10/11 15:53:54
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/16 17:46:04
(permalink)
lezus123
DON'T INSTALL THIS SOFTWARE IF YOU HAVE A 2080 TI FTW3
This software made my fans run at 100% speed and turned on three red leds.
Awful experiences here also... I have no idea if this software broke my card or if my card is broken upon receipt.
Intel i7-8700K @ 5.2 Ghz Asus ROG Maximus X Apex EVGA 2080 TI FTW3 2x 16 GB G. Skill F4-3000C14 2x Samsung 960 Pro 1 TB m.2 EVGA Supernova 1300 G2
|
spikerules
Superclocked Member
- Total Posts : 139
- Reward points : 0
- Joined: 2013/02/07 02:01:14
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/17 03:29:41
(permalink)
Just to let you guys know that’s I’ve had major issues with the last two updates. Finally the fan curves save, but at the expense of a weird bug whereby the performance of my card will decrease massively with every subsequent game or bench I run.
With the 1st bench I get the correct result and then the next bench decreases by 1500 points on timespy! The next by 100 and so on...
I had to delete X1 and install Afterburner. Now everything is fine and as it should be. In fact I don’t have to put as much OC into my memory or GPU to get the same result.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/17 07:17:36
(permalink)
Just to mention this again as it still exists in 0.3.7.
VR - with my Oculus Rift, upon putting on the headset and the Oculus Home software launching, Precision X1 closes.
Bad time for that to happen, if VR user does not remove or lift headset again before launching a game, they will not know this has happened.
Normally putting the headset on is the last thing a VR user does prior to launching the game.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
greg.demaria
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2012/07/09 08:42:31
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/17 10:51:08
(permalink)
So, I upgraded to an EVGA RTX 2080 Ti XC Ultra from my trusty old Asus ROG STRiX 1080 a couple weeks ago and I'm used to using MSI Afterburner to OC my GPUs, but since I heard Precision X1 was re-made from the ground up with new code I thought I'd give it a try. I understand how everything in PX1 works so far, except how saving and loading profiles works. I don't understand why sometimes you click on one of the profile numbers in the right-side menu bar (1-9) and the whole box turns purple, and sometimes you click the profile box and only the number turns purple, then there's this business with the double-clicking the number boxes and right-clicking the number boxes, I have no clue what any of that does. Can anyone help me understand how to simply assign my profile values to Profile 0, save Profile 0, and then Load Profile 0 after closing the app or restarting my PC? Because right now it appears that I can only save one profile settings/set of values for all of the Profiles 0-9, they are always the same values/settings as Profile 0. I tried making Profile 0 my basic/least powerful OC settings, with Profile 1 being slightly more OC, 2 even higher OC, etc... But this is so confusing as to how to properly save each profile, load it later, and apply it. Any help would be greatly appreciated! Btw, I'm posting this here because I'm running this version of PX1 (0.3.7 BETA). Thanks!
|
squall-leonhart
CLASSIFIED Member
- Total Posts : 2904
- Reward points : 0
- Joined: 2009/07/27 19:57:03
- Location: Australia
- Status: offline
- Ribbons : 24
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/17 23:10:35
(permalink)
Cool GTX
d.burnette
DisplacerGoat
Good:
Application icon load is much faster (~1 sec instead of ~15 seconds to open).
Setup settings appear to remain saved after restart.
Bad:
GUI still shows two fans instead of three.
LED does not illuminate after "apply," "save," or whatnot.
I have "start minimized" checked, but I hope to have that mean, "Start minimized on startup," and not start minimized every time I open the application.
VF Curve Tuner does not easily identify that it is actually working and doing something. Poor GUI.
Have you tried doing a power flush to see if that will get your three fans back?
Happened once to me a few versions ago, did that and have had all three since.
Power down PC, unplug power supply and hold power button in for 30 seconds, plug back in and boot back up.
+1
Remember to turn Windows 10 Fast Startup OFF, when upgrading drivers, firmware or hardware
Windows Central - How to disable Windows 10 fast startup (and why you'd want to)
Theres no point to this, the only real time to do this is when switching a cpu out where it has the same product family and sku number. the current kernel state is backed up, not the startup state.
CPU:Intel Xeon x5690 @ 4.2Ghz, Mainboard:Asus Rampage III Extreme, Memory:48GB Corsair Vengeance LP 1600
Video:EVGA Geforce GTX 1080 Founders Edition, NVidia Geforce GTX 1060 Founders Edition
Monitor:BenQ G2400WD, BenQ BL2211, Sound:Creative XFI Titanium Fatal1ty Pro
SDD:Crucial MX300 275, Crucial MX300 525, Crucial MX300 1000
HDD:500GB Spinpoint F3, 1TB WD Black, 2TB WD Red, 1TB WD Black
Case:NZXT Phantom 820, PSU:Seasonic X-850, OS:Windows 7 SP1
Cooler: ThermalRight Silver Arrow IB-E Extreme
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 03:28:12
(permalink)
greg.demaria
So, I upgraded to an EVGA RTX 2080 Ti XC Ultra from my trusty old Asus ROG STRiX 1080 a couple weeks ago and I'm used to using MSI Afterburner to OC my GPUs, but since I heard Precision X1 was re-made from the ground up with new code I thought I'd give it a try. I understand how everything in PX1 works so far, except how saving and loading profiles works. I don't understand why sometimes you click on one of the profile numbers in the right-side menu bar (1-9) and the whole box turns purple, and sometimes you click the profile box and only the number turns purple, then there's this business with the double-clicking the number boxes and right-clicking the number boxes, I have no clue what any of that does. Can anyone help me understand how to simply assign my profile values to Profile 0, save Profile 0, and then Load Profile 0 after closing the app or restarting my PC? Because right now it appears that I can only save one profile settings/set of values for all of the Profiles 0-9, they are always the same values/settings as Profile 0. I tried making Profile 0 my basic/least powerful OC settings, with Profile 1 being slightly more OC, 2 even higher OC, etc... But this is so confusing as to how to properly save each profile, load it later, and apply it. Any help would be greatly appreciated! Btw, I'm posting this here because I'm running this version of PX1 (0.3.7 BETA). Thanks!
I will tell you how I save a profile that works for me. In PX1, I make my adjustments. Which in my case is Power and Temp target sliders on full. Manual fan curve activated (check box selected) and then a custom fan curve created. I like a little more aggressive fan curve for all three of my fans than the default. Once I have the above, I left click on a profile number (which turns the box purple), and then I click the Save button. Once saved, if I select another box, the profile number will be a purple reflecting there is a profile saved there. After that, whenever I want to load up my profile like after closing PX1 for a time being, or restarting the PC - I left click the profile number to select it, and then clock on the Load button. No need to click on either apply or save after loading the profile, only need to click the Load button. Hope this helps,
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 07:55:03
(permalink)
Well i just installed the new version and the px1 won't even start. Uninstalled it deleted all the evga folders and did a disk cleanup, then rebooted the computer reinstalled the newest version and nothing. I looked in my installed programs and led sync and px1 are both installed but program wont start even as an administrator. I have 2x 2080ti ftw3 cards.
|
kacan22
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2017/07/13 20:36:08
- Location: Europe
- Status: offline
- Ribbons : 2
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 08:36:24
(permalink)
dwexpress
Well i just installed the new version and the px1 won't even start. Uninstalled it deleted all the evga folders and did a disk cleanup, then rebooted the computer reinstalled the newest version and nothing. I looked in my installed programs and led sync and px1 are both installed but program wont start even as an administrator. I have 2x 2080ti ftw3 cards.
probably crashing go to %appdata% local crashdump files probably full of PX1 delete them, and btw delete PX1 folder in %appdata%local. Install again and it will work
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 13:27:34
(permalink)
I'm not even finding that file/folder in my system.
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 13:45:23
(permalink)
dwexpress
I'm not even finding that file/folder in my system.
Users/appdata/local/CrashDumps You may have to enable "show hidden files and folders".
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 15:59:42
(permalink)
OK, did it, found it, reinstalled and still same problem. It installs with no errors but won't open.
|
felipy2k
New Member
- Total Posts : 24
- Reward points : 0
- Joined: 2010/12/17 17:29:11
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 16:42:04
(permalink)
this one give me +47 on scan, while the previous gave me almost 150 thats weird!
|
d.burnette
CLASSIFIED ULTRA Member
- Total Posts : 5496
- Reward points : 0
- Joined: 2007/03/08 13:19:32
- Status: offline
- Ribbons : 17
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/18 16:49:21
(permalink)
felipy2k
this one give me +47 on scan, while the previous gave me almost 150 thats weird!
Depends on the silicon. Can certainly vary card to card.
Don EVGA Z390 Dark MB | i9 9900k CPU @ 5.2 GHz all cores | EVGA RTX 3090 FTW3 Ultra | 32 GB G Skill Trident Z 3200 MHz CL14 DDR4 Ram | Corsair H150i Pro Cooler | EVGA T2 Titanium 1000w Power Supply | Samsung 970 Pro 1TB m.2 Nvme | Samsung 970 Evo 1TB m.2 Nvme | Samsung 860 Evo 1TB SATA SSD | EVGA DG 87 Case |
|
Surprise42MF
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 2018/11/14 11:21:16
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/19 04:24:33
(permalink)
PX1 0.3.7 make stuttering too, EVGA what are you doing ???
post edited by Surprise42MF - 2018/11/19 04:59:51
|
sparetimepc
CLASSIFIED Member
- Total Posts : 2413
- Reward points : 0
- Joined: 2009/11/13 09:24:09
- Location: Altona, IL
- Status: offline
- Ribbons : 27
Re: EVGA Precision X1 0.3.7 BETA (RTX Only)
2018/11/19 04:35:27
(permalink)
Yeah i can't get the newest version to work, it installed fine and said the firmware update was succesful but i can't even get the program to open now, another dud version it looks like.
|