EVGA

Helpful ReplyHot!EVGA wants feedback on DG-7 Case

Page: < 12345 Showing page 5 of 5
Author
SystemsOgreLoad
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2015/08/13 22:51:05
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/25 18:28:55 (permalink)
Honestly this case looks fantastic, though I would prefer a mini-itx case. If the size was smaller and could still fit a hybrid card, I'm sold
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/26 04:28:41 (permalink)
SystemsOgreLoad
Honestly this case looks fantastic, though I would prefer a mini-itx case. If the size was smaller and could still fit a hybrid card, I'm sold



Let's just hope in a near future they release a updated version of the Hadron Series.

Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


SystemsOgreLoad
Superclocked Member
  • Total Posts : 105
  • Reward points : 0
  • Joined: 2015/08/13 22:51:05
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/26 10:17:32 (permalink)
PietroBR
SystemsOgreLoad
Honestly this case looks fantastic, though I would prefer a mini-itx case. If the size was smaller and could still fit a hybrid card, I'm sold



Let's just hope in a near future they release a updated version of the Hadron Series.




That would be awesome. Might be willing to let go of my Inwin 901 if they do
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/27 04:24:49 (permalink)
SystemsOgreLoad
PietroBR
SystemsOgreLoad
Honestly this case looks fantastic, though I would prefer a mini-itx case. If the size was smaller and could still fit a hybrid card, I'm sold



Let's just hope in a near future they release a updated version of the Hadron Series.




That would be awesome. Might be willing to let go of my Inwin 901 if they do



Yup
I don't want to use my HAF X anymore if I need to go for a Lan Party. 
But the Hadron Series, they are just almost perfect (they were awesome by the time it was launched, but as new technology appears, updates must be made)
IMO, I would make a few changes on a new version:
 
- 280mm TOP and FRONT (for CLC 280 support and others radiators);
- 140mm/120mm back fan (for exhaust hot air and add the possibility to fit the radiator from a Hybrid Card);
- Front I/O with USB 3.0 / Power / Reset only (maybe a SD/MicroSD reader just for suggestion). No need for the audio/mic entrance in the front (most people will use the one in the MOBO, since it's usually better);
- Allow storage for 2 SSD + 1 HDD (would be enought for a mITX Build, not to say the M.2 support from the board itself);
- Removable SSD/HDD bracketsm for those that would like to not use it, and have more room on the chassis;
- Make enought room to fit the FTW3 (lenght and width);
- If it comes with a PSU on it, as before, make it a 700w PSU, so we wouldn't have any problem running newest hardware;
- (This one I can only dream) Modular PSU. This would make cable manage SO MUCH EASY in a mITX case like the Hadron;
 
Well. I think, from my part, that's it. That was all I would make for update a new Hadron Series.

Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


zwalker2
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2017/06/07 19:20:36
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/27 10:59:07 (permalink)
Any update on the release yet? I feel like its been forever since they said they would "release it soon"
 
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/07/27 16:59:09 (permalink)
zwalker2
Any update on the release yet? I feel like its been forever since they said they would "release it soon"
 



Who knows. I think somewhere by next month or even september we might have some news.


EVGATech_BrandonS
Quarter 3 would be July 1 to September 30.



Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


CBreeze5g
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2017/07/30 17:52:56
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/03 06:06:29 (permalink)
I hope we get more news about this case soon I really like sleek looks, and if I like the features this has a good chance of being my next case.
EvilUrges18
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2017/03/29 17:25:39
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/04 09:53:24 (permalink)
When I called them around Computex time they said the DG-7 would be out by July.
Then on a livestream at the end of June when I asked on Twitch they said mid July possibly August.
Someone else asked on the livestream a few weeks ago and Jacob had no update.
Total bummer, I have a stack badass of components sitting, waiting to live in this case.
Might just wind up having to build in a p400s... or if EVGA takes too long then one of the new CoolerMaster cases dropping in Sept.
HobotiX
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2016/07/19 08:19:27
  • Location: Oregon
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/04 17:12:46 (permalink)
I really like the design. Only things that would be nice is a vertical GPU attachment option and good airflow. 
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/05 04:14:12 (permalink)
HobotiX
I really like the design. Only things that would be nice is a vertical GPU attachment option and good airflow. 



Rolling back a few pages:
 
PietroBR
Update:

Looks like we will be able to mount the card vertically via riser cables (nice move EVGA, very nice move indeed)



 
Source: https://www.inet.se/nyhet./1119/computex-2017-evga

 
EvilUrges18
When I called them around Computex time they said the DG-7 would be out by July.
Then on a livestream at the end of June when I asked on Twitch they said mid July possibly August.
Someone else asked on the livestream a few weeks ago and Jacob had no update.
Total bummer, I have a stack badass of components sitting, waiting to live in this case.
Might just wind up having to build in a p400s... or if EVGA takes too long then one of the new CoolerMaster cases dropping in Sept.



unfornutally, I think there was never a confirmation, only expectation.
If I were to say, this are going to show up by the end of August all the way along September.



Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


Cruzix
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2017/07/04 07:28:49
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/06 01:36:19 (permalink)
Last stream they said that we'll be getting updates regarding the DG-7 series in the start September @ PAX.
 
Here's a VoD: https://clips.twitch.tv/G...liciousCattleFUNgineer
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/07 05:13:38 (permalink)
Cruzix
Last stream they said that we'll be getting updates regarding the DG-7 series in the start September @ PAX.
 
Here's a VoD: https://clips.twitch.tv/G...liciousCattleFUNgineer


 
Thanks for the info Cruzix.
This might contain the nerves in this topic for awhile .

Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


Aluken21
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2017/07/30 09:54:00
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/10 08:31:16 (permalink)
Remove the most noticeable branding, I love evga but the side and front branding are a little too much
miscbyproduct
New Member
  • Total Posts : 99
  • Reward points : 0
  • Joined: 2016/05/27 04:05:04
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/11 03:24:32 (permalink)
will be a pretty long time before I will buy any case that doesn't support dvd
 
when i made my recent full tower purchase i cm to the conclusion, didn't mater MUCH which I bought, i was going to end up rebuilding it
so i went  with the cheapest that supported all the various mounting types.
 
and that left out this evga model
 
 
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/11 04:44:39 (permalink)
miscbyproduct
will be a pretty long time before I will buy any case that doesn't support dvd
 
when i made my recent full tower purchase i cm to the conclusion, didn't mater MUCH which I bought, i was going to end up rebuilding it
so i went  with the cheapest that supported all the various mounting types.
 
and that left out this evga model
 
 



They said in the live stream that a few tweaks were made.
Who knows if they didn't allowed a removable 5.25" bay.
Will need to wait until September to have some concrete news.

Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


miscbyproduct
New Member
  • Total Posts : 99
  • Reward points : 0
  • Joined: 2016/05/27 04:05:04
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/11 05:30:59 (permalink)
I only mentioned that in the hopes evga would come to understand,
ppl still have cd & dvd's, and will have for several yrs to come.
 
People aren't throwing them away over pc case choice.
 
and there are still other bay mount perif to be considered
 
 
post edited by miscbyproduct - 2017/08/11 05:32:23
Cruzix
New Member
  • Total Posts : 51
  • Reward points : 0
  • Joined: 2017/07/04 07:28:49
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/13 09:21:26 (permalink)
miscbyproduct
I only mentioned that in the hopes evga would come to understand,
ppl still have cd & dvd's, and will have for several yrs to come.
 
People aren't throwing them away over pc case choice.
 
and there are still other bay mount perif to be considered
 

Sure people still use them (rarely) however it completely ruins the aesthetics of the front + limits the airflow. So why should that be implemented into the case when you can just have a external optical drive and plug it in whenever u rarely need it. That seems so much more better since optical drives more or less ARE dead.
Vlada011
Omnipotent Enthusiast
  • Total Posts : 8327
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: online
  • Ribbons : 9
Re: EVGA wants feedback on DG-7 Case 2017/08/13 11:17:33 (permalink)
5.25" drive is not necessary.
All motherboards arrive with tones of USB 3.0 connectors and they should be used.
I keep everything on mobo, charger for cell phone, charge electronic cigarrete, DVD-RW, external HDD,...
Anyway now is attractive Ultra HD Blue ray 4K with USB 3.0 connector,
 
I have DVD-RW bay 4 devices, I would rather cut him completely with dreamel and left space for radiator.
Look so bad and old fashioned compare to new cases.
Now is chance for everyone to throw away their optical drive.
It's weird that Panasonic still make optical drive UHD Blue Ray
 




caligrown1985
New Member
  • Total Posts : 22
  • Reward points : 0
  • Joined: 2017/07/14 12:44:44
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/16 09:01:54 (permalink)
2x 420 radiator support
Rand pump mount options
Graphic card sagging bracket
USB 3.1(or 3.0) with 1 USB Type C and 1 or 2 Type A on the front panel
Cut out on the bottom of the motherboard for those headers(DG-87 didn't have this and I had to rout the cables all the way from the bottom of the case)
Full EATX support
 




EVGA_AndyL
Solutions Manager
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2017/06/27 09:34:52
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/16 10:50:01 (permalink)
twitchyzero
seriously still no release date? Computex was 2 months ago.
 
Is there a way to turn off the EVGA logos lighting on the 76 and 77?
I'm most interested in the DG-75..does it support vertical GPU mount too? 

I'm most interested to learn about the dimensions...


EVGA Logo lighting can be turned off. The entire DG7 line will support vertical GPU mount.
PietroBR
iCX Member
  • Total Posts : 296
  • Reward points : 0
  • Joined: 2013/09/14 06:40:52
  • Location: Brazil
  • Status: offline
  • Ribbons : 0
Re: EVGA wants feedback on DG-7 Case 2017/08/17 04:45:12 (permalink)
caligrown1985
2x 420 radiator support
Rand pump mount options
Graphic card sagging bracket
USB 3.1(or 3.0) with 1 USB Type C and 1 or 2 Type A on the front panel
Cut out on the bottom of the motherboard for those headers(DG-87 didn't have this and I had to rout the cables all the way from the bottom of the case)
Full EATX support

 
- At this point they most probably are not going to make big changes to the case (unless they delay it).
- Radiator support will be 1 360mm + 1 280mm (1 120mm can be mounted on the back of the case, for exiting the hot air).
- I'm not sure, but I think the DG7 series will be Custom Watercooling friendly. So most probably it will be possible to fit reservoir/pumps on the side of the motherboard.
- Graphic card sagging bracket would be cool (doubt this will come with the board, but they might just sell it later).
- Don't know abou the features on the front of the case, but by the pictures, if it follows what was posted in their article page, we will have 2 USB 3.0, Audio and Mic Jack (unnecessary IMO), K-Boost (don't even know if someone use this feature).
- Looks like there will be a cut out on the PSU cover for easy cable management at the botton of the motherboard (Look at the quote down here).
- EATX will not be possible because of the PSU cover.
 
PietroBR
Update:

Looks like we will be able to mount the card vertically via riser cables (nice move EVGA, very nice move indeed)



 
Source: https://www.inet.se/nyhet./1119/computex-2017-evga

post edited by PietroBR - 2017/08/17 04:46:15

Case: C.M. HAF X (No Drive Bays mod)
MB: Asus Rampage IV GENE
CPU: Intel I7 3820 (No O.C)
Mem.: 1600Mhz 16GB (4X4) Corsair DDR3 VENGEANCE PRO (RED)
GPU: GTX 1080TI FTW3
A.I.O. W.C: Corsair H100I V1
PSU: Corsair HX1050


Page: < 12345 Showing page 5 of 5
Jump to:
  • Back to Mobile