hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Hi Team, Thanks for taking the time to check this out and possibly help. I recently purchased my first real desktop gaming system. I will boot the system up for the first time to find the digital display read a code 04. the computer starts up and runs just fine, but after a few minutes it will force restart. so far when it does this it always boots back up with the code A0 and runs fine from then on. I guess that is really the only thing really bothering me about this system. I am wondering about one thing, I hear the digital display should have a cpu temp read out? I have never seen this, it is always either 04 to start - reboot - them A0. Thank you in advance for any information / help you can provide. I am running the following equipment in this build. - CPU: Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155
- Motherboard: EVGA Z77 FTW
- Graphics Card: EVGA 1070 SC
- Power Supply: Professional Series™ Gold AX1200 — 80 PLUS® Gold Certified Fully-Modular Power Supply
- Hard drive: Intel 530 Solid State Drive Retail Kit 120gb ( I have a 1TB SSD ordered on amazon coming soon)
- Cooling: Hydro Series™ H100i Extreme Performance CPU Cooler & 5 Fan Set up
- System Memory: Kingston KVT8FP-HYC 16gb ddr3 1600mhz 99.99
- Operating System: Windows 10 x64
- Bios Version E699 1.22 x64 3/07/2013 (should be the latest version)
|
Thorbans
New Member
- Total Posts : 82
- Reward points : 0
- Joined: 2009/12/28 15:24:22
- Status: offline
- Ribbons : 1
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/02 10:15:35
(permalink)
This will sound crazy but double check your power button I had this trouble before and my start up power button would stick pushed in and it would do what you are talking about. I hope it helps you. It might not but might be worth a shot.
T
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/02 12:47:59
(permalink)
Does this issue occur when booting the system with just the essentials?
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/02 12:57:35
(permalink)
@ Thorbans, I did check the power button. this is not the issue.
@ Sajin, I'm not sure if this will be the right answer to your question, but I only have the one sdd drive with a fresh copy of windows 10. the only thing on the pc at the moment are the bios, and drivers for the equipment.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/02 13:40:48
(permalink)
Try booting the system with just the cpu, ssd, 1 stick of ram, mouse and keyboard only.
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 06:30:44
(permalink)
I did like you said.i removed 3 memory sticks from right to left. removed the gpu,and wireless card,all harddrives but the os. crunk it up and it is showing what im thinking is the temp dispay now.
it stays at 47 but will flux slightly to 46 and once or twice went to 50 51. it ran for about 5 minutes then force reset.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 06:43:28
(permalink)
Hmm. Have you tried to clear the cmos?
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 06:55:00
(permalink)
i have a time or two with the gear all installed. after the force reboot, it has been sitting here stable. i will clear it again and see what happens.
|
wmmills
CLASSIFIED ULTRA Member
- Total Posts : 5679
- Reward points : 0
- Joined: 2006/01/04 20:47:29
- Location: New Jersey
- Status: offline
- Ribbons : 40
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 07:20:14
(permalink)
I know whats going on...... when you first boot the system it will boot to the post screen and then reboot itself right after, correct? Its supposed to do that double boot when its running all auto settings in the bios to sense the proper voltages and ram timings etc..... That's also why its crashing once you made it to desktop. You need to reboot, go into the bios manually and input the correct vcore voltage for your cpu, correct timings, voltage and command rate of 2 for your ram at the very least, then save and reboot. You can reboot and go back into the bios and setupo the rest of the parameters once you have it somewhat stable. Auto settings, especially on the better boards meant for overclocking, aren't too good to use for everyday stability. They will get you booted but they are really meant to be manually setup.
MOBO: EVGA x299 Dark, CPU: I9 10900X, RAM: Patriot Viper RGB 3600 32gb, SSD: Samsung 860 EVO 1TB, M2: Samsung 970 EVO+ 1TB, PSU: CoolerMaster M2 1500, CPU HSF: EVGA 240 CLC HSF~ P/P EK Furious Vardar, G-CARD:EVGA RTX3090 FTW3 Ultra Gaming w/Hybrid kit and Noctua IPPC 3000 P/P, CASE: LIAN-LI PC-V2010B w/ Window mod, OS: Windows 10 Pro 64bit, MON: Alienware AW3821DW  New EVGA product? Register it NOW with this link: http://www.evga.com/register/default.asp?affiliatecode=4QFQRAMOII Help Our Vets From K-2! [link=https://strongholdfreedom
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 07:36:24
(permalink)
Thanks man that deff makes alot of sense from what its doing. This is my first gaming rig. i purchased it used from a fellow who reset the windows and only installed the drivers. so i guess this will be the next step to making it stable. any idea if there is i guide to make this a little less painfull for someone with little exp?
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 07:58:13
(permalink)
Code 04 in this type of bios is normally a memory refresh. Go into the bios like said above and put in the correct timings and voltage to the ram. While you are in there, take a look at CPU temp to make sure it's normal.
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 07:59:27
(permalink)
https://forums.evga.com/E...ng-Guide-m1611217.aspx Overclocking guide I still have my z77 and run it still today. I can look at my clocks and voltages when I get home and see what I'm running. I think either 4 or 4.2 ghz daily. Waiting to upgrade to a new board in a few weeks. Board still has a lot of life in it and also, this board was quirky to get a good stable clock. Some of the bus speeds had holes in them that would make stability problems. stock, no problems but you had to work for higher overclocks.
post edited by Delirious - 2019/01/03 08:03:59
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 08:17:33
(permalink)
Double boot taking 5 minutes? Should take seconds not minutes.
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 08:22:58
(permalink)
that would be great. I cant really find a spec sheet for the memory. i tried to go to kingston and find specs from their site but they dont have this one. any idea there? I guess my biggest worry is just getting it to stop force rebooting on me.
this is the memory installed x4 KVT8FP-HYC Kingston 4GB DDR3 ECC PC3-12800 1600Mhz 2Rx8 Memory
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 10:07:40
(permalink)
hockinsonjohn
that would be great. I cant really find a spec sheet for the memory. i tried to go to kingston and find specs from their site but they dont have this one. any idea there? I guess my biggest worry is just getting it to stop force rebooting on me.
this is the memory installed x4 KVT8FP-HYC Kingston 4GB DDR3 ECC PC3-12800 1600Mhz 2Rx8 Memory
Kingston KVT8FP- HYC Server Memory 4GB DDR3 1600MHz PC3-12800 240-Pin Dual Rank ECC Unbuffered DIMM CL11 SDRAM RAM. Your MB cannot support ECC Memory. https://www.evga.com/support/motherboard/legacy/ Kingston KHX2800C12D3T1K2/4GX G.SKILL F3-17600CL7D-4GBPIS 2GB G.SKILL F3-17066CL9D-4GBTDS 2GB G.SKILL F3-17066CL9T-6GBTD 2GB G.Skill F3-2133C9Q-32GZH G Skill F3-17000CL11Q-16GBZL 4GB Kingston KHX21C11T1BK2/8X 4GB Kingston KHX21C11T1BK2/16X 8GB Kingston KHX2133C9AD3X2K2/4GX 4GB ADATA AX3U2000GC2G9B-3G 2GB CORSAIR TR3X6G2000C8GT 2GB G.SKILL F3-16000CL6T-6GBPID 2GB G.SKILL F3-16000CL9T-6GBTD 2GB G.SKILL F3-16000CL9D-4GBTD 2GB OCZ OCZ3B2000LV6GK 2GB OCZ OCZ3N2000SR2GK 1GB CORSAIR CMD16GX3M4A1866C9 4GB Kingston KHX1866C9D3K2/8GX 4GB OCZ OCZ3RPR1866C9LV6GK 2GB CORSAIR CM3X1024-1800C7D 1GB CORSAIR CM3X1024-1800C7DIN 1GB CORSAIR CM3X1G1600C8D4 1GB CORSAIR CMG4GX3M2A1600C7 2GB CORSAIR CMD8GX3M2A1600C8/4G CORSAIR CMD8GX3M2A1600C9/4G CORSAIR CMD16GX3M2A1600C9/8G G.SKILL F3-12800CL9D-4GBECO 2GB Kingston KHX1600C10D3B1K2/16G 8GB Kingston KHX1600C10D3B1K2 4GB Kingston KHX16C9K2/16 8GB SUPER TALENT WP160UX4G9 2GB G.SKILL F3-10666CL8D-4GBECO 2GB Kingston KVR1333D3E9S/8G 8GB https://www.corsair.com/us/en/Categories/Products/Memory/High-Performance-Memory/Vengeance%C2%AE-%E2%80%94-4GB-Single-Module-DDR3-Memory-Kit/p/CMZ4GX3M1A1600C9 https://www.corsair.com/us/en/Categories/Products/Memory/High-Performance-Memory/Vengeance%C2%AE-%E2%80%94-4GB-Single-Module-DDR3-Memory-Kit/p/CMZ4GX3M1A1600C9B
post edited by bcavnaugh - 2019/01/03 10:28:12
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 10:29:33
(permalink)
oh wow. so this memory is wrong?
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 11:12:16
(permalink)
I went ahead and ordered this set. should have it by the 9th. it has all the spec i think we need to set it up
DOMINATOR® PLATINUM — 16GB (4 x 4GB) DDR3 DRAM 1866MHz C9 Memory Kit
LED Lighting
WHITE
SPD Latency
9-9-9-24
SPD Speed
1333MHz
SPD Voltage
1.5V
Speed Rating
PC3-15000 (1866MHz)
Compatibility
Intel Z77,Intel X79,Intel Z68,Intel P67
Heat Spreader
DHX
Package Memory Format
DIMM
Performance Profile
XMP 1.3
Package Memory Pin
240
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 11:17:43
(permalink)
hockinsonjohn
oh wow. so this memory is wrong?
Sadly yes, none of the EVGA Motherboards support ECC Memory hockinsonjohn
I went ahead and ordered this set. should have it by the 9th. it has all the spec i think we need to set it up
DOMINATOR® PLATINUM — 16GB (4 x 4GB) DDR3 DRAM 1866MHz C9 Memory Kit
LED Lighting
WHITE
SPD Latency
9-9-9-24
SPD Speed
1333MHz
SPD Voltage
1.5V
Speed Rating
PC3-15000 (1866MHz)
Compatibility
Intel Z77,Intel X79,Intel Z68,Intel P67
Heat Spreader
DHX
Package Memory Format
DIMM
Performance Profile
XMP 1.3
Package Memory Pin
240
What Part Number?
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:03:58
(permalink)
I got the CMD16GX3M4A1866C9 that i saw in the list. i found a really good deal at 129 for 4 sticks
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:15:40
(permalink)
hockinsonjohn
I got the CMD16GX3M4A1866C9 that i saw in the list. i found a really good deal at 129 for 4 sticks
Nice Price as well  I paid $300 for mine back then that is.
post edited by bcavnaugh - 2019/01/03 12:17:58
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:18:54
(permalink)
Thank you guys all so much for all your current help. when all the new goodies get here ill post back for the next steps.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: online
- Ribbons : 199
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:39:09
(permalink)
At least the motherboard was able to disable the ecc features and allow the system to run with ecc memory.
post edited by Sajin - 2019/01/03 12:41:14
|
bob16314
Omnipotent Enthusiast
- Total Posts : 8048
- Reward points : 0
- Joined: 2008/11/07 22:33:22
- Location: Planet of the Babes
- Status: offline
- Ribbons : 761
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:54:31
(permalink)
Just be aware that the SPD (Serial Presence Detect) speed that programmed into the RAM's onboard SPD chip is normally lower and slower the the RAM's full rated voltage speed and and timings, which gives boot compatibility across different platforms/motherboards..That voltage, speed, timing and command rate is what's used when those settings are on [Auto] in the BIOS.
To run the RAM at full rated speed it's often necessary to manually set the speed, timing, voltage and command rate to the mfgr's specs, or use an X.M.P. profile.
RAM can have different X.M.P. profiles to choose from, some of which may cause a no-boot situation..Make sure your mobo BIOS is up to date because some updates improve X.M.P. and RAM compatibility.
It's always best to set the RAM's speed, timing, voltage and command rate to the mfgr's specs in the BIOS.
* Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * "Whatever it takes, as long as it works" - Me
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:56:44
(permalink)
I feel i was pretty fortunate for the most part. everything seems to be working pretty good on this rig. it seems to run fine. i was running a laptop with a 1060 card. when i tried this out the other day on a game, i was pretty amazed with the quality difference. i can now see why everyone would rather a desktop for sure.
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/03 12:58:54
(permalink)
copy that Bob. the last time they put out a bios update for the other board was in 2013. I did make sure it was running the latest.
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/07 13:03:59
(permalink)
Hey Team,
I got my Corsair Memory in today. I think mabe I purchased to much not knowing. the ram says, 16gb, (4x4GB), 1866MHZ , 9-10-9-27, 1.50V
i got 4 sticks total, system would not boot with all 4 in the board. i took the two out from the black slots. I have the bios open and on the page that has basic timing configuration.
the memory is grayed out until turn memory frequency limiter from auto to 1867mhz ( should i choose this one or 1800?) it only has those two options and the ram says 1866.
im guessing after that i would go to
Basic Timing Configuration
tcl 9
trcd 10
trp 9
tras 27
after this i cant seem to find the voltage input. if i am correct with most of this, would i be missing anything else?
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/07 13:08:07
(permalink)
the above settings are what are on the ram sticks here is whats on the manufacture website
Fan Included
No
Memory Configuration
Dual / Quad Channel
Memory Series
DOMINATOR PLATINUM
Memory Type
DDR3
Memory Size
16GB Kit (4 x 4GB)
Tested Latency
9-10-9-27
Tested Voltage
1.5V
Tested Speed
1866MHz
LED Lighting
WHITE
SPD Latency
9-9-9-24
SPD Speed
1333MHz
SPD Voltage
1.5V
Speed Rating
PC3-15000 (1866MHz)
Compatibility
Intel Z77,Intel X79,Intel Z68,Intel P67
Heat Spreader
DHX
Package Memory Format
DIMM
Performance Profile
XMP 1.3
Package Memory Pin
240
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/07 13:45:00
(permalink)
hockinsonjohn
Hey Team,
I got my Corsair Memory in today. I think mabe I purchased to much not knowing. the ram says, 16gb, (4x4GB), 1866MHZ , 9-10-9-27, 1.50V
i got 4 sticks total, system would not boot with all 4 in the board. i took the two out from the black slots. I have the bios open and on the page that has basic timing configuration.
the memory is grayed out until turn memory frequency limiter from auto to 1867mhz ( should i choose this one or 1800?) it only has those two options and the ram says 1866.
im guessing after that i would go to
Basic Timing Configuration
tcl 9
trcd 10
trp 9
tras 27
after this i cant seem to find the voltage input. if i am correct with most of this, would i be missing anything else?
you can use 1800 (ddr 900). I put in the timings and put the memory on auto on mine. (don't know why but I haven't messed with it in years). just enter those timings into the respective places. Memory voltage is vdimm on the overclocking tab. set it to 1.5
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
hockinsonjohn
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2018/12/31 14:28:10
- Location: Austin Texas
- Status: offline
- Ribbons : 0
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/07 14:18:19
(permalink)
so i tried that then put in all for sticks to find it not booting up. I did try this thou and it seems to boot up on all 4. under performance memory profiles i choose xmp profile 1. this seems to be doing the trick and at least allowing me to boot up with all 4 ram sticks. it seems it auto set everything to DDR3-1867 9-10-9-27-1N-1.50V
post edited by hockinsonjohn - 2019/01/07 14:20:27
|
Delirious
EVGA Forum Moderator
- Total Posts : 17474
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: EVGA Z77 FTW Motherboard Help Needed
2019/01/07 14:29:38
(permalink)
Yes. XMP is ok. You're good to go
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|