Yes...those are acrylic tubing connectors...I bought a lot of extra tubes! hahaha

nateman_doo
yea, you aren't kidding. that is tight.  

Right in the center though...so awesome job sir!

Test fit of  CPU/MB reservoir and the two drain ports.

 

Vlada011
Primochill CTR Phase II, silver/black, look so good.
He is only for acrylic tube or work and with normal?

It does look great! It is tapped for any G1/4 type connection.
Let me know if you have any more questions :)

kbeaumont5
Test fit of  CPU/MB reservoir and the two drain ports.

Looking good , you mentioned in the previous post dual loop, just wondering what you are thinking in terms of setup, and are you planning on running different coolants to make the different loops more visible?

kbeaumont5

I did think about different colors.. One is going to be white for sure.. If the other one isn't also white.. Then I thought about either black (might get lost on the black. board), grey, or an bright blue or orange (doesn't match anything but might stand out against the black and white. Still unsure on that..

Yeah the board and cards and ram and basically everything is pretty dark lol, yeah an accent color is an option, if you go that route may be worth painting the fans to match the color you chose, grey is a good neutral option which can work with the build, or maybe just go with pastel white in one and pure distilled in the other, in either case looking good and looking forward to seeing it all setup.

stiltz85
I think I want to go orange and black, kind of like the FrozenCPU Air 540.

That will look great!

Definitely looks sharp, but you have blocks from nateman so i dont see your point 
The classy without the heatsink is pretty plain so any color will work with black/white, i think you should use the standard PC color code, red=faster, blue=colder, because of science  lol

Yeah I know the feeling, I do like how MSI is putting out some more yellow products, gigabyte has orange and green sometimes, but Red is everywhere and blue is also pretty bad, I went blue this time since my other one is red themed (AMD vs Intel/Nvidia), so basically colors that are available
White - Color 1; Pink - Possible; Red - Overdone; Orange - Possible; Yellow - Possible; Green - Possible; Blue - Possible; Purple - Possible; Black - Color 2;
If it was a more black build I would say try purple because that could be pretty sharp but with the more white theme green or orange are probably the one's that would work the best (my opinion at least), oh and gold/bronze/silver are also options, gold could work if its done well

That look nice! Can get hijack the thread for one discreet picture of the bridge... Please?

Any ETA on the Second Batch of the X99 Classified Water Blocks?

Hey guys not sure how many of will be effected by this and don't have confirmation on it but apparently frozencpu is shutdown
http://www.overclock.net/t/1540656/insider-frozencpu-shuts-its-doors
I got all of my parts for this build already but definitely could have affected me

SU11YBEAR
Hey guys not sure how many of will be effected by this and don't have confirmation on it but apparently frozencpu is shutdown
http://www.overclock.net/t/1540656/insider-frozencpu-shuts-its-doors
I got all of my parts for this build already but definitely could have affected me

This explains why I did not get my shipping email yet.

It is somewhat on subject considering every aspect of my watercooling build besides the x99 block comes from frozencpu.

SU11YBEAR
Hey guys not sure how many of will be effected by this and don't have confirmation on it but apparently frozencpu is shutdown
http://www.overclock.net/t/1540656/insider-frozencpu-shuts-its-doors
I got all of my parts for this build already but definitely could have affected me

WHAAA???!!  That stinks?!  I used to get everything from there.  They were in NY and I could get everything i ordered the next day.