TERMINATOR-T100
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2013/11/09 08:28:50
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/13 12:38:53
(permalink)
HELLO
EVGA X99M MICRO 2
SUPPORT MEMORY XMP PROFILE: 2800/3000/3200 MHZ ?
|
MDeckerM
FTW Member
- Total Posts : 1683
- Reward points : 0
- Joined: 2015/09/21 17:32:43
- Location: RwlRwlRwlRwl
- Status: offline
- Ribbons : 8
Re: EVGA X99 Micro2!
2015/12/13 13:25:41
(permalink)
TERMINATOR-T100
HELLO
EVGA X99M MICRO 2
SUPPORT MEMORY XMP PROFILE: 2800/3000/3200 MHZ ? Hello, all of our X99 motherboards support DDR4 memory speeds 3200MHz+. You may not be able to achieve these speeds without overclocking the processor however. If you would like to view our tested memory list you can do so at this link http://www.evga.com/support/motherboard/
|
drpower
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/12/08 12:07:34
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/14 03:31:55
(permalink)
Always boots to bios. I'm using a 950 pro m.2, it is the only storage drive in my PC. Reset defaults in bios, then enable m.2 save and reset and I get windows. Restarting the system I get windows. Power off, I get bios when power on. *Edit: With the help of an EVGA tech we narrowed it down to just a Bios setting. I will post the settings soon.
post edited by drpower - 2015/12/14 14:27:02
|
drpower
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/12/08 12:07:34
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/14 03:52:10
(permalink)
Also, I have an extra Micro 2 board in sealed package. If anyone wants to buy it before I send it back let me know. My original order got screwed up, and then out of the blue it arrived, so i have two and right now they are sold out.
|
cshum2
New Member
- Total Posts : 45
- Reward points : 0
- Joined: 2011/06/24 22:48:11
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/14 14:31:07
(permalink)
I want one but I don't live is US ... Is it ok to sell to me ?
|
drpower
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/12/08 12:07:34
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/14 14:47:39
(permalink)
My system is running great. I wish I would have gotten a bigger case though, the Evolv case with two extra 140mm fans in the ceiling is too loud.
post edited by drpower - 2016/01/03 09:57:12
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA X99 Micro2!
2015/12/14 14:52:18
(permalink)
drpower
We should ask EVGA. I bought it from Amazon.ca on Dec.4th and it gets delivered later today. I live in Victoria BC, where do you live? This is for a new in sealed box Micro 2 board
I wouldn't do that. Reason is, once a "second hand" gets a hold of a item whether its new or used, the Warranty by default on that item gets pushed to the date it was manufactured instead of the date of purchase. I found this out when I purchased my second GPU (used) for SLI. For example, if an item was shelved for a long time and someone bought it and than sold it, that time wasted on the shelf eatens up the warranty for any user but the original purchaser.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: EVGA X99 Micro2!
2015/12/14 15:04:19
(permalink)
Selling or making deals to sell outside of the market place is strictly prohibited.
ToS:
Buying/Selling/Trading - Buying, trading, or selling anywhere with the exception of the Marketplace is prohibited. EVGA Corporation is NOT RESPONSIBLE for any loss due to any sale or exchange of any item in the Marketplace. You can find the Marketplace here - link. If you cannot gain access to the Marketplace see here - link. The Marketplace TOS, which is an additional TOS for buying/selling/trading, can be found here - link (can be viewed once access to the marketplace is granted.)
To get in to the market place, you must have 50 posts and the request permission to join the marketplace.
|
drpower
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/12/08 12:07:34
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2015/12/15 00:57:06
(permalink)
Yes I figured that. I'm going to return it to Amazon.ca... Watch for it there.
|
cirus02
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 2008/09/19 16:42:06
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/01/03 09:30:04
(permalink)
I'm getting mixed info on the memory. The X99 Micro2 takes quad channel memory, but G.Skill Ripjaws F4-3200C16Q-32GVK is dual channel 3200Mh. EVGA stats says it works, but G.Skill stats say its compatible with the Z170.
If the timing is 16-16-16-36, then couldn't u use F4-3200C16D-32GVKA (2x16gb) thus get the max 64gb
Looking to built this:
Thermaltake Level 10 GT
EVGA 131-HE-E095-KR LGA 2011-v3 Intel X99
Intel Core i7-5820K Haswell-E 6-Core 3.3 GHz LGA 2011-v3
Noctua NH-D15 SSO2 D-Type Premium CPU Cooler
EVGA GeForce GTX 960 04G-P4-3967-KR 4GB SSC
EVGA 220-G2-0850-XR 80 PLUS GOLD 850 W ECO
|
GTXJackBauer
Omnipotent Enthusiast
- Total Posts : 10333
- Reward points : 0
- Joined: 2010/04/19 22:23:25
- Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
- Status: offline
- Ribbons : 48
Re: EVGA X99 Micro2!
2016/01/03 09:34:41
(permalink)
cirus02
Looking to built this:
Thermaltake Level 10 GT
Why so much RAM and only a GTX 960 on a X99 setup? You could just go down the i5/i7 Z170 route. Also the case, is a waste of money. Very old design and overpriced. Horrible case to water cool in if you ever chose to down the road. For that kind of funds, I would purchase a newer case from Corsair or NZXT.
Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases: LMD3DNZM9LGK8GJ
|
drpower
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2015/12/08 12:07:34
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/01/03 09:49:29
(permalink)
cirus02
I'm getting mixed info on the memory. The X99 Micro2 takes quad channel memory, but G.Skill Ripjaws F4-3200C16Q-32GVK is dual channel 3200Mh. EVGA stats says it works, but G.Skill stats say its compatible with the Z170.
If the timing is 16-16-16-36, then couldn't u use F4-3200C16D-32GVKA (2x16gb) thus get the max 64gb
Looking to built this:
Thermaltake Level 10 GT
EVGA 131-HE-E095-KR LGA 2011-v3 Intel X99
Intel Core i7-5820K Haswell-E 6-Core 3.3 GHz LGA 2011-v3
Noctua NH-D15 SSO2 D-Type Premium CPU Cooler
EVGA GeForce GTX 960 04G-P4-3967-KR 4GB SSC
EVGA 220-G2-0850-XR 80 PLUS GOLD 850 W ECO
If you use a 5820k on the Micro2 board you'll only get x8 in the second pci-e slot because your NH-D15 will cover the first pci-e slot, get the NH-U14S or NH-U12s to allow use of the top slot. How do I know? I just went through this with my system. Or you could get a 5930k and the second slot will be x16. And 650w PSU is already overkill for single GPU even overclocking everything.
post edited by drpower - 2016/01/03 09:53:09
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84722
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: EVGA X99 Micro2!
2016/01/03 09:58:59
(permalink)
gtxjackbauer
cirus02
Looking to built this:
Thermaltake Level 10 GT
Why so much RAM and only a GTX 960 on a X99 setup? You could just go down the i5/i7 Z170 route.
Also the case, is a waste of money. Very old design and overpriced. Horrible case to water cool in if you ever chose to down the road. For that kind of funds, I would purchase a newer case from Corsair or NZXT.
+1 to this
|
JAC250483
New Member
- Total Posts : 27
- Reward points : 0
- Joined: 2015/12/06 07:39:53
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/01/15 18:46:26
(permalink)
drpower
Always boots to bios. I'm using a 950 pro m.2, it is the only storage drive in my PC. Reset defaults in bios, then enable m.2 save and reset and I get windows. Restarting the system I get windows. Power off, I get bios when power on.
*Edit: With the help of an EVGA tech we narrowed it down to just a Bios setting. I will post the settings soon.
What setting did you change? I'm assuming you enabled s3/s4 compatibility? Without that enabled then I've found that on a cold boot with a 950 pro windows will NOT boot, it takes you to the bios, and if you try and exit the bios it takes you straight back to it until you enable s3/s4 compatibility. Which would be fine...IF it didn't lock the bclk (not the most important thing if I'm honest as bclk shouldn't really be touched on Haswell, it's not like Skylake) but it limits ram speed to 2800MHz
|
wiretap
New Member
- Total Posts : 36
- Reward points : 0
- Joined: 2006/11/08 13:51:16
- Location: Michigan, USA
- Status: offline
- Ribbons : 1
Re: EVGA X99 Micro2!
2016/02/11 14:26:48
(permalink)
Got my Micro2  Just waiting on several more parts, then I can power it up.  
|
Philwong
Superclocked Member
- Total Posts : 106
- Reward points : 0
- Joined: 2015/11/28 06:38:25
- Location: Singapore
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/02/11 21:58:40
(permalink)
You might want to install heatsink for the 950 pro. It runs hot! wiretap
Got my Micro2 Just waiting on several more parts, then I can power it up.
Intel i7-5930K EVGA Micro 2 Corsair LPX 32GB Palit GTX970 SLI Dell U2414H x 3 Samsung 950 Pro WD Green 6TB Corsair HX1000i
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84722
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 86
Re: EVGA X99 Micro2!
2016/02/11 22:50:06
(permalink)
Philwong
You might want to install heatsink for the 950 pro. It runs hot!
wiretap
Got my Micro2 Just waiting on several more parts, then I can power it up.
Although it runs hot that should not affect performance
|
wiretap
New Member
- Total Posts : 36
- Reward points : 0
- Joined: 2006/11/08 13:51:16
- Location: Michigan, USA
- Status: offline
- Ribbons : 1
Re: EVGA X99 Micro2!
2016/02/12 04:55:11
(permalink)
If I have problems with it, I'll send it back. I don't want to void the warranty by ripping the label off to install heatsinks which probably won't fit behind the graphics card. 
|
racem
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2016/04/28 16:44:45
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/04/28 17:04:49
(permalink)
What's the story with this board Jacob? I've had my eyes on it for the intent of this build for months. Has it been sorted yet? I'm not seeing reviews that I'd like to see on NE and elsewhere. Mother's Day is coming up and I've had this lined up to be used in the build I'm going to do for my wife for MD but it seems to have issues. I need to get the order placed soon to have it in time and I don't want any unreasonable issues. I'm an extremely experienced builder so I rarely have any real issues.
The plans are this:
EVGA X99 Micro2
Samsung 950 Pro M.2, will be boot drive and I've seen a lot of issues about this. Resolved?
Mem- undecided so far but will be 16GB of something compatible.
EVGA GTX 960 4G
(Must be the forums have been redone since I was here last, shows me as new but my old reg worked.)
|
syfer1987
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2010/02/26 06:44:15
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/08/31 08:03:35
(permalink)
Hi what the maxim memory RAM Speed?
Does it support all the Haswell e processors?
Does it have usb 3.1?
How do you overclock this as I don’t have clue this why I like the 5 way optimization with auto tuning from asus. Is there any way you can do the same idea with your own program?
Your the only one that I can find with 3.1 and type c.
|
syfer1987
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2010/02/26 06:44:15
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2016/08/31 12:02:09
(permalink)
|
exilelrrp
iCX Member
- Total Posts : 411
- Reward points : 0
- Joined: 2007/02/19 11:00:23
- Location: BX INF
- Status: offline
- Ribbons : 1
Re: EVGA X99 Micro2!
2017/12/08 16:42:10
(permalink)
 I should have done my research!!!!....  ....I purchased the i7 6850K and wanted to go Micro with either the Asus X99-M WS or the Evga X99 M2, but it's been a mission impossible to get, I did manage to find the (Asus X99-M WS), but man did I go through some **** to get it from Canada!  ..Now I'm having issues where the Mobo is stuck on (CODE 00) don't know if it's the Mobo or Cpu  ...Luckily for me I have a family member with the same CPU on his Mobo, so I can test the Cpu and I'm hoping the Cpu is the issue!!...Why?....Because of that whole Canada doesn't ship the Mobo directly to the U.S. ordeal.  Update : It was the CPU, it died.
post edited by exilelrrp - 2017/12/17 14:48:33
*Lian Li PC-011D Mini (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z73/Lian Li UNI SL120 Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce RTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 MK.2 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate. 
|
4x4jon
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2020/05/17 10:17:30
- Status: offline
- Ribbons : 0
Re: EVGA X99 Micro2!
2020/05/17 10:34:29
(permalink)
Hello Everyone, [Removed ---> All wanted to Buy [WTB] & any Sales are only allowed in the EVGA Marketplace - As a New member you are Not eligible at this time 17. How to Apply for the EVGA Marketplace] Thank You, Jon edit by Cool GTX
post edited by Cool GTX - 2020/05/17 10:42:33
|