Pulloutking
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2014/02/21 20:53:00
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/14 19:21:33
(permalink)
sounds good, nateman. I will see if I can send one. if someone closer could depending on where you live it might be faster lol. I live in Alaska. so it would take up to a week to get to lower 48.
|
Deathstroke44
iCX Member
- Total Posts : 305
- Reward points : 0
- Joined: 2009/12/27 01:01:14
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/14 19:56:33
(permalink)
well i live down here in the contiguous states so i wouldnt mind sending it for reference. i could also send the block with it for reference if you need it but im sure you prefer to create things from scratch ;P suppose this really belongs in the 680 classy interest thread though XD cant wait to post on it :). can work out the details and whatnot when the thread is posted :) one more thing... my 680 classy has an evbot connector. im sure there are others out there with it, but it would be very important that the block take account for that XD since I know there are alot of 680 classy's (and the 770 classy's) that dont have it.
post edited by Deathstroke44 - 2014/06/14 19:59:34
|
Pulloutking
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2014/02/21 20:53:00
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/14 20:17:55
(permalink)
agreed, I shall also wait for the thread. looking forward to it :)
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/15 09:55:03
(permalink)
I found all the tracking info if you guys didn't receive the blocks yet.
|
LucaJ
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2013/11/12 06:22:39
- Location: Florence, Italy
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/15 11:42:01
(permalink)
I received the Customs declaration number, I tried to put it on usps.com, but the answer is: - Tracking information is not available at this time. Please check back later or double-check the tracking number entered and try again.
It is normal or did I do something wrong? Thanks
|
Deathstroke44
iCX Member
- Total Posts : 305
- Reward points : 0
- Joined: 2009/12/27 01:01:14
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/15 13:39:31
(permalink)
I believe a customs declaration number means you go to customs, give them your declaration number to pick it up from them.... I could be wrong, but ive dealt with customs before..... they are very picky. they sent back an item i shipped to france once, because the invoice wasnt IN the box.... I was quite livid as it cost me 70 dollars to send that freaking package. not to mention the worry of 5 weeks not knowing what the hell happened to 900 dollars worth of card (back when you could sell gtx680 classifieds with the block and evbot connector for that much).
|
LucaJ
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2013/11/12 06:22:39
- Location: Florence, Italy
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/16 01:36:05
(permalink)
Deathstroke44
I believe a customs declaration number means you go to customs, give them your declaration number to pick it up from them.... I could be wrong, but ive dealt with customs before..... they are very picky. they sent back an item i shipped to france once, because the invoice wasnt IN the box.... I was quite livid as it cost me 70 dollars to send that freaking package. not to mention the worry of 5 weeks not knowing what the hell happened to 900 dollars worth of card (back when you could sell gtx680 classifieds with the block and evbot connector for that much).
Do you mean that the package will not arrive at my house? Should I wait or should I do something?
post edited by LucaJ - 2014/06/16 01:40:00
|
Boddaker
iCX Member
- Total Posts : 316
- Reward points : 0
- Joined: 2007/02/09 17:13:09
- Location: Where the beer flows like wine
- Status: offline
- Ribbons : 18
Re:EVGA X79 DARK WATERBLOCK
2014/06/16 11:46:17
(permalink)
☄ Helpfulby nateman_doo 2014/08/28 09:04:12
Hey Nate, finally getting my Cosmos Cruizer build wrapped up. Here's a quick shot of your block in place, with all the rigid tubing. I'll get better pics up after I get everything painted and the loop filled. Thanks again! 
post edited by Boddaker - 2014/06/16 11:50:06
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/16 12:01:30
(permalink)
Awesome! It looks sexy as hell!
|
TECH_DaveB
EVGA Alumni
- Total Posts : 4661
- Reward points : 0
- Joined: 2008/09/26 17:03:47
- Status: offline
- Ribbons : 46
Re:EVGA X79 DARK WATERBLOCK
2014/06/16 13:16:59
(permalink)
Boddaker
Hey Nate, finally getting my Cosmos Cruizer build wrapped up. Here's a quick shot of your block in place, with all the rigid tubing. I'll get better pics up after I get everything painted and the loop filled. Thanks again!
That looks SWEET! I also swear by my Nateman_Doo blocks, they are excellent!
|
William
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 2010/09/24 18:53:08
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/19 15:54:55
(permalink)
Anyone have advice on how to mount these? Everyone using thermal tape? I suspect there will be unevenness with the different chips. Any TIM in a addition tape? Also I notice the underside of the chipset block is not exposed copper. I'm wondering if I should use a non conductive TIM like ceramic or something.
|
CharlesLam
New Member
- Total Posts : 11
- Reward points : 0
- Joined: 2014/04/17 12:54:55
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/20 10:20:45
(permalink)
wow. talk about custom epic awesome.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/20 11:26:00
(permalink)
William
Anyone have advice on how to mount these? Everyone using thermal tape? I suspect there will be unevenness with the different chips. Any TIM in a addition tape? Also I notice the underside of the chipset block is not exposed copper. I'm wondering if I should use a non conductive TIM like ceramic or something.
You can always lap the chipset block if you want. Since that South bridge block gives off like, 10W or something, its not the focus of thermal worries... your vreg is. Try out different combo's and see what works best for you. CharlesLam
wow. talk about custom epic awesome.
Thanks!
|
jameyscott
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2013/09/07 08:31:11
- Status: offline
- Ribbons : 1
Re:EVGA X79 DARK WATERBLOCK
2014/06/24 02:04:05
(permalink)
Boddaker
Hey Nate, finally getting my Cosmos Cruizer build wrapped up. Here's a quick shot of your block in place, with all the rigid tubing. I'll get better pics up after I get everything painted and the loop filled. Thanks again!
That looks absolutely amazing man! I've been wanting to do something like this. I think all straight down pipe just looks fantastic!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/24 18:12:57
(permalink)
Guess who is going to own a DARK board tomorrow?
ME!
My X58 board died, and they didn't have anymore (duh, its been 5 years). Lifetime warranty on the board got me the latest & greatest. This is why I will be EVGA boards for life. my old serial number was like 000010. heh.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24079
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re:EVGA X79 DARK WATERBLOCK
2014/06/24 18:18:46
(permalink)
nateman_doo
Guess who is going to own a DARK board tomorrow?
ME!
Β
My X58 board died, and they didn't have anymore (duh, its been 5 years).Β Lifetime warranty on the board got me the latest & greatest.Β This is why I will be EVGA boards for life.Β my old serial number was like 000010.Β heh.
Β
Β
You should order one of those super sweet blocks for the Dark.... :-D hehe.
|
William
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 2010/09/24 18:53:08
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/24 19:11:56
(permalink)
nateman_doo
Guess who is going to own a DARK board tomorrow?
ME!
My X58 board died, and they didn't have anymore (duh, its been 5 years). Lifetime warranty on the board got me the latest & greatest. This is why I will be EVGA boards for life. my old serial number was like 000010. heh.
Welcome to the club. Scarlet-Tech
You should order one of those super sweet blocks for the Dark.... :-D hehe.
Now that was funny. :)
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/25 08:03:26
(permalink)
Should I? Do you think the guys that makes them will hook me up?!
literally... 5 years ago TODAY is when my X58 went live. 5 years to the DAY today, my X79 Dark goes LIVE. What are the odds?! And what are the odds of going that long without an upgrade?! Kudos to the X58 platform. It was (is) rock solid and ran every application I threw at it for the past half a decade.
|
William
New Member
- Total Posts : 60
- Reward points : 0
- Joined: 2010/09/24 18:53:08
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/25 10:41:26
(permalink)
Yeah my x58 ran forever and would probably boot right up if I hooked it up.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/25 10:55:50
(permalink)
I firmly believe it would still be fine if my ancient power supply didnt bite the dust. It was a refurbished Antec 1KW. Lasted for yeeeaaarrrs. but I overclocked like crazy for a while, so I am sure it shortened the lifespan.
|
euncall
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2013/10/12 01:00:45
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/27 05:09:43
(permalink)
Hi
i'am korean
evga mania
evga dark motherboard user
your make waterblock buy?
Please........
mintx1513@naver.com
|
Vlada011
Omnipotent Enthusiast
- Total Posts : 10126
- Reward points : 0
- Joined: 2012/03/25 00:14:05
- Location: Belgrade-Serbia
- Status: offline
- Ribbons : 11
Re:EVGA X79 DARK WATERBLOCK
2014/06/27 15:14:08
(permalink)
Board will look sick with blocks... How that is hard and need precise work... But you can't more custom than this, maybe is time for designing some universal VGA block for wide non-reference graphic cards. This is incredible job. Guess who is going to own a DARK board tomorrow?
ME!
My X58 board died, and they didn't have anymore (duh, its been 5 years). Lifetime warranty on the board got me the latest & greatest. This is why I will be EVGA boards for life. my old serial number was like 000010. heh.
My EVGA Z77 FTW is 007. 
post edited by Vlada011 - 2014/06/27 15:18:48
|
LucaJ
Superclocked Member
- Total Posts : 144
- Reward points : 0
- Joined: 2013/11/12 06:22:39
- Location: Florence, Italy
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/28 07:25:49
(permalink)
☄ Helpfulby nateman_doo 2014/08/28 09:05:01
Hi nateman_doo, the WBS have finally arrived and they are fantastic!   Thanks 
|
vaperstylz
Superclocked Member
- Total Posts : 139
- Reward points : 0
- Joined: 2006/01/13 07:02:15
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/28 12:02:18
(permalink)
Hey nateman_doo. I recently had my E760 X58 Classified mobo quit on me. And I received the same rma deal you did. I now own a X79 Dark. Evga is GREAT the way they honored my warranty. I will be dropping a 3930K in it soon. A friend is giving me a great deal on one. Anyway I see that you are making waterblocks for the Dark. And I am very interested in your product. I will drop you a pm for pricing & availability. I am looking forward to the new platform. But I sure do miss my X58. That board was a tank! Lol
|
euncall
New Member
- Total Posts : 13
- Reward points : 0
- Joined: 2013/10/12 01:00:45
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/28 18:53:33
(permalink)
Hello
I am a person of South Korea
EVGA X79 DARK WATER BLOCKS made ββyou want to purchase.
Give us some information.
Please knock.
|
iamSneaky
iCX Member
- Total Posts : 444
- Reward points : 0
- Joined: 2012/04/11 01:05:16
- Location: Australia
- Status: offline
- Ribbons : 0
Re:EVGA X79 DARK WATERBLOCK
2014/06/29 04:23:26
(permalink)
euncall
Hello
I am a person of South Korea
EVGA X79 DARK WATER BLOCKS made ββyou want to purchase.
Give us some information.
Please knock.
Send Nate a private message to order blocks ;-)
SS07: Lian Li O11 Dynamic XL|i9 10900K [SP 98][Bykski FR-CU-RA-V2 CPU Block]|ASUS ROG Maximus XIII ExtremeEVGA RTX 3080 FTW3 Ultra [Bykski Block]|Galax HoF OC Lab Edition 4600mhz|Alienware AW2721DEVGA Supernova P2 1600
Elite ID: BJBC3RMQSBKAR2ALRHN
|
Gaaretjax
Superclocked Member
- Total Posts : 162
- Reward points : 0
- Joined: 2006/04/10 17:33:53
- Status: offline
- Ribbons : 1
Re:EVGA X79 DARK WATERBLOCK
2014/06/29 09:41:55
(permalink)
☄ Helpfulby nateman_doo 2014/08/28 09:00:47
Just wanted to post and thank Nate again for his fantastic work on the Dark Vreg and Chipset blocks. System been purring exceedingly well and vreg temps under load never above 43C. Current 24/7 is a 4930k Oc'd to 4.6 on 1.29v and memory solid at 1866mhz with 1.55v. Very happy with this build. For anyone wanting blocks Nate is the Guy to goto. Top notch all the way around in quality. I hope Nate continues this " Hobby" on the side for a good while cause every new build i'm gonna be checking if he will be making blocks for new MB's coming down the pipe :)
Thanks again Nate!
EVGA X299 Dark 9900X CPU oc'd @ 5.0GHZ 64GB Ram 2x 2080TI FTW3 HC in SLI Mountain Mods Ext UFO CYO Case Affiliate code# M90AIN72H1 
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/06/30 07:27:08
(permalink)
Glad to hear back from "Dark Alumni"! :) Nothing makes me happier then to hear you guys are happy with the blocks!
I will keep on making blocks, and new machines to make the blocks. Probably the most fun hobby I ever had. I hit pause on my new machine to take care of the mounting orders of other blocks.
Now I have to break hearts. The SR2 folks beat you guys. I still need 2 more bodies for this batch. I have Vaperstylz & euncall that will fill up the batch if they check their PM's and send me their paypal email address. I will order your stuff right away and get to work on it as soon as the small SR2 batch is cut. On the bright side, they do cut faster then the Darks. Simply because its 1 fixture plate for the SR2's vs 2 fixture plates for the Darks. I know drake, lamechw, and fusion have been waiting a while since they sent their deposits in a while back but I have to fill the batch.
There are a few quirks I am trying to figure out on my Dark board. First, it doesn't restart. When I have windows go to restart, it just shuts down. I have to turn it back on. Plus it takes a while to get to windows. I just printed the owners manual since it didn't come with the RMA board, but I think I will have some fun with this board.
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA X79 DARK WATERBLOCK
2014/07/02 11:33:41
(permalink)
Drake, Lamechw, check your PM's.
|
fusionssl
FTW Member
- Total Posts : 1216
- Reward points : 0
- Joined: 2008/08/04 05:06:39
- Location: Cairns, Australia
- Status: offline
- Ribbons : 5
Re:EVGA X79 DARK WATERBLOCK
2014/07/03 03:46:07
(permalink)
No worries Nate i am in no rush,
rig 1 X79 DARK 3940k (4.4oc), corsair Platinum 2133mhz,Evga GTX580 2way sli, mountain mod assention, rig 2 EVGA X58 759 CLASSIFIED I7 930/ 4.5GHZ Corsair Domminator 2153MHZ 10,10,10,24/1T Evga GTX 460 
|