EVGA

Hot!EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery

Page: < 12345 > Showing page 2 of 5
Author
jayrwar
Superclocked Member
  • Total Posts : 113
  • Reward points : 0
  • Joined: 2020/05/27 06:42:57
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/13 11:25:36 (permalink)
Thanks this will really help when I get mine.
#31
CoMarc
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2009/03/22 20:55:48
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 08:22:15 (permalink)
Thanks for the pictures!  This is exactly what I was looking for as I prepare to install a 30xx Hybrid in my Lian Li 011XL (whenever they're available again, that is).  Your build looks pretty similar to my own:
 
Lian Li 011Dynamic XL
Lian Li Vertical GPU bracket
ASUS B550-E
AMD 5800x
32Gb Corsair RGB 3600
Corsair Pro 150i AIO
10x Corsair fans (QL120's + non-RGB)
(eventually) eVGA 30xx Hybrid
post edited by CoMarc - 2020/12/14 09:33:08
#32
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 09:56:10 (permalink)
SeanDude05
So is there barely any heatsink for the VRMs?

There is actually, the plate has thermal paste on it and it makes contact to the AIO. Therefore the memory is being AIO cooled too. YOu can see my temperature results here. 
 
https://forums.evga.com/EVGA-RTX-3080-FTW3-Hybrid-I-measured-my-GPUs-Temperature-C-vs-Fan-Speed-PushPull-m3174809.aspx
 

https://preview.redd.it/wznvqlmabu461.png?width=4926&format=png&auto=webp&s=32802654f87b52df80d4c0c96c29bd828f856980
 
 
#33
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 10:03:46 (permalink)
jamexr
Did you plug the rad fans to the card as the per the instructions? Being that our cards have bioses intended for the stock heatsink fans, do the rad fans stop (when the bios switch is in the normal position) as if they were the regular heatsink fans? I wish evga released a bios that is intended for us users that are converting their air cooled cards to the hybrid kits....


 
No, I plugged the fans into my motherboard, I have giant fan header that can deliver up to 3As, so I plugged them into that one. I don't want to zap power from the GPU. At 100%, that can be about 12W taken from my 4 fans. 

Carmen813
SeanDude05
So is there barely any heatsink for the VRMs?

Thats what I'm concerned about too.

 
Check out my response above, the plate is tied to the AIO, you can see thermal paste on the plate. I also made a topic to share temperature test I did, check above again. 

green4191
Do you know the max fan rpm for the included fans? If they're fast enough I want to do push pull. And did you need to switch to the hybrid bios or can you keep the xoc beta bios air cooled version?

 
I believe they are 2000 RPM fans, someone else will have to chime in. 

nabeelst
Im replacing the fans with Arctic P12 PWM fans and will do a push pull configuration. Currently I’m doing a push pull and getting 100 oc on core with temps of up to 55. Once i get the arctic P12, the noise of the fans will be silent and the temps should be cooler lol.


That's a good plan, I wish I did test push vs pull vs push-pull but I don't have enough time in the day. Went straight to push-pull haha. 




#34
AyoKato
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2020/10/08 21:55:29
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 13:33:10 (permalink)
Do you know if the hoses will fit from that location with a normal horizontally installed GPU?
#35
glocked89
Superclocked Member
  • Total Posts : 186
  • Reward points : 0
  • Joined: 2019/01/16 23:48:00
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 13:43:17 (permalink)
AyoKato
Do you know if the hoses will fit from that location with a normal horizontally installed GPU?

Lian Li o11 dynamic XL here. Installed the ftw3 hybrid kit horizontally and i cannot close the tempered glass fully without making the tubes coming out do a gnarly bend. Ordered a vertical gpu mount.
#36
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 13:48:30 (permalink)
glocked89
AyoKato
Do you know if the hoses will fit from that location with a normal horizontally installed GPU?

Lian Li o11 dynamic XL here. Installed the ftw3 hybrid kit horizontally and i cannot close the tempered glass fully without making the tubes coming out do a gnarly bend. Ordered a vertical gpu mount.



Share pics! That would be nice! Someone showed me photos of the card mounted horizontally fine in an XL. So I am surprised. Maybe they had a XC3, I didn't see the card itself. 
#37
Protofax
New Member
  • Total Posts : 23
  • Reward points : 0
  • Joined: 2015/06/17 14:38:12
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 14:23:10 (permalink)
I still have not decided where I am going to put my radiator. I already have a 360mm one for my CPU taking up a lot of space on a Thermaltake P5. There is really nowhere else to put it because the 3090 takes up the spot for the second radiator. Maybe I can stack them.
#38
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 14:27:06 (permalink)
Protofax
I still have not decided where I am going to put my radiator. I already have a 360mm one for my CPU taking up a lot of space on a Thermaltake P5. There is really nowhere else to put it because the 3090 takes up the spot for the second radiator. Maybe I can stack them.




Share a picture of your setup. 
#39
AyoKato
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2020/10/08 21:55:29
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 17:13:02 (permalink)
KingEngineRevUp
glocked89
AyoKato
Do you know if the hoses will fit from that location with a normal horizontally installed GPU?

Lian Li o11 dynamic XL here. Installed the ftw3 hybrid kit horizontally and i cannot close the tempered glass fully without making the tubes coming out do a gnarly bend. Ordered a vertical gpu mount.



Share pics! That would be nice! Someone showed me photos of the card mounted horizontally fine in an XL. So I am surprised. Maybe they had a XC3, I didn't see the card itself. 


 
Not exactly what I wanted to hear. I have the regular case, non XL but was also trying to get the XC3 not FTW3. Hopefully the size difference between models helps it fit. Would definitely prefer to keep it horizontally mounted if possible. 
#40
gian1983
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/09/18 05:31:56
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 21:52:23 (permalink)
Still prefer a full waterblock then hybrid 
#41
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/14 22:52:05 (permalink)
gian1983
Still prefer a full waterblock then hybrid 



#42
bonelesscheese
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2018/11/29 22:20:54
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/15 18:51:13 (permalink)
Any word on whether or not the kit's included thermal paste is any good? My kit comes Thursday and the soonest I can get any Kryonaut is Friday and I don't want to have to wait another day to install it onto my 3090. First world problems, I know, but any feedback would be appreciated.
#43
jamexr
iCX Member
  • Total Posts : 265
  • Reward points : 0
  • Joined: 2016/07/21 16:30:16
  • Location: SLC, Utah, USA
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/15 19:06:24 (permalink)
bonelesscheese
Any word on whether or not the kit's included thermal paste is any good? My kit comes Thursday and the soonest I can get any Kryonaut is Friday and I don't want to have to wait another day to install it onto my 3090. First world problems, I know, but any feedback would be appreciated.


The gpu block has thermal paste already pre applied and its good. My 3080 ftw ultra with the kit and xoc bios never goes above the fifties on stock fan settings. The included thermal paste pack is just an extra I would guess in case you want to put the card back to stock.
#44
bonelesscheese
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2018/11/29 22:20:54
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/15 19:09:26 (permalink)
jamexr
bonelesscheese
Any word on whether or not the kit's included thermal paste is any good? My kit comes Thursday and the soonest I can get any Kryonaut is Friday and I don't want to have to wait another day to install it onto my 3090. First world problems, I know, but any feedback would be appreciated.


The gpu block has thermal paste already pre applied and its good. My 3080 ftw ultra with the kit and xoc bios never goes above the fifties on stock fan settings. The included thermal paste pack is just an extra I would guess in case you want to put the card back to stock.


Great. Thanks!
#45
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/15 20:38:01 (permalink)
bonelesscheese
Any word on whether or not the kit's included thermal paste is any good? My kit comes Thursday and the soonest I can get any Kryonaut is Friday and I don't want to have to wait another day to install it onto my 3090. First world problems, I know, but any feedback would be appreciated.


Usually on AIOs the thermal paste hardly makes a difference. You should be fine.

The bottleneck is the AIO heat spreader itself if anything.
#46
sunshineX
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2020/12/15 22:39:54
  • Status: offline
  • Ribbons : 0
Flagged as Spam (1)
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 01:29:13 (permalink)
awesome
#47
SeanDude05
Superclocked Member
  • Total Posts : 167
  • Reward points : 0
  • Joined: 2017/04/04 20:25:41
  • Location: USA
  • Status: offline
  • Ribbons : 1
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 06:55:11 (permalink)
bonelesscheese
Any word on whether or not the kit's included thermal paste is any good? My kit comes Thursday and the soonest I can get any Kryonaut is Friday and I don't want to have to wait another day to install it onto my 3090. First world problems, I know, but any feedback would be appreciated.


I installed with the stock paste to see how it did, and in Cyberpunk it went from 70C to 52C


EVGA RTX 3080 FTW3 ULTRA + Hybrid Kit
#48
gabolton
Superclocked Member
  • Total Posts : 228
  • Reward points : 0
  • Joined: 2011/01/16 06:42:06
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 10:00:24 (permalink)
Anyone willing to share a link for a vertical mount that's solid and works well?
 
I have a Lian-Li 011 dynamic XL case as well and I'm running an Arctic 280 up top for the CPU. I currently have 3x Noctua's running on the side as intakes and 3x on the bottom as intakes. My first though was something janky like radiator between the motherboard back plate and the outside cover with the noctua's on the inside of the case but open to better ideas.

10G-P5-3885-KR 9/17/2020 5:57:01 PM Yes
10G-P5-3897-KR 9/17/2020 5:56:32 PM Yes
 
Current Specs
i9-10850k @5.0
Asus Strix Z490-E
Seasonic Prime TX-1000
Corsair Dominator Platinum 3466 2x 16gb
FTW3 Ultra 3080 (with black lips)
Samsung 970 Evo Plus 1TB Nvme
Crucial MX500 2 TB ssd
Arctic Freezer 280 Rev 2
7x Noctua AF-A12x25 pwm fans
Lian-Li O11 Dynamic XL
#49
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 10:11:44 (permalink)
gabolton
Anyone willing to share a link for a vertical mount that's solid and works well?
 
I have a Lian-Li 011 dynamic XL case as well and I'm running an Arctic 280 up top for the CPU. I currently have 3x Noctua's running on the side as intakes and 3x on the bottom as intakes. My first though was something janky like radiator between the motherboard back plate and the outside cover with the noctua's on the inside of the case but open to better ideas.




I'm using a Phanteks Vertical Mount. 
#50
gabolton
Superclocked Member
  • Total Posts : 228
  • Reward points : 0
  • Joined: 2011/01/16 06:42:06
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 10:41:44 (permalink)
KingEngineRevUp
I'm using a Phanteks Vertical Mount. 



Did you need to use a support other than the bracket?
 
Did you need to mod the case or just plug in, screw it together and go?

10G-P5-3885-KR 9/17/2020 5:57:01 PM Yes
10G-P5-3897-KR 9/17/2020 5:56:32 PM Yes
 
Current Specs
i9-10850k @5.0
Asus Strix Z490-E
Seasonic Prime TX-1000
Corsair Dominator Platinum 3466 2x 16gb
FTW3 Ultra 3080 (with black lips)
Samsung 970 Evo Plus 1TB Nvme
Crucial MX500 2 TB ssd
Arctic Freezer 280 Rev 2
7x Noctua AF-A12x25 pwm fans
Lian-Li O11 Dynamic XL
#51
glocked89
Superclocked Member
  • Total Posts : 186
  • Reward points : 0
  • Joined: 2019/01/16 23:48:00
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 12:03:36 (permalink)
KingEngineRevUp
glocked89
AyoKato
Do you know if the hoses will fit from that location with a normal horizontally installed GPU?

Lian Li o11 dynamic XL here. Installed the ftw3 hybrid kit horizontally and i cannot close the tempered glass fully without making the tubes coming out do a gnarly bend. Ordered a vertical gpu mount.



Share pics! That would be nice! Someone showed me photos of the card mounted horizontally fine in an XL. So I am surprised. Maybe they had a XC3, I didn't see the card itself. 

https://imgur.com/toLykqq
https://imgur.com/2sbXhNe

Okay installed it last night. I have a 3x90mm fan array blowing on the backplate. It gets hot. Did a 3dmark pcie express test with the riser and bandwidth is the same as if it was plugged in directly to motherboard.
#52
Synntax01
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2019/02/13 13:42:34
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 12:52:27 (permalink)
Would there be enough clearance in the o11 dynamic mid case vs the XL for the GPU rad?
#53
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 15:21:52 (permalink)
Synntax01
Would there be enough clearance in the o11 dynamic mid case vs the XL for the GPU rad?


The XC3 can fit fine. The FTW3 might need a vertical mounting kit.

The XL can fit both.
#54
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 15:24:10 (permalink)
gabolton
KingEngineRevUp
I'm using a Phanteks Vertical Mount. 



Did you need to use a support other than the bracket?
 
Did you need to mod the case or just plug in, screw it together and go?


I did not mod the case. The bracket can have some sag which can be solved by putting shims here to angle the card better. You can tape like a piece of plastic or something so the card is angled to your liking. 
 

 


https://imgur.com/a/45kYQOa
#55
CrankTat
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2020/12/16 16:04:57
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 16:06:40 (permalink)
Hello,
 
I have an FTW3 Ultra (non hybrid)
 
I think I saw you post a photo of a normal FTW3 Ultra, how is the difference performance wise with them?
 
My FTW3 ultra doesn't get passed +130 in x1 (2085mhz max  )
 
 
(Gaming is +130) (Furmark +230) (Heaven +190) = all about 2085mhz cap though
 
Memory I can get to about +1500 = about 11000-11500 before it stops being unstable
 
I'm wondering how your Hybrid performs because I'm interested in getting that rather than spending extra money to go custom loop.
 
Could you let me know how it overclocks and everything about it performance wise?
 
Cheers!
post edited by CrankTat - 2020/12/16 16:11:00
#56
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/16 16:19:43 (permalink)
CrankTat
Hello,
 
I have an FTW3 Ultra (non hybrid)
 
I think I saw you post a photo of a normal FTW3 Ultra, how is the difference performance wise with them?
 
My FTW3 ultra doesn't get passed +130 in x1 (2085mhz max  )
 
 
(Gaming is +130) (Furmark +230) (Heaven +190) = all about 2085mhz cap though
 
Memory I can get to about +1500 = about 11000-11500 before it stops being unstable
 
I'm wondering how your Hybrid performs because I'm interested in getting that rather than spending extra money to go custom loop.
 
Could you let me know how it overclocks and everything about it performance wise?
 
Cheers!




I made a performance thread here: https://forums.evga.com/3080-FTW3-Hybrid-3DMark-Scores-m3176391.aspx
 
You're not going to get much more out of your card. What you will get is a more quiet system. 
 
I game with +115 with 0 on the core. I can probably game at high with 100% on the core but I don't want to deal with that extra heat. The point for me was a more quiet system. Adding more voltage adds more heat. 
#57
Sacrilegion
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2016/04/28 04:57:40
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/17 10:50:29 (permalink)
Has anyone tried this with the 3070 ftw3? Is there any fundamental reason why it will not work?
#58
KingEngineRevUp
FTW Member
  • Total Posts : 1024
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/17 11:07:38 (permalink)
Sacrilegion
Has anyone tried this with the 3070 ftw3? Is there any fundamental reason why it will not work?




The boards seem different from one another, a lot of hole placements are in different locations. Even the 3070 GPU die is rotated 90 degrees. The 3070 generates less power, there's really no reason to Hybrid it anyways. 
 
3070 FTW3
 

 
3080 FTW3
 

#59
tonyz2388
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2020/12/09 11:55:20
  • Status: offline
  • Ribbons : 0
Re: EVGA RTX 3080 FTW3 Hybrid kit unboxing and installation gallery 2020/12/17 11:23:23 (permalink)
Nice! I want to get this one too but don't know if the tubes would reach the front of my case
#60
Page: < 12345 > Showing page 2 of 5
Jump to:
  • Back to Mobile