EVGA

EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY

Page: < 1234 > Showing page 3 of 4
Author
Post
Essentials Only Full Version
q5sys
Superclocked Member
  • Total Posts : 153
  • Reward points : 0
  • Joined: 2016/09/02 10:55:23
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/26 10:54:25 (permalink)
So I've got a question about the new version with my 3080, I'm seeing really weird behavior while rendering.
In GPU-Z I'm seeing that my perf limit is due to VRel and VOP, but I'm at 66.9% TDP at 254.2W.  
I've got the voltage slider all the way up, and Power target at 105%, but I'm still being limited by voltage.

Im guessing this is because of the differing power demands of the various parts of the GPU Core at work during the rendering workload... hence why I can hit these kind of clocks during rendering.  I havent done any gameplay testing becuase the newest game I have is Fallout4, and even at 4k i'm guessing that wont max the card out. 
Is there anyway that I can give the voltage a little higher of a bump?
Ideas?


https://i.imgur.com/j5Jzze2.png
#61
NGCathey
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2009/04/16 20:45:27
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/26 17:19:46 (permalink)
Roy10266
 
Loading a profile now automatically applies it.


Thanks!
#62
DarkTAO
iCX Member
  • Total Posts : 345
  • Reward points : 0
  • Joined: 2010/12/28 20:14:36
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/27 11:38:16 (permalink)
Is there a way to have the program minimise to tray when hitting x instead of fully closing? Some programs allow that as a toggleable option. I keep closing precision x..

 24G-P5-3987-KR
09/24/2020 01:16:10 PM PT Yes
Delivered 17 Hours From Purchase
Intel i9-9900K
EVGA RTX 3090 FTW3 Ultra
EVGA CLC-280
Asus PG279Q
LG CX OLED 55"
EVGA RTX 3090 FTW3 Ultra/Hybrid Cooler
Gigabyte Z390 Aorus Master
32GB G.Skill TridentZ DDR4 3600
EVGA Supernova 850 T2
Samsung 970 EVO 1TB NVMe M.2 SSD
Samsung 850 pro 512GB SSD
Samsung 840 500GB SSD
 
 
08G-P5-3751-KR
10/28/2020 04:27:02 PM PT No


24G-P5-3987-KR
10/02/2020 17:12:43 PM PT No - Not Buying
 Removing Once 3090 Arrives
10G-P5-3897-KR
09/24/2020 01:35:27 PM PT No - Not Buying
Removing Once 3090 Arrives [
#63
Carmen813
Superclocked Member
  • Total Posts : 202
  • Reward points : 0
  • Joined: 2012/03/26 14:32:10
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/27 16:11:13 (permalink)
Is anyone able to load a profile after running the auto OC? As far as I can tell, the curve doesn't save after I reboot PC or the app. 

#64
Carmen813
Superclocked Member
  • Total Posts : 202
  • Reward points : 0
  • Joined: 2012/03/26 14:32:10
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/27 16:12:43 (permalink)
Axejess
Seems when i do the oc scan on my 3080 it just crashes the system and reboots. Anyone else have that as well?
 


I fixed this problem on my 3090 by doing a full uninstall of drivers (DDU). The new scan OC saves them to the driver settings, so I think that was cause of issue.

#65
JJ_Cane_Reddit
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2020/10/06 03:25:24
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/28 04:28:10 (permalink)
Will PX1 allow you to change power limits as well?
#66
Sajin
EVGA Forum Moderator
  • Total Posts : 49167
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: online
  • Ribbons : 199
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/28 12:03:46 (permalink)
JJ_Cane_Reddit
Will PX1 allow you to change power limits as well?


Yes.


See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
#67
chocmangue
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2018/01/02 09:46:15
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 09:04:40 (permalink)
Hi,
The nvidia driver 457.09 has broken the fan control in EVGA Precision X1 (1.1.0.11) for my EVGA 3080 FTW3 ULTRA.
At default, they all run at the same speed of 33%, no problem here.  But if I set a manual fan speed of for example 60% (linked or not linked doesn't matter), FAN1 and 2 will run at 43% whereas FAN3 runs at 60% like it's supposed to. When manually set to 80%, FAN1 and 2 run at 71% and the 3rd one at 80%.
The fan curve control also doesn't work properly.
I've tried reinstalling EVGA Precision X1, it didn't work, the only thing that fixed this issue was to revert back to the nvidia driver 456.98.
The firmware version is 2.1.1.4, the BIOS version is 94.02.26.80.9C (400W BIOS) and the switch is set to OC if that matters.

Delwyn69
I have notice a prossible problem, which consists of rather high cpu usage of 0.5-2%. Is this normal? I kinda feel this is a lot, since it doesn't go down even when minimized. Is it supposed to be like this?

I noticed the same thing (1-2% cpu usage) with the OSD, HWM, LED Sync and Boost Clock set to OFF.


#68
Talon2020
iCX Member
  • Total Posts : 298
  • Reward points : 0
  • Joined: 2016/05/26 12:17:13
  • Status: offline
  • Ribbons : 3
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 09:46:12 (permalink)
Same, newest drivers from nvidia break my fan control in PX1 1.1.0.11. My fan 3 works fine, but fans 1 & 2 spin about 10% slower even when are all manually set to same speed. Fan 1 & 2 will just go to about 10% less than whatever I set in PX1. Rolling back driver to hotfix driver 456.98 fixes the issue. Also attempted to install PX1 again, also tried DDU and clean install multiple times. Only fix was using older driver. 

i9 13900K | EVGA Z690 DARK | NVIDIA RTX 4090 FE | 32gb DDR5 8000 CL36 SK Hynix A-Die | Samsung 980 Pro 2TB | EVGA 1000 P6 | LG C1 55 OLED 4K 120Hz G-Sync
#69
jankerson
SSC Member
  • Total Posts : 901
  • Reward points : 0
  • Joined: 2017/07/13 06:50:53
  • Status: offline
  • Ribbons : 1
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 09:48:35 (permalink)
3080 FTW3 Ultra.
 
There is a glitch in the software, noticed it after the new driver install.
 
When you set a fan profile fan 1 and 2 drop down to 14% even on the aggressive setting that should be 40%.
 
Default with the OC Bios is 33% so that's close enough until it's fixed.
 
 
post edited by jankerson - 2020/10/29 09:52:58

i9 9900K @ 5.0 GHz, NH D15, 32 GB GSKILL Trident Z RGB, AORUS Z390 MASTER, EVGA RTX 3080 FTW3 Ultra, Samsung 970 EVO Plus 500GB, Samsung 860 EVO 1TB, Samsung 860 EVO 500GB, ASUS ROG Swift PG279Q, Steel Series APEX PRO, Logitech Gaming Pro Mouse, CM Master Case 5, Corsair AXI 1600W.
 
i7 8086K, AORUS Z370 Gaming 5, 16GB GSKILL RJV 3200, EVGA 2080TI FTW3 Ultra, Samsung 970 EVO 250GB, (2)SAMSUNG 860 EVO 500 GB, Acer Predator XB1 XB271HU, Corsair HXI 850W.
 
i7 8700K, AORUS Z370 Ultra Gaming, 16GB 16GB DDR4 3000, EVGA 1080Ti FTW3 Ultra, Samsung 960 EVO 250GB, Corsair HX 850W.
#70
ckenda1
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2007/09/16 11:11:54
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 10:38:45 (permalink)
Experiencing the same fan issue with 3080 XC3 Ultra with the latest 457.09 driver and PX1 1.1.0.11.  Fans 1 and 2 are reporting 50% slower speed than fan 3 with the aggressive fan curve.
 
For example if fan 3 is at 46%, fan 1 and 2 are reporting 23%.
#71
Bluedragonwolf
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2016/09/29 17:13:46
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 10:52:27 (permalink)
Glad to see it's not just me.  I'm having the same fan issue as the others above as of updating driver to 457.09.
 
currently idleing, watching a youtube vod.  Fan 1 29%; Fan 2 29%; Fan 3 49%
Also, I do not have GeForce experience currently installed.  Nor do I have any other software (Afterburner for example) installed.
post edited by Bluedragonwolf - 2020/10/29 11:10:20
#72
oaqewado
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2018/09/24 06:54:04
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 13:37:39 (permalink)
Same here with new nvidia drivers 457.09 and 3080 XC3 Ultra
#73
KingEngineRevUp
FTW Member
  • Total Posts : 1030
  • Reward points : 0
  • Joined: 2019/03/28 16:38:54
  • Status: offline
  • Ribbons : 9
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 13:58:41 (permalink)
Anyone else having this issue with precision? It always sets PL to max with the XOC bios. Or is that more of the BIOs at fault? 
#74
ckenda1
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2007/09/16 11:11:54
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 16:25:24 (permalink)
https://www.nvidia.com/en-us/geforce/forums/game-ready-drivers/13/405163/geforce-45709-game-ready-driver-feedback-thread-re/2861112/
 
It's being looked into.  For now you can roll back to the 456.98 driver if it causes an issue.
#75
sam22788
New Member
  • Total Posts : 30
  • Reward points : 0
  • Joined: 2011/01/16 22:05:19
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/29 20:36:45 (permalink)
Same for me as well, on 457.09 and 3080 XC3 Ultra.
 
#76
rancel21342
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/09/04 22:20:59
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 07:57:23 (permalink)
notarjy
Delwyn69
Can anybody run the OC scanner successfully? I'm scared to use it now because it completely crashed the pc the very first time I used it with the older version...


As I stated earlier, my first oc scan attempt caused a reboot. Since then every scan attempt has been completed successfully. I had this same behavior with 1.1.0.9, not sure why the first attempt is bugged.


I seem to be having reboot issues every time I try to run OC Tool. Right at about 30% my computer just shuts down and reboots. I have an 850w GA and EVGA thinks it may be something to do with the power supply. Waiting on a replacement to confirm if this is the fix. I wouldn’t care about the OC Scan, however I’m also experiencing crashing in games and think it’s either a driver issue or an issue with my PSU due to the random reboots when it is boosting/full load
#77
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6916
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 76
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 08:13:26 (permalink)
rancel21342
notarjy
Delwyn69
Can anybody run the OC scanner successfully? I'm scared to use it now because it completely crashed the pc the very first time I used it with the older version...


As I stated earlier, my first oc scan attempt caused a reboot. Since then every scan attempt has been completed successfully. I had this same behavior with 1.1.0.9, not sure why the first attempt is bugged.


I seem to be having reboot issues every time I try to run OC Tool. Right at about 30% my computer just shuts down and reboots. I have an 850w GA and EVGA thinks it may be something to do with the power supply. Waiting on a replacement to confirm if this is the fix. I wouldn’t care about the OC Scan, however I’m also experiencing crashing in games and think it’s either a driver issue or an issue with my PSU due to the random reboots when it is boosting/full load


750 and 850 GAs are known problem PSUs for the 3080/3090. EVGA did say that they were testing it, but several users have swapped from GAs and that fixed their crashing/reboots.
#78
rancel21342
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/09/04 22:20:59
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 08:34:02 (permalink)
arestavo
rancel21342
notarjy
Delwyn69
Can anybody run the OC scanner successfully? I'm scared to use it now because it completely crashed the pc the very first time I used it with the older version...


As I stated earlier, my first oc scan attempt caused a reboot. Since then every scan attempt has been completed successfully. I had this same behavior with 1.1.0.9, not sure why the first attempt is bugged.


I seem to be having reboot issues every time I try to run OC Tool. Right at about 30% my computer just shuts down and reboots. I have an 850w GA and EVGA thinks it may be something to do with the power supply. Waiting on a replacement to confirm if this is the fix. I wouldn’t care about the OC Scan, however I’m also experiencing crashing in games and think it’s either a driver issue or an issue with my PSU due to the random reboots when it is boosting/full load


750 and 850 GAs are known problem PSUs for the 3080/3090. EVGA did say that they were testing it, but several users have swapped from GAs and that fixed their crashing/reboots.


I’m 100% positive it is a PSU issue for me at least. After crashing over and over i just tried lowering the power limit to 90% and the OC scanner finished successfully for the first time.

Luckily EVGA did approve an RMA for a replacement it just hasn’t shown up yet. It’s a bummer because I bought my 850w GA about 45 days ago in anticipation of 3080. Guess I bought the wrong one lol. But EVGA has been fantastic.
Now just waiting for them to ship it so I can game again without fear of crashing before reaching a save point.
#79
joedangelo13
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2020/10/06 05:20:55
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 09:52:57 (permalink)
For some reason my fan 3 is running at the proper speed for the temperature I set in my fan curve, but fans 1 and 2 are not?

 
#80
arestavo
CLASSIFIED ULTRA Member
  • Total Posts : 6916
  • Reward points : 0
  • Joined: 2008/02/06 06:58:57
  • Location: Through the Scary Door
  • Status: offline
  • Ribbons : 76
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 10:00:45 (permalink)
joedangelo13
For some reason my fan 3 is running at the proper speed for the temperature I set in my fan curve, but fans 1 and 2 are not?




Scroll up, multiple reports of the same with EVGA acknowledging it.

Install 456.71 or 456.98 to fix it for now.
#81
jsnyder82
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2009/04/23 11:42:00
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 13:17:00 (permalink)
joedangelo13
For some reason my fan 3 is running at the proper speed for the temperature I set in my fan curve, but fans 1 and 2 are not?




Yep, same exact thing here with my 3080 FTW3 Ultra. My fan 3 will always run at whatever speed I tell it, but fans 1 and 2 won't even turn on until I slide it past 30%, and even then the speeds are much slower than the speeds I set them to.
 
But apparently it's a driver issue and EVGA are aware, as are Nvidia.
#82
notarjy
Superclocked Member
  • Total Posts : 178
  • Reward points : 0
  • Joined: 2020/09/01 15:16:33
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 13:38:05 (permalink)
I wonder if the fix will be a new driver update or an update to PX1. I have refrained from updating my driver for now.

9700k @ 5.0Ghz 1.3v AVX0
EVGA RTX 3080 FTW3 Ultra
#83
Cornelius14
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2016/07/06 13:46:55
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 15:33:07 (permalink)
How do you guys get the voltage curve in PX1 to save? I cannot for the life of me do it. I’m able to run 1mv at 2085mhz and 500 on the ram with Afterburner, but I can’t replicate this in PX1.
#84
NexusPhase
iCX Member
  • Total Posts : 406
  • Reward points : 0
  • Joined: 2009/01/09 12:05:06
  • Status: offline
  • Ribbons : 3
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/30 15:41:51 (permalink)
chocmangue
Hi,
The nvidia driver 457.09 has broken the fan control in EVGA Precision X1 (1.1.0.11) for my EVGA 3080 FTW3 ULTRA.
At default, they all run at the same speed of 33%, no problem here.  But if I set a manual fan speed of for example 60% (linked or not linked doesn't matter), FAN1 and 2 will run at 43% whereas FAN3 runs at 60% like it's supposed to. When manually set to 80%, FAN1 and 2 run at 71% and the 3rd one at 80%.
The fan curve control also doesn't work properly.
I've tried reinstalling EVGA Precision X1, it didn't work, the only thing that fixed this issue was to revert back to the nvidia driver 456.98.
The firmware version is 2.1.1.4, the BIOS version is 94.02.26.80.9C (400W BIOS) and the switch is set to OC if that matters.

Delwyn69
I have notice a prossible problem, which consists of rather high cpu usage of 0.5-2%. Is this normal? I kinda feel this is a lot, since it doesn't go down even when minimized. Is it supposed to be like this?

I noticed the same thing (1-2% cpu usage) with the OSD, HWM, LED Sync and Boost Clock set to OFF.




Having the exact same issue with the fans and the new Nvidia driver

"Want some rye? Course ya do! Here's to us! Who's like us? Damn few, and they're all dead!"
 
CPU: 5900x
Cooler: Noctua NH-D15 Chromax
GPU: RTX 3080 FTW Ultra
Mobo: Asus TUF gamming x570-Plus
Mem: G-Skill 2x16gb c16 3600mhz
Storage: 1tb 980 pro M.2, 1tb 970 pro M.2
PSU: Corsair AX1200
Case: Danger Den Torture Rack
 
 
#85
fofal
New Member
  • Total Posts : 88
  • Reward points : 0
  • Joined: 2007/11/11 11:15:02
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/31 14:24:48 (permalink)
I tried to set the fans to 100% to see how much noise it makes but the settings I'm saving don't actually make the fans go 100%.

Maybe I'm doing it wrong but this software is really confusing.
I like afterburner for that reason. I wish I could use evga software. Software updates and led control.
#86
dorioo
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2020/10/31 14:09:34
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/10/31 14:44:01 (permalink)
Thank you to those that reported this as the issue. I was freaking out that my card was somehow defective. 
 
While we wait for X1 or Nvidea to fix the issue, I've had some success using Afterburner's fan control to get all 3 fans to spin at the same RPM using a custom curve. 
#87
TheAngryIrishman
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2020/11/01 00:24:43
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/11/01 00:38:51 (permalink)
Can we get an audio visualizer added to the the LED options please.  All of my other leds in my case beat to music. 
#88
davecj82
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2012/06/27 12:13:25
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/11/01 03:21:59 (permalink)
Hello,
I really want to like this software and be able to ditch Afterburner completely, but there are two issues that are keeping me from doing so, both in the HWM.
 
1) No ability to monitor CPU temp or core clock that I'm able to find.  I recall this being in previous versions, so maybe this is an oversight?
2) No ability to change the colors of the temp readouts in the system tray.  For example, with Afterburner, my GPU temp is red and my CPU temp is light green in my system tray.  I've never seen this in any version, or maybe it's somewhere and I'm not seeing it?
 
If these two items are fixed, I will gladly say goodbye to Afterburner, as I like the layout of this software otherwise.  Thanks!
#89
michte
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2013/12/23 17:40:24
  • Status: offline
  • Ribbons : 0
Re: EVGA Precision X1 1.1.0.11 for 30/20 Series ONLY 2020/11/01 03:24:08 (permalink)
Well, I guess I should have read this thread before posting a lengthy post :) Same here with the broken fan control : 

CASE : Fractal Design Define S2 / PSU : Corsair AX-850W / CPU : AMD Ryzen 3900X / MB : Gigabyte Aorus X570 Elite / RAM : GSKILL DDR4 32GB Trident Z Neo 3600MHz CL16-19-19-39 1.35V / GPU : EVGA GeForce RTX 3080 FTW3 ULTRA GAMING / SSD : Samsung 970 EVO PLUS 250Go / SSD : Western Digital Black SN750 1To / SSD : Samsung 860 EVO 500Go / KB : Logitech G915 / MOUSE : Logitech Pro Wireless / MONITOR : LG 27GL850-B / MONITOR : LG OLED55C9PLA
#90
Page: < 1234 > Showing page 3 of 4
Jump to:
  • Back to Mobile