EVGA

Helpful ReplyEVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE!

Page: << < ..1112131415.. > >> Showing page 12 of 84
Author
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti K|NGP|N is HERE! 2019/04/13 07:06:12 (permalink)
skonkmonkey
I know there will be a hydro block, but im curious if it will be block only or will they sell actual hydro card?



From what's been said officially so far, only Hydro Copper sold separately in the May time frame but that all could change timing wise. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
HawkOculus
iCX Member
  • Total Posts : 456
  • Reward points : 0
  • Joined: 2019/04/10 10:50:51
  • Status: offline
  • Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 07:07:00 (permalink)
dwexpress
My fans are 2 black fans on the radiator and a black dimple fan on the card itself, thats what is showing on the promo's as far as i can tell.




Ok, good to know. Same here with mine.
 
I played some Vermintide 2 with the new card this morning. This thing is a gaming BEAST!
 
I'll post some benchmark runs later this weekend. 
sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 07:13:49 (permalink)
Yeah i got 2 of these things, this is gonna take some serious configuration in a different tower or wait till the waterblocks get released, i guess i'll just use the one for now till i get my marbles together on how to do the build.




AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6502
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 12:47:47 (permalink)
dwexpress
Yeah i got 2 of these things, this is gonna take some serious configuration in a different tower or wait till the waterblocks get released, i guess i'll just use the one for now till i get my marbles together on how to do the build.


Make a bracket and mount the fans outside the case for the time being.

I'd atleast test both cards. You can only get a new card back from rma within 30 days of purchase. Dont wait unless your fine with a used refurbished card.

$1800+ for a used card would really bite.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
degenerate
SSC Member
  • Total Posts : 614
  • Reward points : 0
  • Joined: 2013/08/23 05:38:31
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 13:28:20 (permalink)
HawkOculus
What fans did you guys end up with? My fans look different than the ones they were using for the promotional material. Last minute change in what shipped with these cards?
 
I'll be continuing to tinker with mine this weekend. Really happy with it so far. 



Black EVGA fans that I immediately replaced with Noctua NF-A12x25.


 
|5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
Deficatus
New Member
  • Total Posts : 15
  • Reward points : 0
  • Joined: 2019/02/13 17:16:34
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 15:07:04 (permalink)
Has anyone tried the stress test on RealBench? After installing the Kingpin card with current Nvidia driver and X1 I get an immediate fail "instability Detected(Luxmark)". The benchmark runs fine, and I did run DDU before installation. Is this just perhaps a driver issue with Nvidia? This is the first time I have owned an Nvidia GPU since The Geforce 3 was released after they acquired 3Dfx.
 
Other then that I am pretty impressed and look forward to unlocking it's secrets over the next week.
bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 15:29:10 (permalink)
Deficatus
Has anyone tried the stress test on RealBench? After installing the Kingpin card with current Nvidia driver and X1 I get an immediate fail "instability Detected(Luxmark)". The benchmark runs fine, and I did run DDU before installation. Is this just perhaps a driver issue with Nvidia? This is the first time I have owned an Nvidia GPU since The Geforce 3 was released after they acquired 3Dfx.
 
Other then that I am pretty impressed and look forward to unlocking it's secrets over the next week.


This? RealBench | ROG - Republic of Gamers Global - Asus if so it is 3 Year Old Now!
 
A new version of RealBench v2.43 (Jan 28, 2016) is now available for download. (Downloading Now and will Run It and Report Back)
Here are the improvements made to this new version: 
  • Support for the latest hardware, including new LGA 1151 motherboards
  • Reduced benchmark time to around 5 minutes to allow users spend more time on system tweaks
  • Upgraded and optimized different tests in the benchmarks
If you want to learn more about RealBench, a free benchmark service, you can have a look at the FAQ and at the Benchmarking & Stress Test Insights.
If you are looking for tips, check out the Realbench official thread or go directly to the ROG forum
 
First Run BSOD 133 Bug Check ((( Note this uses AVX so make sure your Bios is setup up for it. )))
                                                                                        (Video Encoding is a Killer on the CPU)

 
Found a newer version than above https://hwbot.org/benchmark/realbench_hwbot_version/  HWbot_RealBench_v2.44
Found a newer version than above https://www.majorgeeks.com/files/details/asus_realbench.html  RealBench_v2.56
Running 2.56 with my Settings.

 
I Do Not Recommend this Tool.
Also It seem to be just be a Big AD for ASUS IMO.
No real use for our EVGA GeForce RTX 2080 Ti K|NGP|N GAMING, 11G-P4-2589-KR, 11GB GDDR6, iCX2 & OLED Graphics Cards.
post edited by bcavnaugh - 2019/04/13 17:33:02

Attached Image(s)


Associate Code: 9E88QK5L7811G3H


 
sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 15:40:43 (permalink)
AHowes
dwexpress
Yeah i got 2 of these things, this is gonna take some serious configuration in a different tower or wait till the waterblocks get released, i guess i'll just use the one for now till i get my marbles together on how to do the build.


Make a bracket and mount the fans outside the case for the time being.

I'd atleast test both cards. You can only get a new card back from rma within 30 days of purchase. Dont wait unless your fine with a used refurbished card.

$1800+ for a used card would really bite.



Well i have been doing quite a bit of messing around today and now have everything switched over to a different case with plenty of room for both cards now. Computer is just now up and running again with the single card. Ended up switching over to an Obsidian 900D Super Tower. The second card will go on the left side of the case in the same position as the one on the right side of the case.
post edited by dwexpress - 2019/04/13 16:17:27

Attached Image(s)





GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 15:41:49 (permalink)
 
I know this might sound silly but is this 'RealBench' strictly for Asus products or open to all for benching?  I've never heard of this bench before is why I ask. Going through the FAQs page didn't tell me anything I'm asking so if anyone knows that'd be great.

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24079
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:11:31 (permalink)
GTXJackBauer
Ā 
I know this might sound silly but is this 'RealBench' strictly for Asus products or open to all for benching?Ā  I've never heard of this bench before is why I ask. Going through the FAQs page didn't tell me anything I'm asking so if anyone knows that'd be great.


RealBench is for all cards. It is just branded Asus.
bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:26:00 (permalink)
@dwexpress  
Not the Best or Recommended place to install the Radiator


Associate Code: 9E88QK5L7811G3H


 
sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:38:04 (permalink)
bcavnaugh
@dwexpress  
Not the Best or Recommended place to install the Radiator



Not to much can do about it, hoses are not long enough to reach the front of case, even if it went up top the second radiator has to go somewhere, can't put it on back either. It will have to do until the Hydro Blocks come out. I'll install the second one tomorrow and start doing benchmarks but to me the cooling should be the same whether it be front, back, or side. Theres plenty of air flow throught this case.




GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10333
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:38:18 (permalink)
dwexpress
 
Well i have been doing quite a bit of messing around today and now have everything switched over to a different case with plenty of room for both cards now. Computer is just now up and running again with the single card. Ended up switching over to an Obsidian 900D Super Tower. The second card will go on the left side of the case in the same position as the one on the right side of the case.




Super tower is right with ample room for anything.  My only issue with this massive case is moving it for maintenance.   
 
Glad to see those tubes are long enough for the lower chamber.  

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
rodarkone
New Member
  • Total Posts : 64
  • Reward points : 0
  • Joined: 2016/02/02 12:56:57
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:39:25 (permalink)
@dwexpress
 
I was about to say the same, naturally now the watter is down in the radiator tank and all the air is in your pump. Can't you rotate the top rad by 180 degreese and move the radiator of the AIO where the case exhaust fan is ? 
post edited by rodarkone - 2019/04/13 16:42:09
sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:50:05 (permalink)
No there is not enough room to put it on the back of the case. But then still once the second card is installed still have the same problem thats why i decided to try and put them both on the bottom. With full air flow vents on the bottom, 3 front fans pulling in the air flow should be good i think. Plus since the bottom has more room i can even add a couple more case fans on the bottom to pull air into the case.

Attached Image(s)





bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 16:55:13 (permalink)
dwexpress
bcavnaugh
@dwexpress  
Not the Best or Recommended place to install the Radiator



Not to much can do about it, hoses are not long enough to reach the front of case, even if it went up top the second radiator has to go somewhere, can't put it on back either. It will have to do until the Hydro Blocks come out. I'll install the second one tomorrow and start doing benchmarks but to me the cooling should be the same whether it be front, back, or side. Theres plenty of air flow throught this case.

I just ordered 4 of them.
http://www.performance-pcs.com/radiator-accessories/phobya-120x120x20mm-radiator-shroud-plexi.html

Be carful where you buy them 16.49 +$39.99 Shipping Germany Charges a LOT for Shipping to the US from Newegg


post edited by bcavnaugh - 2019/04/13 17:06:57

Associate Code: 9E88QK5L7811G3H


 
AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6502
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 17:34:56 (permalink)
Just gut an old useless 120mm fan and use that for a shroud. ;) the wider the better for a pull fan as a pull fan can be load with nothing.. need more then 1/4" gap to quiet a pull fan.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
richiec77
New Member
  • Total Posts : 53
  • Reward points : 0
  • Joined: 2014/10/28 19:36:52
  • Location: Lone Star
  • Status: offline
  • Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 20:59:55 (permalink)
Cards been amazing for benching as is Stock with voltage tweaks. Been as high as 2310 passing GT1 and GT2 in Firestrike. Unfortunately crashed at Combined. Best overall stable full run was at 2280. FS doesn't load the GPU up as hard as TS/FSE/FSU. So you can push just a tad more. 
 
https://www.3dmark.com/fs/19051176
 
Was testing outside in the garage where it's 45F. GPU temps would get near 29/30C and that's a tripping point in the Algorithm. Pulling the AIO and using a waterblock with a chiller I'm pretty sure I can get to 2325-2340. Which is nutty for not using DICE/LN2. 
 
In a week or 2 we'll see how it does on DICE and then LN2. So far it's a very stout card with good control already. 
mattlissy9297
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/09/09 10:59:54
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:00:57 (permalink)
My Kingpin is very running well. 
Started off running +150 Core(Boost 1175Mhz) and +1200(8200)on the memory. Was running only Time Spy Extreme(4K). To quick of a run to truly call it stable. 
So, ran Time Spy extreme Stress test and froze up about 7 minutes into the run. Backed the core down to +145(Boost 1160 now) and ran like a champ. Got me thinking, let's see how far a can push the memory.
 
Guys, this memory is a freak show. Running +1500 (8500). That's 17000 Effective! Yes, my time spy score scaled up with the memory bump. With my case side cover off my temps run 48C - 51C with fans at 100%. 
Hope these quick numbers helps someone.
 
 
bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:02:26 (permalink)
mattlissy9297
My Kingpin is very running well. 
Started off running +150 Core(Boost 1175Mhz) and +1200(8200)on the memory. Was running only Time Spy Extreme(4K). To quick of a run to truly call it stable. 
So, ran Time Spy extreme Stress test and froze up about 7 minutes into the run. Backed the core down to +145(Boost 1160 now) and ran like a champ. Got me thinking, let's see how far a can push the memory.
 
Guys, this memory is a freak show. Running +1500 (8500). That's 17000 Effective! Yes, my time spy score scaled up with the memory bump. With my case side cover off my temps run 48C - 51C with fans at 100%. 
Hope these quick numbers helps someone.


Post your Benchmark Score, just leave off the https://

Associate Code: 9E88QK5L7811G3H


 
bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:04:34 (permalink)
richiec77
Cards been amazing for benching as is Stock with voltage tweaks. Been as high as 2310 passing GT1 and GT2 in Firestrike. Unfortunately crashed at Combined. Best overall stable full run was at 2280. FS doesn't load the GPU up as hard as TS/FSE/FSU. So you can push just a tad more. 
 
https://www.3dmark.com/fs/19051176
 
Was testing outside in the garage where it's 45F. GPU temps would get near 29/30C and that's a tripping point in the Algorithm. Pulling the AIO and using a waterblock with a chiller I'm pretty sure I can get to 2325-2340. Which is nutty for not using DICE/LN2. 
 
In a week or 2 we'll see how it does on DICE and then LN2. So far it's a very stout card with good control already. 

Nice Score, https://www.3dmark.com/compare/fs/19051176/fs/19050915 Kicks my rear end.
2,280 MHz -v- 2,190 MHz

Associate Code: 9E88QK5L7811G3H


 
richiec77
New Member
  • Total Posts : 53
  • Reward points : 0
  • Joined: 2014/10/28 19:36:52
  • Location: Lone Star
  • Status: offline
  • Ribbons : 1
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:08:53 (permalink)
Tweaking takes a while. The GPU side is sped up by the 9900K being a ring bus vs the 7920x which is mesh. But that's a strong OC on your 7920x.
 
Memory also plays a strong roll in getting it up to speed. Really wish I could have figured out the stripping needed to get the DanCop profile to run and allowing TS to load. If it's under 2.8GB RAM, can't load the benchmark. 
 
Took a while to find a 2080 Ti I could tweak to pass up the Titan V.
mattlissy9297
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/09/09 10:59:54
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:10:17 (permalink)
3dmark.com/3dm/35380828
 
Here it is. 
+145 Core (Boost 1160)
+1500 Memory (17000 Effective)
 
May push the memory a little more tomorrow. Looking at everybody's 3dmark numbers, 1125 base memory clock is about as high as its gets.
post edited by mattlissy9297 - 2019/04/13 21:17:56
Zeddivile
SSC Member
  • Total Posts : 761
  • Reward points : 0
  • Joined: 2017/09/30 11:15:15
  • Location: @ the tipity top of FPS mountain
  • Status: offline
  • Ribbons : 7
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:12:09 (permalink)
I stopped at 2190 and 1150. 2080ti KPE was stable but I decided to wait for the Hydro Copper and a case swap before I really dig in.
 
 DB900V2 is not the right case for this build ;o(
 
edited for link - https://www.3dmark.com/3dm/35321914?
post edited by Zeddivile - 2019/04/13 21:44:32

"This stuff breaks my tiny often dehydrated and carb deprived hamster brain" -2019
  

 

bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:15:30 (permalink)
mattlissy9297
3dmark.com/3dm/35380828
 
Here it is. 
+145 Core (Boost 1160)
+1500 Memory (17000 Effective)

https://www.3dmark.com/spy/6905958 
https://www.3dmark.com/compare/spy/6905958/spy/6895707

Associate Code: 9E88QK5L7811G3H


 
mattlissy9297
New Member
  • Total Posts : 11
  • Reward points : 0
  • Joined: 2018/09/09 10:59:54
  • Status: offline
  • Ribbons : 0
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/13 21:24:31 (permalink)
 
Thanks bcavnaugh for the compare. Looks like my memory did scale well. 
Nice score yourself.
sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/14 03:25:38 (permalink)
Time Spy Extreme HOF #31   http://www.3dmark.com/spy/6898321
 




sparetimepc
CLASSIFIED Member
  • Total Posts : 2413
  • Reward points : 0
  • Joined: 2009/11/13 09:24:09
  • Location: Altona, IL
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/14 05:54:42 (permalink)
Oh gosh, just got my other kingpin installed and can't even sli it yet. My previous board was the Asus Rampage VI Apex and when it went in to be RMA'd i ended up getting the Asus Rampage VI Extreme Omega to replace it. I had the nvlink 4 space while using the Apex now i didn't even notice till now the Omega needs the 3 space nvlink. Ughhhhh.




AHowes
CLASSIFIED ULTRA Member
  • Total Posts : 6502
  • Reward points : 0
  • Joined: 2005/09/20 15:38:10
  • Location: Macomb MI
  • Status: offline
  • Ribbons : 27
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/14 08:39:53 (permalink)
dwexpress
Oh gosh, just got my other kingpin installed and can't even sli it yet. My previous board was the Asus Rampage VI Apex and when it went in to be RMA'd i ended up getting the Asus Rampage VI Extreme Omega to replace it. I had the nvlink 4 space while using the Apex now i didn't even notice till now the Omega needs the 3 space nvlink. Ughhhhh.


That's gota hurt!

Hopefully ya got a microcenter or frys near by and can get one locally.

Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
Asus Z390 ROG Extreme XI MB
G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
bcavnaugh
The Crunchinator
  • Total Posts : 38516
  • Reward points : 0
  • Joined: 2012/09/18 17:31:18
  • Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
  • Status: offline
  • Ribbons : 282
Re: EVGA NVIDIA GeForce RTX 2080 Ti KINGPIN is HERE! 2019/04/14 11:26:23 (permalink)
rodarkone
ehh .. is easy to find what I am talking - just go to any of your results / click on show result details / then click on the colums (this will filter scores by the same system CPU + GPU) then just cliick on number of GPU's = 1 .. and the scores will be:
 
RESULTS 242 RESULTS FOUND.
DISPLAYING 87 RESULTS:
 
1. 29497 Fire Strike (1.1) by masamune.dono
March 15 2019
Intel Core i9-7920X Processor (2,900 MHz)
Details
NVidia Corporation NVIDIA GeForce RTX 2080 Ti (2,130 MHz)
Add to compare
 
2. 29417
Fire Strike (1.1) by bcavnaugh
April 12 2019
X299-Dark-RTX-K|NGP|N
Intel Core i9-7920X Processor (2,900 MHz)
Details
EVGA Corporation NVIDIA GeForce RTX 2080 Ti (2,175 MHz)
Add to compare
 
3. 29387
Fire Strike (1.1) by rodarkone
April 13 2019
Intel Core i9-7920X Processor (2,900 MHz)
Details
EVGA Corporation NVIDIA GeForce RTX 2080 Ti (2,175 MHz)
Add to compare

Thanks for this Info, Reviewing Now.
post edited by bcavnaugh - 2019/04/14 12:32:15

Associate Code: 9E88QK5L7811G3H


 
Page: << < ..1112131415.. > >> Showing page 12 of 84
Jump to:
  • Back to Mobile