er557Hi @Sajin, sorry to necro this thread but it seems applicable still,Have two 6183 KR in SLI (1080 SC acx 3.0), on stock clocks and stock settings in XOC. The bioses are updated for the pwm temp fan fix and the nvidia display port fix. I used to run them overclocked but sometimes in games it would reboot so I have set back to stock. They also boost fine but get quite hot up to max temp target, as my ventilation is not top notch.Would I have any benefit from crossflashing to 11gpbs bios, or to say zotac amp extreme for less power envelope restrictions, or even the asus strix unlocked patched bios with no limits?I rather stay on the safe side, but have seen guides here that prove those can work. What about my fans and their control, will it be compatible. Maybe I should avoid adventures altogether?
KingStyleIn GPU-Z my SC2 shows 86.02.39.00.90. I've run 6583 but it doesnt seem to update to the newest unless I am reading this incorrectly.
SajinKingStyleIn GPU-Z my SC2 shows 86.02.39.00.90. I've run 6583 but it doesnt seem to update to the newest unless I am reading this incorrectly.Did you run the .exe as admin?
KingStyleAlso my memory in GPU-Z shows 1376 default, do I even need to to this?
Je RealizzeHello everyone! I try to flash my 1080 FTW2 DT with this bios... the utility runs, emits two beeps and closed. After reboot gpu-z shows old BIOS version and memory clock is 1251. Any ideas?
SajinDid you run it as an admin?
SajinTry again, but this time shutdown your pc and uplug the power from the wall for 5 minutes then replug the system back into the wall, and start it up. See if that helps.
Je RealizzeSajinAfter.I did like you said. But still no changes...
Sajin In that case you should just use nvflash to try and update the card. Here is the salve vbios for your card... https://www.techpowerup.com/vgabios/191610/191610 Note: You'll need to use the -6 command when flashing. You'll also need to have the slave vbios selected before flashing.
SajinTry this one... https://www.techpowerup.com/vgabios/198856/198856
Je RealizzeSajinTry this one... It works! Thanks a lot! You're awesome
SajinTry this one...
hlsilvaSajinTry this one... This one works for mine GTX1080 FTW2 DT ICX 08G-P4-6684-KR. Thank you!
SajinTry this one...
wriceth Hi, i have a ftw2 dt 08G-P4-6684-KRcan i update a bios with more core clock and keep my 1376mhz on mem? ty THX for all
Digital_FuzionIt's interesting to know there is a BIOS update for the aging 1080 FTW2 and SC2 I hope EVGA releases a last and final optional BIOS update for the 1080 Ti FTW3 series.
the_Scarlet_oneDigital_FuzionIt's interesting to know there is a BIOS update for the aging 1080 FTW2 and SC2 I hope EVGA releases a last and final optional BIOS update for the 1080 Ti FTW3 series. It’s best to refer back to post 1. This BIOS is almost a full 3 years old now. This was done when the cards were still “relevant” and hadn’t gone EOL. It is unlikely that many manufacturers will update the bios’ that are available after such a long time.