Chris21010
best of luck finding a TV big enough to match.

It's not hard to find a big TV these days lol. All of the TV manufacturers keep on making them bigger and bigger.

ManBearPigI still use a Blu-ray drive because it has much better quality. I guess if you still have a standard definition TV or have bad eye sight you wouldn't mind the sub par picture of streaming.  But for those that have a nice setup and good eye sight, Blu-ray is the only way to go.

Plenty of ways to get your hands on a digital copy of a bluray.
You can download a copy when you have an original, its legal.

Sokonomi
You can download a copy when you have an original, its legal.

technically not true, it is legal to make your own copies but not legal to own someone elses copy. even if you do own the media in question.

they just make sure there are laws in place so that they can go after anyone at anytime when they feel like there needs to be another public event on pirating stuff.

I can see that they now added a shipping cost to my preorder of the DG87 but I do not see a way to pay for it. Does anyone know how? I cant find a button lol

Slimshiesty

troopergr
I can see that they now added a shipping cost to my preorder of the DG87 but I do not see a way to pay for it. Does anyone know how? I cant find a button lol

If you pre ordered, then you used a credit card to do it... shipping will automatically be charged to your card along with the price of the case.

I used paypal, and it has not tried to charge me yet.

troopergr

Slimshiesty

troopergr
I can see that they now added a shipping cost to my preorder of the DG87 but I do not see a way to pay for it. Does anyone know how? I cant find a button lol

If you pre ordered, then you used a credit card to do it... shipping will automatically be charged to your card along with the price of the case.

I used paypal, and it has not tried to charge me yet.

Didnt realize you had used paypal, my bad.. I had that happen to me once before, it updated and charged me a few days later... after my item had shipped.

Same here, the Netherlands.
Simple paypal link, all good to go now. ;)
Load off my mind.

I wonder if its really going to be sent by UPS though, I had a bad experience with these guys before.
They marked my parcel as "nobody home" on the tracker site, but my security camera never saw them try.
Funny part is my door is the entrance to my shop which is always open during UPS delivery hours.
So they flat out bull****ted me. :')
 
Did any of you who already got their case get a tracking number or something?

I'm new to watercooling what kind of reservoir are you guys going to use,  I am currently looking at the alphacool  light tower pump combo. Also looking to get two 420 radiators from them as well but not sure on the thickness as I would like to do a push pull configuration.     

Just got my DG-85. My Be Quiet! Pure Wings 2 fans' screws are too thick and won't fit in the rear (or "left") screw holes. Does anyone know which screws I should get? The once provided are not quite long enough to penetrate my fan and the case's screw holes.
 
Thank you in advance

Sokonomi
What would be the best watercooling setup for this case?
Is it worth bothering with push/pull if I go for dual 420 radiators?
I'm going to start with CPU, GPU, and Motherboard, with a second GPU down the line.
 
I'm also wondering if I should grab one of those EK 150mm res/pump combos,
or if I should sacrifice a HDD cage for a separate more fancy PWM pump.
Pressure is another thing I might have to watch for with such a large loop?

The EK pump combo's use the exact same pumps as the stand alone the difference is the pump top allows the reservoirs can be mounted as 1 unit it's all about your preference

Sokonomi

vormicia

Sokonomi
What would be the best watercooling setup for this case?
Is it worth bothering with push/pull if I go for dual 420 radiators?
I'm going to start with CPU, GPU, and Motherboard, with a second GPU down the line.

I'm also wondering if I should grab one of those EK 150mm res/pump combos,
or if I should sacrifice a HDD cage for a separate more fancy PWM pump.
Pressure is another thing I might have to watch for with such a large loop?

The EK pump combo's use the exact same pumps as the stand alone the difference is the pump top allows the reservoirs can be mounted as 1 unit it's all about your preference

I thought the combo ones were volt controlled, and the separate ones had the option for PWM?
Granted, I dont think having a pump on vario-speed is useful, but I thought there were other merits to it as well.
If the top is really all there is to it, I might as well just get the combo, provided the mount can facilitate.
It was designed with EK in mind, right?

Look at EK-XRES 140 Revo D5 PWM (incl. pump) from EK it's every thing you need as far as pump/reservoirs

Sokonomi

vormiciaLook at EK-XRES 140 Revo D5 PWM (incl. pump) from EK it's every thing you need as far as pump/reservoirs

Right, but look at the mount plate, I dont think the reservoir bracket accommodates for this?
Or can you just leave that EK bracket off, mount it to the case by the reservoir and leave the pump dangling underneath?

I wont Lie I personally think there is definitely going to be issues with mounting. I have an EK 250 reservoir and i bought the pump/top combo separately ( https://www.ekwb.com/shop/ek-xtop-revo-d5-pwm-incl-pump) which a different pump top and it took me a while to figure out how i was going to do this without drilling any holes in my brand new DG 87 LOL
 
So what i came up with was using one of the HD cages to mount the pump in there (which was EVGA's plan for us to be able to do because the HD sliding mounts have holes marked as pump) but unfortunately they don't line up with that bracket and even if i drill holes that do fit, the pump is too big with a fitting to make it work so i will be cutting a large square piece from the top of the cage for clearance to mount the fitting and cutting out one of the side rails for the intake to feed in. Its quite a bit of modding i wasn't planning on but this way there wont be any voiding of warranty since no modding has been done to the actual case itself.
 
I will definitely be looking forward to seeing other peoples custom loops to see what they did. I plan to take pics as i progress in my build and but the cost is ramping up and up so only able to purchase a few components at a time (otherwise wife will catch on to what i'm doing muhahaha)

My order is currently on:

Order Status: Pending Verification

And when I go into my order ID:

Order Status: Awaiting Approval

Is this anything to worry about?