xeonite
Superclocked Member
- Total Posts : 221
- Reward points : 0
- Joined: 2010/04/06 18:57:27
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/06 20:03:00
(permalink)
Wow you are right, it certainly seems to simply be the Pinnacle 24 from Mountains Mods, except at double the price.. LOL ... expensive gamepc sticker.... (300$ for that...)
Rig: ASUS P6T6 WS Revolution - i7 920 (C0) @ 3,8 Ghz - 6 Gb Corsair DDR3-1600 - GTX 285 Upcoming Rig: EVGA SR-2 - Dual X5650s @ ~ 4 Ghz - 24 Gb G.Skill DDR3-2000 - 2x GTX 460 FTW
|
sargatanas
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2008/03/29 03:28:26
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/07 08:24:10
(permalink)
i have 2 of the mountainmod htpx trays.
so if anybody wants me to check something, like distance and spacer location, just tell me
|
bigbrag
FTW Member
- Total Posts : 1213
- Reward points : 0
- Joined: 2010/01/24 13:03:17
- Status: offline
- Ribbons : 13
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/07 08:46:54
(permalink)
Does anyone know how long it takes MountainMods to build a case? I'm still waiting for mine and they haven't said a word since I ordered it  . I went with MountainMods because it was my only option and I would sure hate for the SR-2 to come in stock and arrive before my case does. Then I would just be tormented by even more waiting! 
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 11559
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
|
geort45
iCX Member
- Total Posts : 477
- Reward points : 0
- Joined: 2010/04/06 16:06:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/07 10:48:48
(permalink)
|
geort45
iCX Member
- Total Posts : 477
- Reward points : 0
- Joined: 2010/04/06 16:06:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/07 10:52:52
(permalink)
Hmmm I didn't notice before... I did read the mobo required a case with 10 slots but I didn't think it was because there was a vertical offset of where the PCIe slots start... so if I were to miraculously fit it in a case with 7 slots I'd only be able to use the first 4 slots LOL, well unless I use the rest for other things that don't need to connect to the outside like a raid card...
Darn!
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/08 12:18:29
(permalink)
something seems strange. yes.. Shannon is loosing his mind. whatever does he mean?? 
post edited by nateman_doo - 2010/04/08 14:05:09
|
_ShannonR
iCX Member
- Total Posts : 438
- Reward points : 0
- Joined: 2009/04/16 17:47:03
- Status: offline
- Ribbons : 2
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/08 13:17:17
(permalink)
nateman_doo
something seems strange.
forgive the "artist rendering" of what the back plate should look like to accommodate a 15" motherboard.
the SR2 tray only seems to be half a tray. I have the Standard on the left. A new tray should look "something" like my horrible drawings on the bottom.
*subscribed*
wow nate.... im glad i got to talk to you.... you were backward on this. 
ASUS Rampage IV Black Edition 3 Way TITAN Blacks TPX-1475 PSU LSI SSD RAID 4960X 5.0GHz on Water 64GB Patriot Viper 2400 Overclocking Graveyard Too many new chips to list.....980X I forget how high LN2,W3580 5.7 GHz 1.79V on LN2, W3520 4.9GHz 1.57V on LN2, E8600 5.9Ghz 1.68V on Dice, E8400 5.5Ghz 1.68V on Dice, Q6600 4.7Ghz 1.52V on Dice, Cel 430 4.2Ghz 1.62V on Dice
|
geort45
iCX Member
- Total Posts : 477
- Reward points : 0
- Joined: 2010/04/06 16:06:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/09 21:15:43
(permalink)
Just came back from measuring the interior of my case (cosmos 1000). Horizontally it has a little more than 15", and vertically it's missing 1" 1.6" but I just have to move the PSU a little to the side! So it'd be a YES to fit a SR2, woohoo  ! So I don't even NEED to mod the 5.25" racks, but I'll probably do it anyway to fix the Cosmos flaw of cabling behind the motherboard... Now if anyone could send me a SR2  ... even a prototype would be ok :P!
post edited by geort45 - 2010/04/09 23:23:39
|
The-Hunter
Superclocked Member
- Total Posts : 233
- Reward points : 0
- Joined: 2009/03/02 11:22:57
- Status: offline
- Ribbons : 1
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/10 02:50:08
(permalink)
geort45
Just came back from measuring the interior of my case (cosmos 1000). Horizontally it has a little more than 15", and vertically it's missing 1" 1.6" but I just have to move the PSU a little to the side! So it'd be a YES to fit a SR2, woohoo ! So I don't even NEED to mod the 5.25" racks, but I'll probably do it anyway to fix the Cosmos flaw of cabling behind the motherboard...
Now if anyone could send me a SR2 ... even a prototype would be ok :P!
want to take a picture of two, and describe that what you want to do with some awesome paint art, a box and a arrow or two? - there is a lot of people with that case that should be interested
Cosmos II water cooled, EVGA SR-X, Intel E5-2687W x2, EVGA Titan Black Hydrocopper signature x3, 1 x Dell 30" 308WFP, 96Gb 1600Mhz ram, Creative XB-X-FI, 256GB OCZ SSD, Storage controller: Areca 1222 in Raid 0 with 3 x, 2 TB Seagate HD, EVGA 1500W PSU __________________________________________________ 
|
geort45
iCX Member
- Total Posts : 477
- Reward points : 0
- Joined: 2010/04/06 16:06:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/10 19:07:27
(permalink)
Ok here's half of the deal, concerning the WIDTH of the mobo. I'll post another pic concerning the height of the mobo later.  That's a top view of what the tray on the Cosmos 1000 looks like (grey line). The green lines are the different mobo sizes. Normal ATX boards fit in the most raised part of the plate with the usual standoffs (orange). My mobo -SSI EEB 3.6- which is 13" in width uses a recessed portion of the plate using double standoffs (the holes were already there). Now for HTPX we reach almost the end of the plate, where the 5.25" racks begin. There's little clearance between the plate and the mobo, so there are 3 options: 1-(not shown)-Just put some kind of thin insulating material between the two pieces 2-Cut and mod the plate with another sheet of alu/steel so it extends horizontally and leaves more space for the mobo 3-Just cut the plate where the diagonal begins. The disadvantage of #3 is that you'd lose stability in that area of the mobo, and unfortunatelly that's the edge where the ATX power connector is so you'd have to press very gently. #2 would be the best but it'd require modding. Maybe users without much tools could just cut the unneeded portion of the panel and users with more tools could create the metal piece that'd be required to finish the mod and sell them. I'd probably just go with #1. Later!
|
syfer1987
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2010/02/26 06:44:15
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/11 03:18:42
(permalink)
Hi I am wondering will a thermaltakeusa Xaser VI cases not fit this as it has 10 pci slots not sure if it will fit can some one confirm this?
|
polkat
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2007/04/20 19:14:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/11 08:42:25
(permalink)
Well I have stopped caring about a case that fits, I'm just going to make my own. It may no look as good as a $350 Lian Li but it will work and for a lot cheaper, all I need is for the SR-2 to be made available.
|
thenjwaslike
Superclocked Member
- Total Posts : 229
- Reward points : 0
- Joined: 2010/03/18 19:49:15
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/11 10:02:36
(permalink)
polkat
Well I have stopped caring about a case that fits, I'm just going to make my own. It may no look as good as a $350 Lian Li but it will work and for a lot cheaper, all I need is for the SR-2 to be made available.
pc-p80 should be fine for air or water setup, the case has alot of room
jaden overclocked at 11months, 100% load 24/7, monkey stable. 
|
The Clock
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2010/04/11 11:26:14
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/11 11:44:24
(permalink)
Hi everyone, I am new here  The case I think SR-2 will easily fit in is Lian Li PC-343B ( http://www.overclock3d.ne...an_li_pc343_atx_case/1 ) I know it's kinda old but it's really big (515 x 458 x 460 mm, where 458mm=18.03 inches) and there is also room for a second PSU, which you may need. Please let me know what you think of this.
|
syfer1987
Superclocked Member
- Total Posts : 123
- Reward points : 0
- Joined: 2010/02/26 06:44:15
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/15 06:36:50
(permalink)
Hi ok so I will buy a Lian Li PC-P80 BUT where so I get the "NOTE: Requires 5 sticky-back plastic standoffs, more details on this soon" where do I buy them from??????????????? or should i go with mountainmods????
post edited by syfer1987 - 2010/04/15 06:43:42
|
polkat
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2007/04/20 19:14:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/15 09:51:42
(permalink)
Well all though it may not be as neat or be glamorous, it will be functional. I'm just going to mount the board into a file cabinet and cut some holes for the fans, cheap, functional and above all, available.
|
thenjwaslike
Superclocked Member
- Total Posts : 229
- Reward points : 0
- Joined: 2010/03/18 19:49:15
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/15 14:00:26
(permalink)
jaden overclocked at 11months, 100% load 24/7, monkey stable.
|
kelemvor
iCX Member
- Total Posts : 331
- Reward points : 0
- Joined: 2006/05/21 13:55:22
- Location: Largo, FL
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis'
2010/04/15 15:25:45
(permalink)
Gold Leader
EVGA should of stayed withing the E-ATX standards, it just flaws that you need another case to fit this mobo, it's not perfect because of the odd and unknown format, no socketed Bios chiips for full reliability of bios failures & bios chip replacements and lacking IPMI 2.0 support which is very recommended and highly wanted in the 2CPU world.
If it was E-ATX, like most 2CPU boards are; it would of been alot more useful and client friendly.
But now it has a format no which case has, it's kinda useless this way, unless there are cases that can really fit it without any modifications needed?
Sorry but this is something I rather evade hence of the important features it is missing ad it's odd format.
I hope EVGA will improve the ormat to E-ATX & ATX , a smaller one would be alot more interesting, like Supermicro's X8DAL3i:
My X8DAH+-F is going to be available cheap as soon as the SR2 goes up for sale. If you really want a standard xeon board, you'll have a chance to pick up a cheap one on ebay that's only 2 1/2 months old :)
|
polkat
New Member
- Total Posts : 15
- Reward points : 0
- Joined: 2007/04/20 19:14:22
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/18 07:27:51
(permalink)
Well I like to keep things as simple as possible, so this is the case I have chosen. I will cut some holes in the sides for 120mm fans and be done with all the will it fit problems.
Attached Image(s)
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
|
bigbrag
FTW Member
- Total Posts : 1213
- Reward points : 0
- Joined: 2010/01/24 13:03:17
- Status: offline
- Ribbons : 13
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 09:36:19
(permalink)
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 11:19:40
(permalink)
nice, mine shipped yesterday - what are you going to do with 5 video cards?
|
bigbrag
FTW Member
- Total Posts : 1213
- Reward points : 0
- Joined: 2010/01/24 13:03:17
- Status: offline
- Ribbons : 13
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 11:30:00
(permalink)
caguerrero
nice, mine shipped yesterday - what are you going to do with 5 video cards?
What case and options did you get? I need to get rid of the GTX 470's which is proving harder than I thought. If I return them, I have to pay a 15% stocking fee and if I sell them on ebay I still end of paying 15-20% in fees. I hate losing money! lol. Hopefully someone locally will want to pick them up.
|
stephan-as-ice
Superclocked Member
- Total Posts : 181
- Reward points : 0
- Joined: 2010/02/20 04:55:27
- Location: Germany
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 12:40:43
(permalink)
bigbrag. You're deconstructing the elements  Get a NEC Multisync 30inch screen before that is going to start off!
EVGA Classified SR-2 (A56)--- 2x EVGA GTX Titan ---2x Xeon 5650 ---2x Crucial M4 ---96GB Kingston Reg 1600 CL11 --- Corsair AX1200i 1200W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water --- NEC PA271W + Dell U2711
EVGA Classified SR-2 (A56)--- 1x EVGA GTX 680 ---2x Xeon 5650 ---1x Crucial M500 ---48GB Kingston Reg 1600 CL11 --- Corsair AX860i 860W --- LianLi AX75 --- MO-RA 3Pro --- all @ full water
|
caguerrero
iCX Member
- Total Posts : 262
- Reward points : 0
- Joined: 2007/12/19 19:00:38
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 15:44:57
(permalink)
I got the ascension extended in Anodized black with horizontal mount. Tri-something front, sides and top with windows. I was going to get 4 FTW GTX480's but i cant even manage to buy 1. bigbrag
caguerrero
nice, mine shipped yesterday - what are you going to do with 5 video cards?
What case and options did you get? I need to get rid of the GTX 470's which is proving harder than I thought. If I return them, I have to pay a 15% stocking fee and if I sell them on ebay I still end of paying 15-20% in fees. I hate losing money! lol. Hopefully someone locally will want to pick them up.
|
bigbrag
FTW Member
- Total Posts : 1213
- Reward points : 0
- Joined: 2010/01/24 13:03:17
- Status: offline
- Ribbons : 13
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/22 19:25:42
(permalink)
caguerrero
I got the ascension extended in Anodized black with horizontal mount. Tri-something front, sides and top with windows. I was going to get 4 FTW GTX480's but i cant even manage to buy 1.
bigbrag
caguerrero
nice, mine shipped yesterday - what are you going to do with 5 video cards?
What case and options did you get? I need to get rid of the GTX 470's which is proving harder than I thought. If I return them, I have to pay a 15% stocking fee and if I sell them on ebay I still end of paying 15-20% in fees. I hate losing money! lol. Hopefully someone locally will want to pick them up.
That will be an awesome build. I hope you find some gtx 480 FTW's. I heard they were pretty hard to come by. You could just get some regular 480's and waterblock them.
|
justaudie
New Member
- Total Posts : 17
- Reward points : 0
- Joined: 2008/09/14 09:28:43
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/04/30 13:20:30
(permalink)
This may have been mentioned before in this stream, and if so it only adds credence to the thought, but why not an EVGA "Special" case for this "Special" motherboard. Standard black and silver fare to start, but with some optional EVGA SR-2 markings and/or "Special" , and even custom, paint jobs. Hell, if you're going to have a rig with a motherboard of this stature, you may as well have (and probably can afford) a case to go with it that is designed specifically with the SR-2 in mind.
|
=TWP=WOLF
Superclocked Member
- Total Posts : 125
- Reward points : 0
- Joined: 2010/03/18 00:38:31
- Location: Sweden
- Status: offline
- Ribbons : 1
Re:EVGA Classified SR-2 Compatible Chassis
2010/05/01 17:24:13
(permalink)
It would be nice if EVGA made (as said) a Special EVGA Classified SR-2 Computer Case in Black Brushed Aluminum (like Corsair Obsidian Series™ 800D) with some nice EVGA Classified SR-2 tagging on. It's just for EVGA to design it and then make a good subcontract arrangement with Mountain Mods, if they don't plan to make it themselves.  That would be a real PR-Case for the EVGA Classified SR-2 Motherboard.  As far as it is for me, I'm going to stick to EVGA Products as much as I can.   WOLF
post edited by =TWP=WOLF - 2010/05/01 17:34:50
The WOLF is neither people's competitor nor his enemy. The WOLF is a fellow creature with whom the earth must be shared.
|
DarkSavior
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2009/08/17 11:09:40
- Status: offline
- Ribbons : 0
Re:EVGA Classified SR-2 Compatible Chassis
2010/05/02 15:34:53
(permalink)
Personally I am thinking of going with the p80. Its a nice case, roomy, good place for rads and so on.
However I am waiting it out, as I have a sneaking feeling a few case will pop up at some point around release (possibly why we don't have a solid ETA on release as it is). I'd love to see something a bit more affordable, not that I'm really complaining about MM or Lain Li they make great cases but given how much the setup is going to cost as it is saving $100 or so on a case would be nice. That is nearly the second set of ram, or a water block.
|