bcavnaugh

quadlatte

bcavnaugh

quadlatte

bcavnaugh

quadlatte
Would have like to seen control for all the mb fan headers in the software. Cant be that hard to add it.

What does that have to do with the EVGA CLC 120/280 Liquid CPU Coolers?
Corsair does not have MB Fan Header Control in Corsair Link, the equivalent of EVGA Liquid CPU Coolers EVGA Flow Control Software.
We have asked for this in their EVGA E-LEET Software as well and never went anywhere. So Best of Luck.

be cause with my h100i i can control 4 fans off it and it pulls power from a sata connector, and with link you can add nodes to control more fans and you have one nice interface to make changes and monitor everything, yes i know you can set the fans in the bios but why not bring that control to the desk top, asus, gigabyte msi all let you so why not evga? you usually pay a premium for evga products so i guess i just expect little more. 

A little off Topic but are you saying that your Corsair Link Controls your Motherboard Fan Headers?

No, i probably wont use them at all except the cpu one. The rest of them will go to either the 4 off my h100i or to the corsair mini commander. My point is since evga is now doing a clc with software controls then why not add control for all the pwm headers as well, a total solution type setup. How nice would it be to have one software interface to control your gpu, cpu cooler and fans? Maybe even integrate eleet into it for overclocking. Just seems to make sense to me.

MSim

quadlatte
 
be cause with my h100i i can control 4 fans off it and it pulls power from a sata connector, and with link you can add nodes to control more fans and you have one nice interface to make changes and monitor everything, yes i know you can set the fans in the bios but why not bring that control to the desk top, asus, gigabyte msi all let you so why not evga? you usually pay a premium for evga products so i guess i just expect little more. 

 
You bring up a valid point. Why doesn't EVGA have desktop software to control all the fans on it's motherboard like all the top mobo mfg do. People are paying a premium for evga motherboards but are receiving less features.

A good Topic for a New Thread under EVGA Software.
Maybe as part of EVGA E-LEET Software.

I would still like evga to say what the total draw of this with two fan and pump are pulling, i know the 270 manual states that a max of 1A is allowed on each fan header, and since the whole thing runs off one header that could be a issue, for example my h100i pulls a total of 1.7A with two fans and the pump at full speed, and if i add two more fans ( yes i realize the evga unit only has two fan connectors but someone use a pwm splitter ) that adds about another amp of draw.

Was reading that the NEW z270 motherboards:
The review said makers were using this small upgrade from the z170 to add some extra features.
 
For example one of the items, ( They said )  
 
the headers can differentiate between a water pump and high-speed,
PWM fan, and they support up to 2 amps per-header with built-in overcurrent protection.
 
 

Double Post.

Thanks for the update Cordorb  Note that this is a Beta Version
Same file for any version of Windows 32Bit or 64Bit
Driver Version: 2.0.0.2
Release Date: 2/17/2017
Driver File: Download
This  software is BETA and you may encounter some bugs, but this release has added the below features:

1. Add start minimized option
2. Add follow graphic mode to sync LED's
3. Add "i" icon for software information
4. Modify update path

quadlatte
will be interested to see what , if any, bugs come up. not a fan of being a beta tester, especially for important stuff like a cpu cooler.  

I remember all the bugs Corsair Link had when it first came out.

I still think the z270 MB BIOS is watching in the background and doing changes -- keeping me safe :-)
 
BUT now I can adjust pump speed ( or at least it seems so )

Master Jacob

Any update on when your EU store will be getting the CLC 280 back in stock?. I made a mistake and ordered one from SCAN UK as it was showing item due in 24 February, but they now can't confirm the date.

I am going to cancel and order directly from EVGA, like I should have in the first place.

RuffRyderInk

bcavnaugh
Thanks for the update Cordorb  Note that this is a Beta Version
Same file for any version of Windows 32Bit or 64Bit
Driver Version: 2.0.0.2
Release Date: 2/17/2017
Driver File: Download
This  software is BETA and you may encounter some bugs, but this release has added the below features:

1. Add start minimized option
2. Add follow graphic mode to sync LED's
3. Add "i" icon for software information
4. Modify update path

Sync Function with my EVGA 1070 FTW doesnt work.
Fan Curve automatically does not work.
I think here is something to do.
It Would be nice if the Water Software can be integrated to EVGA Precision X.
So u don`t have to use two programs for adjusting some things.

When will there be a final and working Version?
Is it possible to make a pull configuration with these  EVGA fans?

I have the same problems as your but don't forget this software is BETA not WHQL as we know there some bugs! Still wait for new software coming soon!!!
 
So u don`t have to use two programs for adjusting some things.
 
Sounds good!!! But....
If Cool Software go into EVGA precision X don't forget other peoples are using MSI Afterburner then they cannot use this software on MSI Afterburner!!! So that mean we have two programs either for graphics card and CPU cooler!!
 
Hope if that help 
 

Drivers and BIOS

OS: Windows 10 64bit
Driver Version: 2.0.0.3
Release Date: 2/28/2017
Driver File: Download

1. Fan slider follow current fan speed in fan curve mode.
2. Improve fan curve editor.
3. Remove "OK" button in fan curve editor.
4. Enable Setting=>TEMP Color=>CPU and Coolant range change.
5. Re-arrange TEMP Color=>CPU and Coolant , lower temp up, higher temp bottom. (Follow Precision XOC style)
6. Remove main UI double click to minimize function.
7. Remove icon shadow in taskbar when program closed.
8. Set CPU High performance, Pump & fan to full speed when KBoost on.
9. Reset fan mode when resume from S3.
10. Clear LED, pump & fan curve in default mode.
11. Remove link function on pump and fan.
12. Save LED status, fan speed and fan curve to profiles.
13. Fix wrong LED color when switch fan auto mode.
14. Fan curve support follow CPU temperature.
15. Fix Always on top to work as intended.
16. Add new function: 
      1.Start Minimized 
      2.Screen Capture Hotkey 
      3.Follow Graphics Card 
      4.Show User Interface Hint Icons 
      5.Show User Interface Tools Tips 
      6."i" information
17. Double click hardware graph brings up all hardware monitor graphs in a separate window 

 

Cordorb
Trying the new version (Driver Version: 2.0.0.3)
 
While folding tonight I could not get the program out of the minimized state in the task bar ( windows-10)
 
Yeah I got same!!!!
 
resource CPUWB.exe CPU water Block was taking 12 % average cpu.
 
My is about 0.2 %
 
After ending task and restart program - the program did not have CPU temp date. I am sure a re-boot will fix but want to wait for folding to finish.
 
---------------- edit adding-------
Re-boot did fix the missing CPU temp data all that was there before was *C
 
Check for update still gives an HTTP error
 
Yes I have same problem as above error with update!!!
 
And Thanks for the new update the Software and new EVGA cooler are keeping my system cool and with a lot less fan noise over air cooler
 

 
Did you uninstall old version beta before install to new version? 
 
when I have save to profile 1 and then load profile 1 but it close to minimized into start task bar!!???
 
On fan curve I cannot move top dot 100% speed / 60 c' ????
 
 
 

Hey all, first post on the forums.  Just wanted to point out a bug in the Flow Control Software.  Not sure if anyone has mentioned it or not, haven't seen it after a quick search.
 
Installed the new version (2.0.0.3) the other day and not long after noticed my delete key on my keyboard stopped working.  Took the board apart and didn't see anything obvious.  After a reboot, keyboard worked again and didn't think anything of it.  Well, I noticed it stopped working again today so i said screw it and bought a new keyboard...immediately saw the same issue.  The top post I found after a search was saying that Precision X was the culprit, but it was quite old.  Tried closing Precision X and uninstalling but didn't fix the problem.  Then I remembered Flow Control.  Closed the program and voila!  Delete key works.  Verified with both keyboards.  
 
Anyway, just wanted to point this out.  Sounds like it was an issue before and came back with the new software.
 
Anyone else experience this?
 
Edit:  I guess I should provide some system details...  I am on Windows 10 (64bit) with a 4790K (@4.7GHz) on an MSI Z97 Gaming 5 board.  If there is any other details desired, i will happily provide them.

Have see 2 items
( One: see above - when we can't get the program in the task bar to go active and Isaw 12 % cpu use then)
Two: Not point a finger at OCX or water block just yet but if I use my USB switch to  connect my Logitec G19 to another computer then come back the keyboard does not totally comeback -ie key lights default and NO LCD updates of GPU/CPU temps)
but the key do work
 
I  will test the delete key next time and look for  the problem you saw.
 
--I use the 4 position USB switch all the time on several Windows 7 and windows 10 systems before with no problems and it is with HI CPU uses ( FOLDING ) when  I  saw it happen so that may be a clue on software priority level ?

riegler13
When will AM4 socket arrive

I hoping soon I need a AM4 bracket (CL120) for my AMD 7 1800X RYZEN.

IamR30

riegler13
When will AM4 socket arrive

I hoping soon I need a AM4 bracket (CL120) for my AMD 7 1800X RYZEN.

+1

May not make any difference to us but looking at the connections from unit to the fans only one wire set to one fan has the speed RPM wire. You may want to mark which fan if you ever replace one or try to run with one fan out of order.
It is easy to switch the wire sets.
 
I did add a tie-wrap as they pull apart easy.