Someone can share his stable highest Overclock settings for Evga 1080ti Ftw3 Hybrid ? 
 
 
I have tried lots of things.. I can't pass 2050 mhz...:(

I'm using precisionx 
 
Slave (OC) mode on

smackey
this is what i ordered 
I'm only getting+50 right now without even touching the memory and the boost clock is fluctuating between 2025-2037 depending on the temps.
It's already in the slave bios with 127 power target and voltage is all the way up. do i also need to update the gpu bios? what i am doing wrong? or do i have faulty gpu?

 
I have same issue...Can't pass clock +50 
 
After +50  it crash
 

post edited by tanil - 2017/12/27 15:52:49

AHowes
Try msi afterburner.. the latest version you can use a curve method to overclock.

I mention this cause the curve overclock don't work on pxoc anymore.. been broken for many releases now.

Select the dot for 1.093v and hold the control key and use the mouse to raise the dot to 2100mhz. Hit enter and then hit apply.

See what happends.. if it's not stable in firestrike or timespy try it lower till shs stable... sometimes you need to try a lower voltage. Try 1.075 or even 1.050v at 2100.

 
I got  crash even 1.050v at 2088:(

I can't pass core +60 ... I did everything :(

AHowes
Have you tried running the memory at defaults with the core clock over +60?

Sure I have tried

I can only get 2050 - 2038

If I open rma they can change my gpu?

I get stable +100 on my core, but haven't done stress testing, so just backed it off to defaults.

Duppex77
Mine goes to 2083 mhz normal bios. I have not tried slave bios yet.
 
I had the 1080ti SC2 Hybrid, and sold it as the card could only OC to 1986mhz, I was unlucky with the silicon lottery. 
 
One thing I understand now, if you are a gamer like me the extra mhz you get from OC these 1080 ti cards, does next to nothing FPS wise. 
 
I bet most people would not be able to tell the difference between 1080 ti founders edition vs a 1080 ti Kingpin edition, if you could only see gameplay, no OSD information.
 
 

Remember that for the 1180.

Buy a new case

Duppex77
Mine goes to 2083 mhz normal bios. I have not tried slave bios yet.
 
I had the 1080ti SC2 Hybrid, and sold it as the card could only OC to 1986mhz, I was unlucky with the silicon lottery. 
 
One thing I understand now, if you are a gamer like me the extra mhz you get from OC these 1080 ti cards, does next to nothing FPS wise. 
 
I bet most people would not be able to tell the difference between 1080 ti founders edition vs a 1080 ti Kingpin edition, if you could only see gameplay, no OSD information.
 
 

Well.... I agree if you're talking about over clocking both you'd see very little difference in gaming between the two. I'd disagree a bit in saying there is zero performance gain overclocking either model from from stock. I'd say the combination of my CPU and GPU clocks give me a solid 20% increase across the board.  That's about a generational difference in performance...for free minus... some extra watts.

Viper453

AHowes
Buy a new case

you have any recommendations? I found this case that looks like it could work 
http://www.microcenter.co..._Computer_Case_-_Black
 
There is 750D Airflow also
 
https://forums.evga.com/D...f-a-750D-m2687582.aspx
 
I think this case looks very good
 
http://www.microcenter.co...er_Case_-_Arctic_White

First link don't work.. the 750D looks good.

I used the thermaltake core9. Was a pain to do it but was able to mount them up top and have 140mm fans also up top.. youll need alot of fan for thst case though.. thats the downfall of it.

AHowes

tanil

AHowes

tanil
I can only get 2050 - 2038

If I open rma they can change my gpu?

Nope. The card is well over it's rated specs. I believe it's rated for 15-1600+ mhz.

Anything over 2000mhz is considered good!

 
I always unlucky :( 
 
Do you have any advise for me ?
 
It is Amazon product

I guess you could try and exchange it with Amazon if within the 30 day exchange period and roll the dice and see what happends on the next card if it bothers you that much.

 
I realized that Noise  is coming from Radiator Fan. When I stop radiator fan with my hand there is no disturbing noise.
 
This is goog thing because I supposed that pump is broken... If I open RMA they can ship to me new radiator fan ?
 
 
But bad silicone lottery still continue... I can't pass 2038 mhz :( 
 
I don't care 40 degree or 50 degree ... I bought this card for 2100 mhz :(
 
 
I recorded Video:

 can you watch my fan problem....   youtu.be/o4KQBfBpLi0
 
Today I changed my radiator fan with corsair fan   there is no noise ..... I'm happy because problem is not radiator :D  just low profile fan

AHowes
I don't notice anything sounding off? Nothing wrong?

 
 
Maybe phone camera couldn't catch noise but there is fan noise..
 
no problem I still can't pass 2038 mhz :) bad silicon lottery

I received my FTW3 hybrid today.
With stock fan, I have around 47-49 C in super position (1080p extreme).
But of course, I do not like the stock fan :)
I put a Noctua F12 PWM (the regular one), connected to the motherboard (Asus IX Apex), well - the results are not so interesting, 67-68 C peaks in the same super position (~ 1100 rpm).
I increased the rotation at 1400 rpm, 58 C peaks, but I'm not sure I like the sound of the air through the radiator at that rotation.
 
I am in doubt now what fan to get for the radiator, I heard that the ML 120 at not that brilliant as they say...
Really tough choice, my goal is to reach under 60C, but to stay really silent.
Probably next time I'll not get a hybrid anymore.