ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Mobo: FTW-K Cpu: 6850k
With everything stripped and just the cpu on I get infinite looped restarts. It powers up, quickly goes thru some code then it shuts right off after 2 seconds. First and last codes are C, I can see what other codes shown up cuz it goes thru them quite fast and it's between the 10 and 19 digits(all cpu related). When I unplug my cpu power everything stays on with the C on the debug obviously telling no cpu detected. Is it the board? Which I just got back from RMA. Or could it be the CPU that is dead? Everything is in good condition, no visible damage on both cpu and mobo... Anyone have any idea?
Thanks in advance
|
wmmills
CLASSIFIED ULTRA Member
- Total Posts : 5679
- Reward points : 0
- Joined: 2006/01/04 20:47:29
- Location: New Jersey
- Status: offline
- Ribbons : 40
Re: Dead cpu or mobo?
2017/03/01 04:11:04
(permalink)
Try loosening the screws, each one, a turn on your cpu cooler if its that type, if its the intel type push pins then you may need to take the cpu cooler off and check the socket pins thoroughly to make sure none are bent. When you do that though see if the cpu is warm at all, which would tell you if its at least a working chip or not. If its cold then its dead. Usually when a mobo cycles like that it means it doesn't like the settings and its resetting itself to install default bios settings. If it cant sense the defaults correctly it can get stuck in a loop like this, which means you need to go in and manually set core voltages for cpu and ram and set the ram timings and clock rate of 2, save and reboot. The only difference with this setup is that its showing a C on the error display which usually points to the cpu, in case you were going to try getting in the bios first and do the settings manually before you take it apart. :)
MOBO: EVGA x299 Dark, CPU: I9 10900X, RAM: Patriot Viper RGB 3600 32gb, SSD: Samsung 860 EVO 1TB, M2: Samsung 970 EVO+ 1TB, PSU: CoolerMaster M2 1500, CPU HSF: EVGA 240 CLC HSF~ P/P EK Furious Vardar, G-CARD:EVGA RTX3090 FTW3 Ultra Gaming w/Hybrid kit and Noctua IPPC 3000 P/P, CASE: LIAN-LI PC-V2010B w/ Window mod, OS: Windows 10 Pro 64bit, MON: Alienware AW3821DW New EVGA product? Register it NOW with this link: http://www.evga.com/register/default.asp?affiliatecode=4QFQRAMOII Help Our Vets From K-2! [link=https://strongholdfreedom
|
ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Re: Dead cpu or mobo?
2017/03/01 04:29:45
(permalink)
The cycles are 2 sec max, from powering on to shutting off. It reboots in its initialization step. Can't even reach bits settings. As I said everything lookseems visually OK. Nothing bent, nothing looking out of ordinary.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Dead cpu or mobo?
2017/03/01 10:06:02
(permalink)
Moving this to the proper forum
|
ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Re: Dead cpu or mobo?
2017/03/01 10:10:20
(permalink)
Ty. I meant I can't even reach the Bios menu. Tried both reset cmos button and refitting the battery. Still nothing. I've tried without cooler to see if cpu was working and it does heat up so I believe it is getting power at least.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Dead cpu or mobo?
2017/03/01 10:15:59
(permalink)
What I would recommend in this case is that you contact EVGA technical support.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Dead cpu or mobo?
2017/03/01 10:23:07
(permalink)
Lets get a good overview MB, CPU & cooler are installed RAM ? how many are installed --> what slot are you using GPU ? PSU ? MB is it on a Non-conductive surface or in the case ?
|
HeavyHemi
Insert Custom Title Here
- Total Posts : 15665
- Reward points : 0
- Joined: 2008/11/28 20:31:42
- Location: Western Washington
- Status: offline
- Ribbons : 135
Re: Dead cpu or mobo?
2017/03/01 10:25:07
(permalink)
Booting up the without the heatsink installed....dead CPU.
EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
|
ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Re: Dead cpu or mobo?
2017/03/01 10:30:52
(permalink)
Ram: Ddr4 32gb (4x8gb) 3200mhz & ddr4 16gb (2x8gb) 3200 mhz
Gpu: evga gtx 1080 ftw (not currently installed, problem happens even if installed)
Psu: supernova 1000 p2 & corsair cx750
Mobo is on mobo package. It was previously installed on the enthoo evolv atx, it was a close fit didn't feel like I had to forced it. I've checked clearance from the back and nothing seems touching.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Dead cpu or mobo?
2017/03/01 10:40:34
(permalink)
ltomada91
Mobo is on mobo package.
You have it on the Cardboard box; NOT the anti-static Bag ?
|
ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Re: Dead cpu or mobo?
2017/03/01 10:50:00
(permalink)
Ahah, no no, cardboard box, used wrong wording
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Dead cpu or mobo?
2017/03/01 11:08:01
(permalink)
Manual PDF EVGA X99 FTW K P/N: 151-BE-E097-KR Page 22 - You must populate odd-slots (1, 3, 5, 7) first. The board will not boot if only even-slots (2, 4, 6, 8) are populated. Page 29 - Are you using a 8-pin power cable - EPS 8pin 12V power ? Does the plastic lach on the power cord close on the MB EPS socket?
|
ltomada91
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2017/01/11 15:11:31
- Status: offline
- Ribbons : 0
Re: Dead cpu or mobo?
2017/03/01 11:10:52
(permalink)
I know about the ram and im using the CPU labeled cable and it fits perfectly.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Dead cpu or mobo?
2017/03/01 11:14:42
(permalink)
OK, just covering the basics Which LEDs are On ? Before you start MB When MB tries to boot Manual pages 10 -12 tell you the location and color - what the leds indicate
|
Sajin
EVGA Forum Moderator
- Total Posts : 49168
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: Dead cpu or mobo?
2017/03/01 13:13:24
(permalink)
|