http://nvidia.custhelp.com/app/answers/detail/a_id/4674
 
a FW gona be released for  said cards that apply this? are they even needed? I have 1070ti Black

tsunami231
http://nvidia.custhelp.com/app/answers/detail/a_id/4674
 
a FW gona be released for  said cards that apply this? are they even needed? I have 1070ti Black

NVIDIA TITAN Series:
TITAN X (Maxwell), TITAN X (Pascal), TITAN XP
GeForce 10 Series:
GeForce GT 1030, GeForce GTX 1050, GTX 1050Ti, GTX 1060, GTX 1070, GTX 1070Ti, GTX 1080, GTX 1080Ti

aka_STEVE_b
I did this update last night and *voila * - I can actually see the Bios load screen & splash logo  at boot now while using a displayport cable.
 Can't believe it took nvidia or MS this long to figure it out and fix it. 
 
 
*update went pretty quick , requires a restart and I haven't seen anything adverse side-effect , yet ....

How did it effect your default clocks?  The FTW3 has higher clocks than basic 1808TI...

bobmitch

aka_STEVE_b
I did this update last night and *voila * - I can actually see the Bios load screen & splash logo  at boot now while using a displayport cable.
 Can't believe it took nvidia or MS this long to figure it out and fix it. 
 
 
*update went pretty quick , requires a restart and I haven't seen anything adverse side-effect , yet ....

How did it effect your default clocks?  The FTW3 has higher clocks than basic 1808TI...

It does not change clocks or the BIOS version. It's similar to a microcode update for a CPU.  The update was to improve compatibility and features for DP.

Thanks for Beta testing and sharing your results

Sajin
Hmm. Not having issues, so I'm not updating mine.

Chicken.lol
;)

Sajin

dlbsyst

Sajin
Hmm. Not having issues, so I'm not updating mine.

Chicken.lol
;)

 
If it ain't broke, don't fix it. 

What if it breaks, it's likely not reversible either.
And I wonder if it could introduce problems with G-sync, either on new or the old DP standards.
 
I'm currently not seeing the point of updating either since my main monitor is on DP1.2 and the 2nd is on DVI-D.
I'm not seeing my main DP1.2 screen show POST/Bios but it displays on DVI-D monitor until Windows is loaded.
 
The same happened with the old 780Ti in this system, and also happens with the 780Ti in another system where it only displays on the 2nd DVI-I to VGA display while keeping the DVI-D monitor blank.
 
I believe it will only stop doing that unplugging the 2nd monitor.
FYI the other system runs a P6T Deluxe V1, neither systems have an UEFI installed OS but the P6T doesn't support that anyway.

Updated my GTX 1080 with no problems since.   

Sajin

dlbsyst

Sajin
Hmm. Not having issues, so I'm not updating mine.

Chicken.lol
;)

 
If it ain't broke, don't fix it. 

Hi,
Indeed :)
My Titan Xp already had the firmware
I asked a new question missed this one :o
But yeah I was guessing this update would be coming from evga not nvidia.
Friend had an issue posted it on my thread about this topic.
 

squall-leonhart
This firmware cannot introduce issues with Gsync, or any technology activated by the windows driver.
 
the updated GOP table only fixes and enables the UEFI GOP driver to work with BFG monitors, and the gop driver is completely unloaded once the windows driver has.

Thanks for the further details. 
Although aslong I don't run into the issue I suppose I don't have to patch it.

I just updated this and now my EVGA GeForce GTX 1070 SC GAMING Black Edition does not go into boost at all.
 
Edit: Hitting boost clocks now, FPS is still trash in games.  Used to max out War Thunder with 75fps, now I am getting ~40-45. 
 
Edit 2:  If I change res to 1080p my FPS is maxed out again, if I run at 2560x1080 I get 40-45, before using this update I was getting 75 (max refresh).
 
Edit 3:  So my custom resolution 2560x1080 @ 75hz no longer gets stable FPS which I find strange, the monitor supports freesync and can be "OCed" in Nvidia panel, it worked fine before this fix.  2560x1080 @ 60hz runs maxed out in War Thunder all day long but once it's 75hz my FPS is in the trash. 

Hi,
Still would be nice if evga would state they are testing their bios with this update :)
@EVGA_JacobF

Hi,
Why not you said it yourself it reflashes the bios so it does make changes :/

Hi,
Thanks it still would be nice if we could get an official response from evga that they are testing these changes :)
Slave bios is already pretty bad as it is not sure i want to mess with master bios since I have no functional slave to fall back on.

ty_ger07
squall-leonhart is a developer who lives in an ideal world where software is perfect and only does exactly what you expect it to do. Without concrete evidence, you will not change his beliefs.

If you believe that there is an issue with your video card's BIOS after applying this update, contact EVGA.
https://www.evga.com/about/contactus/

Heh Heh, yes, I tend to agree. But after many years of reading posts, mainly in NV forum (differnt name there) I don't recall a single time he was wrong. I never brush off his comments.
He is not particularly popular at NV due to short, to the point comments (which are correct.) Niceties play no role in his life. Facts all the way. 
I consider him an expert. But he would be an awful teacher. That requires a wee bit of patience, and even a bit of hand holding at first for complex issues. I wonder if he knows about these concepts? Regardless, the outcome is the same post format. State the fact in as few words as possible (he is correct) but, no comments about why it's as it is. *(Usually, the post above is actually offers a proper reason)
So, I value his posts always. But if I don't understand underlying reasons, I check myself. Still, glad he is here. 
 
*Edit