Just got the classy going. Corsair VENGEANC 32GB (2x16GB) DDR5 DRAM 5600MHz C36.
12900K at 5.3GHz. Running processor video. XMP1 running at 5600. Not even changed anything only set to 5.3 in ELEET X1. Cinebench R23 10 minutes 28657. 

rjbarker
@Braegnok  anymore numbers or results with that new Dominator Hynix kit ;) 
 

The Dominator 6200 CL36 kit worked out vary well, I stopped testing at 6400 CL28 CR1,.. they will go higher frequency but I prefer running CR1, anything above 6400 required CR2 on my system,.. 6600 CL36 CR2 passed BIOS memory test on first boot. 
 
I started testing dual-channel, dual-rank setups with rank interleaving this morning.
 
Going to test Corsair 5200 CL40 2x32GB kit, Dell SK Hynix 2x32GB kit @ 4800 CL32, 6000 CL36. 
 
The Corsair 5200 CL40 kit XMP 1 profile:
 

 
I bumped up the frequency to 5400, tightened timings. 
 

 
Corsair 5200 CL40 kit is Micron IC.
 

 
 

Good luck, get those new Dominators loaded. 
 
Testing the 2x32GB Dell 4800MHz Hynix kit today. https://www.dell.com/en-u...=04&l=en&s=bsd
 
Running kit in Enhanced Mode 4800MHz CL32, CR 1T @ 1.10V works vary well.

 

Morning folks, took the z690 dark cold yesterday and wanted to share a few pics and results. Session ended with some no post issues down around full pot and I was out of time for the day. So we'll give it a shot today and see if the issues are with memory or just some weirdness from being cold for a couple hours.
 
Improved my ycruncher to 4th global, 2nd for 12900K https://hwbot.org/submission/4939904_
And this superpi 1M looked juicy but I guess the real competition is in the no benchmate subs so i'll be resubbing today to see where it lands https://hwbot.org/submission/4939852_
 
Fun day, board is great. Many thanks to Vince, Luumi, CENS for the solid XOC profiles that come with the board. It will be interesting to see if they release an AVX-512 switch. If not, we may need to search for a board that is this strong on memory oc that does include the AVX-512. But for now...
 

 

 

 

 

 

 

 

 

 
Wow, great results! 
 
 

I can't get the Corsair VENGEANC 32GB (2x16GB) DDR5 DRAM 5600MHz C36 past XMP1 5600MHZ. Although this is Samsung memory it  crashes at 5800 already. And badly with windows 11 repair or reinstall required. Did anyone tried to OC these?

With stable timings (6933 C31 1T) I cooled back down, set a mild 6.3P/4.5E OC on 12900K and set up SLI kingpins on chiller. It proved to be insufficient to cool them for more than a few good 3DMark runs and I wasn't even able to get a valid PR run in before I had to ripcord at fullpot again. Was still very fun and I snuck in to top 5 HOF for TimeSpy (2nd for 2x3090!)
 
https://www.3dmark.com/spy/26621640
https://www.3dmark.com/hall-of-fame-2/timespy+3dmark+score+performance+preset/version+1.0
 
And 3rd global for 2x GPUPI
https://hwbot.org/submission/4940834_zippytek_gpupi_v3.3___32b_2x_geforce_rtx_3090_1min_4sec_812ms
 
some pics from yesterday
 

 

 

 

 

 

 
have a great week y'all
zip
 
 

zippytek

Emparus
I can't get the Corsair VENGEANC 32GB (2x16GB) DDR5 DRAM 5600MHz C36 past XMP1 5600MHZ. Although this is Samsung memory it  crashes at 5800 already. And badly with windows 11 repair or reinstall required. Did anyone tried to OC these?

What cpu, vdd/vddq, cooling?

12900K in Z690 classified. Water cooled. All P cores 5.2, E cores  4.3, 4.2, 4.1 Max R23 10 minutes score 29645. XMP1 to 5600. Just increased to 5800 in bios.

Emparus

zippytek

Emparus
I can't get the Corsair VENGEANC 32GB (2x16GB) DDR5 DRAM 5600MHz C36 past XMP1 5600MHZ. Although this is Samsung memory it  crashes at 5800 already. And badly with windows 11 repair or reinstall required. Did anyone tried to OC these?

What cpu, vdd/vddq, cooling?

12900K in Z690 classified. Water cooled. All P cores 5.2, E cores  4.3, 4.2, 4.1 Max R23 10 minutes score 29645. XMP1 to 5600. Just increased to 5800 in bios.

Does Classified have OC Profiles in "Extras" ? What CENS suggested may work for you...choose one of the samsung daily OC profiles to start, then adjust cores, voltages, and frequency down to where you're testing while keeping their timings. so if the profile is say 7000, drop it to 5800 and see if it posts. VDD/VDDQ up to 1.6 but i'd start around 1.5 and go up to 1.55 if necessary. For 5800 you can prob get away with 1.5 or less but ymmv
 
that's going to be much faster than tuning your own timings but if you're comfortable doing it on your own by all means. 

zippytek

Emparus

zippytek

Emparus
I can't get the Corsair VENGEANC 32GB (2x16GB) DDR5 DRAM 5600MHz C36 past XMP1 5600MHZ. Although this is Samsung memory it  crashes at 5800 already. And badly with windows 11 repair or reinstall required. Did anyone tried to OC these?

What cpu, vdd/vddq, cooling?

12900K in Z690 classified. Water cooled. All P cores 5.2, E cores  4.3, 4.2, 4.1 Max R23 10 minutes score 29645. XMP1 to 5600. Just increased to 5800 in bios.

No OC profiles under extras
Does Classified have OC Profiles in "Extras" ? What CENS suggested may work for you...choose one of the samsung daily OC profiles to start, then adjust cores, voltages, and frequency down to where you're testing while keeping their timings. so if the profile is say 7000, drop it to 5800 and see if it posts. VDD/VDDQ up to 1.6 but i'd start around 1.5 and go up to 1.55 if necessary. For 5800 you can prob get away with 1.5 or less but ymmv
 
that's going to be much faster than tuning your own timings but if you're comfortable doing it on your own by all means. 

No OC profiles under extras in the Bios for the classified. Anywhere to get that info? I only went up to 1.44 VDD. Will figure it out great fun.
 

rjbarker
@Braegnok  anymore numbers or results with that new Dominator Hynix kit ;) 
 

Safedisk dropped new beta 1302 BIOS on Tuesday: https://www.overclock.net/threads/official-asus-strix-maximus-z690-owners-thread.1794802/page-201#post-28954298
 
Have been testing 1302 BIOS a few days now and it is solid. 
 
All XMP profiles train, manually adjust stable on first boot.
 

 
Manual settings 7000MHz + with CPU OC are also good to go with 1302.
 
sugi0lover Cache & Memory Benchmark.

 
 
 
 

 
Nice.
 

Is anyone using 4 sticks of DDR5 in the z690 classified?

rjbarker
Well this Dominator 6200 C36 has dominated me ;) Thru both BIOS 1101 (?) and 1302 I have not been able to get the RAM stable at 6200 C36....regardless of voltages I throw at it.
Was able to get thru Memtest with very low SA 1.05v but the next time I try with same settings I fail...
Perhaps simply my IMC cant do it...not sure.
 
It is perfectly stable at 6000 C36 though....so I tried tightening timings (there is other ways to skin a cat)....
Able to run it 6000 32-35-35-76 .....along with an "All Core" OC 5.2P 4.1E 1.285v ......
 

Same thing happened to me with my 6400 c32 kit. I played with voltages for days. Some times it would be rock solid stable and pass karhu for 12+ hours. Then I'd reboot and if would fail in minutes. Eventually just brought it down to 6200. Tried with test bios and official releases on the Apex.