EVGA

Helpful ReplyHot!Can the AiO on the 1080 Ti Hybrid kit be replaced?

Author
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
2018/06/13 06:54:47 (permalink)
Can I swap the 120mm radiator and pump for a bigger AiO on my Hybrid kit that I got for my 1080 Ti? I put it on like a year ago so I can't remember if the pump is standard or not. Can I take it off and put a bigger AiO on?
#1
WeGone
New Member
  • Total Posts : 83
  • Reward points : 0
  • Joined: 2017/02/28 19:53:38
  • Status: offline
  • Ribbons : 1
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 07:18:30 (permalink)
Its a sealed kit. I guess you could but would be easier just to get a new set up.  

Asus Maximus VIII Alpha/Corsair Dominator 32gb/I7 6700K/Samsung 850 EVO 500/ Seagate ES.3 2TB/Swiftech 240rad/Plus 480 remote radiator 2nd pump and seasonic 650 PS. /Evga GTX 1080 ti fe hybrid/Evga Supernova 750w PS/Asus PG279Q/Cooler Master Storm Stryker case/ CM HAF converted to remote Radiator Box.
Affiliate code QFRAG8O025
#2
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 08:28:19 (permalink)
WeGone
Its a sealed kit. I guess you could but would be easier just to get a new set up.  


I know the AiO is sealed, but the unit itself is not sealed to the shroud. I remember attaching the pump I just don't remember if it was standard or not. 
#3
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 13190
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 77
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 08:43:01 (permalink)
rlg5150
WeGone
Its a sealed kit. I guess you could but would be easier just to get a new set up.  


I know the AiO is sealed, but the unit itself is not sealed to the shroud. I remember attaching the pump I just don't remember if it was standard or not. 


rlg5150
Can I swap the 120mm radiator and pump for a bigger AiO on my Hybrid kit that I got for my 1080 Ti? I put it on like a year ago so I can't remember if the pump is standard or not. Can I take it off and put a bigger AiO on?



I'm not sure exactly what you're asking, but the pump housing is obviously designed to fit within the shroud. As there is almost no clearance with the existing shroud and pump, I'm not sure how you would put a LARGER pump. There are other AIO's folks have used but not without doing modifications to the shroud and possibly the backplate.

EVGA X99 FTWK / i7 6850K 4.5ghz / GTX1080 Ti FE Hybrid / 32GB Corsair LPX 3200mhz / Samsung 850Pro 256GB / Corsair AX1200 / Window 10 Pro
Fire Strike                        24,163
Fire  Strike Extreme        14,452 
Fire Strike Ultra                7,711 
Time Spy                        10,357

#4
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 08:47:54 (permalink)
HeavyHemi
rlg5150
WeGone
Its a sealed kit. I guess you could but would be easier just to get a new set up.  


I know the AiO is sealed, but the unit itself is not sealed to the shroud. I remember attaching the pump I just don't remember if it was standard or not. 


rlg5150
Can I swap the 120mm radiator and pump for a bigger AiO on my Hybrid kit that I got for my 1080 Ti? I put it on like a year ago so I can't remember if the pump is standard or not. Can I take it off and put a bigger AiO on?



I'm not sure exactly what you're asking, but the pump housing is obviously designed to fit within the shroud. As there is almost no clearance with the existing shroud and pump, I'm not sure how you would put a LARGER pump. There are other AIO's folks have used but not without doing modifications to the shroud and possibly the backplate.


Not really wanting a larger pump, just a larger radiator. For example, I have two Corsair AiOs here with the same size pump but one is 120mm radiator and the other is 240mm radiator. I know that one company makes most of the pumps and I'm just wondering if an EVGA 240mm AiO would swap out with the 120mm that's included with the hybrid kit. 
 
The kit was just a shroud and an AiO. Most of the AiOs are standard because most of them are all made by the same company. I just don't know if the EVGA one that was included with the hybrid kit was standard size or not. 
#5
Sajin
EVGA Forum Moderator
  • Total Posts : 30774
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 181
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 10:41:38 (permalink)
Swapping the rad for another rad will void the warranty. If you're ok with that have at it.


#6
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:17:32 (permalink)
Sajin
Swapping the rad for another rad will void the warranty. If you're ok with that have at it.


What? How in the world could that void the warranty. The Hybrid kit is just an AiO and a shroud in a box. If I wanted to send it in for warranty I'd just put the shroud and original AiO in the box. That's like saying I void my motherboard warranty by using my own SATA cables instead of the ones that came with it. 
 
It's a moot point, though. It only has a 1 year warranty and that's already expired.
#7
HeavyHemi
Omnipotent Enthusiast
  • Total Posts : 13190
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 77
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:34:08 (permalink)
rlg5150
Sajin
Swapping the rad for another rad will void the warranty. If you're ok with that have at it.


What? How in the world could that void the warranty. The Hybrid kit is just an AiO and a shroud in a box. If I wanted to send it in for warranty I'd just put the shroud and original AiO in the box. That's like saying I void my motherboard warranty by using my own SATA cables instead of the ones that came with it. 
 
It's a moot point, though. It only has a 1 year warranty and that's already expired.




I think he was assuming that your GPU was a Hybrid model. In which case you would be voiding your warranty for the GPU. Since you're discussing a separate Hybrid cooler that you added to the GPU, the only warranty would be on the Hybrid kit.  In any event, your posts are confusing. If I finally read you correctly, you're asking if you could splice in the 240 rad in place of the 120? Sure, why not. But you'd need to figure out what fluid to use and how the get most of the air out of the system as you would be breaking the seal to do so. Pretty much all these answers and issues should be apparent to you already if you're even considering this. I'm not sure what you'd gain with the extra rad area versus adding another fan to the rad for push/pull.

EVGA X99 FTWK / i7 6850K 4.5ghz / GTX1080 Ti FE Hybrid / 32GB Corsair LPX 3200mhz / Samsung 850Pro 256GB / Corsair AX1200 / Window 10 Pro
Fire Strike                        24,163
Fire  Strike Extreme        14,452 
Fire Strike Ultra                7,711 
Time Spy                        10,357

#8
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:38:35 (permalink)
HeavyHemi
rlg5150
Sajin
Swapping the rad for another rad will void the warranty. If you're ok with that have at it.


What? How in the world could that void the warranty. The Hybrid kit is just an AiO and a shroud in a box. If I wanted to send it in for warranty I'd just put the shroud and original AiO in the box. That's like saying I void my motherboard warranty by using my own SATA cables instead of the ones that came with it. 
 
It's a moot point, though. It only has a 1 year warranty and that's already expired.




I think he was assuming that your GPU was a Hybrid model. In which case you would be voiding your warranty for the GPU. Since you're discussing a separate Hybrid cooler that you added to the GPU, the only warranty would be on the Hybrid kit.  In any event, your posts are confusing. If I finally read you correctly, you're asking if you could splice in the 240 rad in place of the 120? Sure, why not. But you'd need to figure out what fluid to use and how the get most of the air out of the system as you would be breaking the seal to do so. Pretty much all these answers and issues should be apparent to you already if you're even considering this. I'm not sure what you'd gain with the extra rad area versus adding another fan to the rad for push/pull.


No, that's not what I'm asking at all. The AiO appears to be a standard one, although I haven't taken my shroud off again yet so I can't tell for sure. I'm talking about swapping the entire AiO, not disassembling or splicing anything. EVGA sells 240mm AiO units as well as 120mm AiO. I'm wondering if the 240mm AiO unit from EVGA will fit within the hybrid kit. 
 
Again, the kit is just a 120mm AiO and a shroud. You install the AiO just like you would any other AiO on a CPU and then screw the shroud on. It's not like it's an all in one shroud and pump/radiator kit. 
#9
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:40:29 (permalink)
For reference, since everyone seems to be confused about what the hybrid kit is:
 

 
I am just wondering if that's a regular old standard Asetek AiO in which case the EVGA 240mm version should also fit, right?
 
#10
Cool GTX
EVGA Forum Moderator
  • Total Posts : 11387
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Mid-Atlantic
  • Status: offline
  • Ribbons : 86
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:42:34 (permalink)
I'm thinking the Question is:
 
Can OP replace "stock AIO" with a EVGA CLC 240 unit ---> I do not know if it will fit
 

 
There are aftermarket AIO & mounting "kits" that have been used on Air cooled GPU - "I'm thinking a separate NZXT Kraken mount and heatsinks"

Nibbler - EVGA X99 Classified, 5960X, 2-TitanX P & EVGA 1080FE, Custom loop, modded Phanteks Enthoo Primo, 32GB GSkill DR4, Intel NVMe PCIe 750 SSD, Win10 Pro, EVGA 1600 P2, Folding 3.5M PPD, 4K Acer XB280HK monitor
AIO Folding Rampage5e10, 5930K, EVGA CLC 240 2-EVGA 1080Ti FTW3 Hybrid, 32GB GSkill DDR4, Samsumg 850 Pro SSD, Win 7 Pro 64bit, EVGA 1200 P2 PSU, Folding 2M PPD, Thermaltake View 71  Affiliate code 05MLLDCG6B

#11
Sajin
EVGA Forum Moderator
  • Total Posts : 30774
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 181
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:43:50 (permalink) ☄ Helpfulby rlg5150 2018/06/13 11:45:02
The cpu kits don't work with the gpu's.


#12
ty_ger07
Omnipotent Enthusiast
  • Total Posts : 13872
  • Reward points : 0
  • Joined: 2008/04/10 23:48:15
  • Location: Land of 10,000 lakes.
  • Status: online
  • Ribbons : 123
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:44:07 (permalink) ☄ Helpfulby rlg5150 2018/06/13 11:44:29
I don't know the answer to your question, that's why I have not replied earlier, but for the record, I don't think your question was confusing at all. I understood your question 3 hours ago, after your second reply.
#13
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:44:12 (permalink)
Cool GTX
I'm thinking the Question is:
 
Can OP replace "stock AIO" with a EVGA CLC 240 unit ---> I do not know if it will fit
 
There are aftermarket AIO & mounting "kits" that have been used on Air cooled GPU - "I'm thinking a separate NZXT Kraken mount and heatsinks"


Exactly! 
 
And for those who asked, I'm not really wanting to do it for performance reasons, but actually aesthetic reasons. The 120mm looks out of place in my case when I have 3x 120mm intake fans. 
#14
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:46:50 (permalink)
I'd honestly rather go back to just air cooling since I recently swapped my H100i v2 for a much better performing Dark Rock Pro 4. BUT, there's no way I'm putting that noisy FE cooler back on the card.
 
I've searched eBay for someone that might have removed an iCX cooler for a custom waterblock hoping I could buy that and fit it to my card, but I can't find anything. 
 
#15
kram36
Insert Custom Title Here
  • Total Posts : 16114
  • Reward points : 0
  • Joined: 2009/10/27 19:00:58
  • Location: United States
  • Status: offline
  • Ribbons : 55
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 11:54:14 (permalink)
You would have to find a kit where the tubing comes out of the side of the pump/block combo. The pump/block would also need to be made to mate to the Hybrid memory cooling plate. Then you have to look at how the pump/block mounts as the Hybrid pump/block mounting plate has the screw points built into plate.

EVGA X99 Classified | Intel i7-5930K | EVGA GTX 1080 Ti | WD Black PCIe NVMe 500GB | EVGA 32GB 2800MHz Memory
#16
Cool GTX
EVGA Forum Moderator
  • Total Posts : 11387
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Mid-Atlantic
  • Status: offline
  • Ribbons : 86
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 12:14:07 (permalink)
After market part AIO and something like this NZXT RL-KRG12-B1 Black Kraken G12 GPU Mounting Bracket For A-I-O Liquid Coolers
excerpt
"G12 is compatible with more than 30 liquid coolers on the market."

Nibbler - EVGA X99 Classified, 5960X, 2-TitanX P & EVGA 1080FE, Custom loop, modded Phanteks Enthoo Primo, 32GB GSkill DR4, Intel NVMe PCIe 750 SSD, Win10 Pro, EVGA 1600 P2, Folding 3.5M PPD, 4K Acer XB280HK monitor
AIO Folding Rampage5e10, 5930K, EVGA CLC 240 2-EVGA 1080Ti FTW3 Hybrid, 32GB GSkill DDR4, Samsumg 850 Pro SSD, Win 7 Pro 64bit, EVGA 1200 P2 PSU, Folding 2M PPD, Thermaltake View 71  Affiliate code 05MLLDCG6B

#17
Hoggle
EVGA Forum Moderator
  • Total Posts : 2936
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 2
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 12:22:53 (permalink)
I guess the real question would be why? It’s like going from cooling overkill to more cooling overkill.
#18
rlg5150
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2013/06/02 12:08:27
  • Status: offline
  • Ribbons : 0
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/13 12:25:17 (permalink)
Hoggle
I guess the real question would be why? It’s like going from cooling overkill to more cooling overkill.

Like I said - aesthetic reasons. The 120mm just looks funny now that I have moved it to the front intake of my case. It looked OK as exhaust, but that won't work with my current setup anymore. 
 
Also because I have some larger AiOs already so if they would fit, why not? I also have the NZXT g10 bracket that I used to have on my 780 Ti, but I much prefer the looks of the EVGA shroud. 
#19
petmic10
iCX Member
  • Total Posts : 326
  • Reward points : 0
  • Joined: 2016/02/26 05:26:53
  • Status: offline
  • Ribbons : 1
Re: Can the AiO on the 1080 Ti Hybrid kit be replaced? 2018/06/18 06:10:14 (permalink)
The EK MLC is a modular radiator/pump & water block combo kit. They have a block for the FTW3 and Hybrid cards. I was thinking of doing the same as the op. It's not cheap though.
 
I wouldn't go larger than a 140mm radiator. Anything more is overkill on a gpu unless you plan on expanding to the cpu in the future.
 
Just bypass the cpu cooling module section.
https://www.ekwb.com/shop/aio/ek-mlc
post edited by petmic10 - 2018/06/18 07:12:11

i7 6700K(4.5GHz), Noctua NH-D15S, 16GB G-Skill Ripjaw V Series(DDR4), EVGA GTX 1080Ti FTW3 Hybrid, MSI Z170A XPower Titanium Edition MB, Samsung 850 Pro 1TB, Samsung 860 Pro M2 512gb,  Ben Q 32" BL3200PT 1440P Monitor, Windows 10, EVGA 850W P2 Power Supply, Phanteks Enthoo Evolv ATX Case

#20
Jump to:
  • Back to Mobile