EVGA

? that i should have asked years ago

Author
Post
Essentials Only Full Version
elaferan
New Member
  • Total Posts : 26
  • Reward points : 0
  • Joined: 2011/07/16 04:34:25
  • Location: tustin
  • Status: offline
  • Ribbons : 0
2014/08/28 11:07:19 (permalink)
I have a pp55 200 classified m bord 16 gigs of ram . i7 core . windows 7 64 bit . an hears the kicker in the top pci slot i put a d-link wireless card an under neath in the lower pci slots 3 gtx 470 ... i sli them under the same bus on the lower slots of the m bord .kinda know that was wrong down the road thoe still .... any way hears the ? .
 
wen you config nvida to drop the sound drivers off your gtx cards an you have a tv hd hdmi hook up that had sound thru nvida the crapy ill write over my own buss irq black screeen of death ..yes they never learn it would seem i was crashing with 340 det an lower so i disabled the sound drivers on the cards an counter strike didnt black screen of death me ....
how do i get sound over the mini HD output from the nvida gtx470 thru realtek .
 
sound thru nvida over hd disabled all 3 drivers
can realtek send gaming sound thru nvida gtx 470 mini hd port to tv 47 inch vizio if so can some one explain .
 
 
 
 
#1

6 Replies Related Threads
    elaferan
    New Member
    • Total Posts : 26
    • Reward points : 0
    • Joined: 2011/07/16 04:34:25
    • Location: tustin
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/08/28 11:17:45 (permalink)
    also just fyi i would like to thank again evga for the RMA card i had 1 blow up an they wer verry fast in getting me taken care of even thoe i had stickers off of them :) the new card is 10c lower then the other 2 older ones so I put it in the middel of the 3 the rig is runing great no problems .
     
    nvida thoe ... i wasnt preped for the sound driver to cause black screen of death again . after the last go around its like a slap in the face . so upset dont even want to talk to them over it. the new driver is doing the same black screen reset .
     
    hopfuly realtek sound driver can go thru the mini hdmi on the gtx 470 card like nvida had so i never have to have there crapy ,incertbadwordshear, again
    #2
    _JamesR
    EVGA Alumni
    • Total Posts : 253
    • Reward points : 0
    • Joined: 2014/06/01 07:01:44
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/08/28 12:31:07 (permalink)
    I believe that the Nvidia HD Audio drivers do need to be installed in order for Windows to see any HDMI or DisplayPort ports as potential audio output devices.
     
    If you're experiencing the same issue with two different cards, there may be a component in your computer that is causing the issue, rather than the drivers or the video card. As you say you get driver crash/resets once you have drivers installed, I would test your machine with either a different power supply or a different set of RAM, if you have spares readily available.
     
    If you require further support, you are more than welcome to contact EVGA technical support at support@evga.com or 888-881-EVGA (3824). We're available to help you any time.

    EVGA Z97 Classified w/ i7 4790 | 32GB Crucial Ballistix Elite | 2x EVGA GTX 980 Ti ACX 2.0 | EVGA 1000w G2 | Samsung EVO 840 120GB | Samsung 850 EVO 250GB | Seagate 3TB | 3x WD 2TB (Raid-5) | Corsair H100i GTX | 3x Asus VS278P-Q 27" 1080p 1ms GTG monitor (surround) | 1 Monoprice 28" 4K 5ms GTG (accessory)
    #3
    elaferan
    New Member
    • Total Posts : 26
    • Reward points : 0
    • Joined: 2011/07/16 04:34:25
    • Location: tustin
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/09/04 19:20:58 (permalink)
    A problem with your video hardware caused Windows to stop working correctly.
    Problem signature Problem Event Name: LiveKernelEvent OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033
    Extra information about the problem BCCode: 117 BCP1: FFFFFA8014502010 BCP2: FFFFF8800F16293C BCP3: 0000000000000000 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Bucket ID: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys Server information: de7be2bd-7e37-4bf8-9fea-658c9fa41490. freash build . thoe this is happening in only counterstrike an in a zombie escape map on plegfest. this crash has cost me 5 reformats since I have been gathering data an unpluging an pluging stuff in lol. I normaly never crash in tera thoe wen it happens its the same message in windows besides me an the power buttion shutting down due to a lock an crash frozen screen . I did reserect CPUID_sandybridge tattel tail thoe wen it happens I see nothing from it changes.
    #4
    elaferan
    New Member
    • Total Posts : 26
    • Reward points : 0
    • Joined: 2011/07/16 04:34:25
    • Location: tustin
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/09/04 19:26:02 (permalink)
    DIMM #1     SMBus address0x50     Memory typeDDR3     Module formatUDIMM     Manufacturer (ID)Kingston (7F98000000000000)     Size4096 MBytes     Max bandwidthPC3-10700 (667 MHz)     Part number9905403-090.A01LF      Serial number52357C1A     Manufacturing dateWeek 12/Year 10     Number of banks2021     Nominal Voltage1.50 Volts     EPPno     XMPyes     XMP revision1.2JEDEC timings tableCL-tRCD-tRP-tRAS-tRC @ frequency     JEDEC #16.0-6-6-17-23 @ 457 MHz     JEDEC #27.0-7-7-20-27 @ 533 MHz     JEDEC #38.0-8-8-22-30 @ 609 MHz     JEDEC #49.0-9-9-25-34 @ 685 MHzXMP profileXMP-1600     SpecificationPC3-12800     Voltage level1.650 Volts     Min Cycle time1.250 ns (800 MHz)     Min tRP11.25 ns     Min tRCD11.25 ns     Min tWR15.00 ns     Min tRAS33.75 ns     Min tRC45.00 ns     Min tRFC110.00 ns     Min tRTP7.50 ns     Min tRRD6.00 nsXMP timings tableCL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)     XMP #16.0-6-6-18-24-0T @ 533 MHz (1.650 Volts)     XMP #27.0-7-7-21-28-0T @ 622 MHz (1.650 Volts)     XMP #38.0-8-8-24-32-0T @ 711 MHz (1.650 Volts)     XMP #49.0-9-9-27-36-0T @ 800 MHz (1.650 Volts)  DIMM #7475     SMBus address0x51     Memory typeDDR3     Module formatUDIMM     Manufacturer (ID)Kingston (7F98000000000000)     Size4096 MBytes     Max bandwidthPC3-10700 (667 MHz)     Part number9905403-090.A01LF      Serial number5235791A     Manufacturing dateWeek 12/Year 10     Number of banks9495     Nominal Voltage1.50 Volts     EPPno     XMPyes     XMP revision1.2JEDEC timings tableCL-tRCD-tRP-tRAS-tRC @ frequency     JEDEC #16.0-6-6-17-23 @ 457 MHz     JEDEC #27.0-7-7-20-27 @ 533 MHz     JEDEC #38.0-8-8-22-30 @ 609 MHz     JEDEC #49.0-9-9-25-34 @ 685 MHzXMP profileXMP-1600     SpecificationPC3-12800     Voltage level1.650 Volts     Min Cycle time1.250 ns (800 MHz)     Min tRP11.25 ns     Min tRCD11.25 ns     Min tWR15.00 ns     Min tRAS33.75 ns     Min tRC45.00 ns     Min tRFC110.00 ns     Min tRTP7.50 ns     Min tRRD6.00 nsXMP timings tableCL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)     XMP #16.0-6-6-18-24-0T @ 533 MHz (1.650 Volts)     XMP #27.0-7-7-21-28-0T @ 622 MHz (1.650 Volts)     XMP #38.0-8-8-24-32-0T @ 711 MHz (1.650 Volts)     XMP #49.0-9-9-27-36-0T @ 800 MHz (1.650 Volts)  DIMM #148149     SMBus address0x52     Memory typeDDR3     Module formatUDIMM     Manufacturer (ID)Kingston (7F98000000000000)     Size4096 MBytes     Max bandwidthPC3-10700 (667 MHz)     Part number9905403-090.A01LF      Serial number51359D1A     Manufacturing dateWeek 12/Year 10     Number of banks168169     Nominal Voltage1.50 Volts     EPPno     XMPyes     XMP revision1.2JEDEC timings tableCL-tRCD-tRP-tRAS-tRC @ frequency     JEDEC #16.0-6-6-17-23 @ 457 MHz     JEDEC #27.0-7-7-20-27 @ 533 MHz     JEDEC #38.0-8-8-22-30 @ 609 MHz     JEDEC #49.0-9-9-25-34 @ 685 MHzXMP profileXMP-1600     SpecificationPC3-12800     Voltage level1.650 Volts     Min Cycle time1.250 ns (800 MHz)     Min tRP11.25 ns     Min tRCD11.25 ns     Min tWR15.00 ns     Min tRAS33.75 ns     Min tRC45.00 ns     Min tRFC110.00 ns     Min tRTP7.50 ns     Min tRRD6.00 nsXMP timings tableCL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)     XMP #16.0-6-6-18-24-0T @ 533 MHz (1.650 Volts)     XMP #27.0-7-7-21-28-0T @ 622 MHz (1.650 Volts)     XMP #38.0-8-8-24-32-0T @ 711 MHz (1.650 Volts)     XMP #49.0-9-9-27-36-0T @ 800 MHz (1.650 Volts)  DIMM #222223     SMBus address0x53     Memory typeDDR3     Module formatUDIMM     Manufacturer (ID)Kingston (7F98000000000000)     Size4096 MBytes     Max bandwidthPC3-10700 (667 MHz)     Part number9905403-090.A01LF      Serial number5435741A     Manufacturing dateWeek 12/Year 10     Number of banks242243     Nominal Voltage1.50 Volts     EPPno     XMPyes     XMP revision1.2JEDEC timings tableCL-tRCD-tRP-tRAS-tRC @ frequency     JEDEC #16.0-6-6-17-23 @ 457 MHz     JEDEC #27.0-7-7-20-27 @ 533 MHz     JEDEC #38.0-8-8-22-30 @ 609 MHz     JEDEC #49.0-9-9-25-34 @ 685 MHzXMP profileXMP-1600     SpecificationPC3-12800     Voltage level1.650 Volts     Min Cycle time1.250 ns (800 MHz)     Min tRP11.25 ns     Min tRCD11.25 ns     Min tWR15.00 ns     Min tRAS33.75 ns     Min tRC45.00 ns     Min tRFC110.00 ns     Min tRTP7.50 ns     Min tRRD6.00 nsXMP timings tableCL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)     XMP #16.0-6-6-18-24-0T @ 533 MHz (1.650 Volts)     XMP #27.0-7-7-21-28-0T @ 622 MHz (1.650 Volts)     XMP #38.0-8-8-24-32-0T @ 711 MHz (1.650 Volts)     XMP #49.0-9-9-27-36-0T @ 800 MHz (1.650 Volts)    Monitoring Mainboard ModelEVGA P55 3X SLI Classified (0x000007C7 - 0x549C53D2)  LPCIO LPCIO VendorFintekLPCIO ModelF71889FLPCIO Vendor ID0x1934LPCIO Chip ID0x723  
    #5
    elaferan
    New Member
    • Total Posts : 26
    • Reward points : 0
    • Joined: 2011/07/16 04:34:25
    • Location: tustin
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/09/04 19:44:07 (permalink)
    power supply is a silent pro 1200w gold from cooler master . due to the 3 gtx 470 cards I have. It had 1 extra plug for a cpu on the p55 m bord I never registerd with evga ...didnt know wer the ssn was lol ...at least I registerd the 3 gtx470"s an kept the falling off ssn sticker "s :D I know its not a hard wear issue as I can see the hole rig up an running . Im thinking eather windows due to there blue screen of death an locking down there older OS ... or nvida due to them rushing this driver out to cover the older drivers problems.
    any one know of a program i can run tell crash to point a finger at what is  the problem. this is annoying in seeing i ran thru this 3 years back an every one kept saying unplug this or that an it turned out to be a crossed sound diver softwear problem . hard wear is runing fine from what i can see have a full evga set up all the latest uploads from bord to cards .new os reformat :D.shrug i can leave CS alone for a littel thoe they just came out with a harry potter escape map zombies ... tigger want to play tigger want to play *stops jumping up an down* makes said face.  
    #6
    elaferan
    New Member
    • Total Posts : 26
    • Reward points : 0
    • Joined: 2011/07/16 04:34:25
    • Location: tustin
    • Status: offline
    • Ribbons : 0
    Re: ? that i should have asked years ago 2014/09/04 19:59:04 (permalink)
    oh the sound driver changes wen you hit it with a fresh copy of the bios was kinda new to me as i droped the updates in to a fresh reformat then brain farted the bios after . it jumped every thing around lol thoe it still did the crash . playing game game frezzes some times i can hit ctrl-alt-delet task master an close the counter strike client vrs the i have to slap the power buttion off.
    have graphicsdriver/sound driver/phisix driver 340 in only
    #7
    Jump to:
  • Back to Mobile