rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Good Afternoon everyone. Today I have decided to install this item:  Now here is the final build pic:  There is some dust on the inside of the side panel window so I will clean that up tomorrow. That probably occurred during disassembly. The 16 pin GPU cable is not bent although it looks that way in the picture. Everything in the front is nice and tidy. I have added a Hamster wheel gif to the cooler LCD screen. Hard to see it in the picture, but that Hamster is spinning that wheel:  The Corsair shift PSU puts the connectors on the side which makes cable management so much easier.
post edited by rjohnson11 - 2023/02/04 08:44:04
|
B0baganoosh
CLASSIFIED Member
- Total Posts : 2411
- Reward points : 0
- Joined: 2009/08/04 04:27:18
- Status: offline
- Ribbons : 39
Re: rjohnson11 PC update
2023/02/04 16:45:22
(permalink)
6Q6CPFHPBPCU691 is a discount code anyone can use. i9 13900k - EVGA Z690 Classy - Nvidia RTX 4090 FE - G.Skill 64GB DDR5-6000CL30 - WD SN850 2TB NVMe Gen4 - Be Quiet! Straight Power 12 1200W - Be Quiet! Dark Base 900 Pro. MO-RA3 420 Pro. Dark Palimpsest MODS RIGS post for build notes.
|
Delirious
EVGA Forum Moderator
- Total Posts : 11183
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: rjohnson11 PC update
2023/02/04 21:17:50
(permalink)
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8876
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: rjohnson11 PC update
2023/02/04 23:01:31
(permalink)
It’s nice to have the shift if a case allows for it. I could see it have problems for some case designs. I do however think that it’s a change that might be worth a change to since behind the motherboard tray is the best way to manage cables.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49061
- Reward points : 0
- Joined: 2010/06/07 21:11:51
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: rjohnson11 PC update
2023/02/05 03:27:17
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Re: rjohnson11 PC update
2023/02/05 03:35:29
(permalink)
The RM1200X has ribbon style cables. These are easier to maneuver into place and also allows the rear hinge door to close more easily.
|
Chaos_21
CLASSIFIED Member
- Total Posts : 3935
- Reward points : 0
- Joined: 2005/10/26 17:37:36
- Location: Redding, Ca
- Status: offline
- Ribbons : 10
Re: rjohnson11 PC update
2023/02/05 10:59:39
(permalink)
Seems to allow for easier plug in for future upgrades.
ASUS TUF Gaming Z690-Intel Core i9-12900K- EVGA 360 CLC Cooler-Corsair Vengeance 4 x 16GB 3200mhz-2TB Solidigm P41 Plus M.2 SSD--Three 1TB 970 EVO SSD's-EVGA GeForce RTX 3080 XC3 ULTRA-Corsair HX1000i-Windows 11 64bit-Corsair iCUE 5000X RGB Case. Steam Twitter: https://twitter.com/Chaos_21 Use my associate code: JBGVM12HDYDJPIM to get 5%-10% discount on EVGA purchases. 
|
ElectricYoshi
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2023/01/26 21:21:28
- Status: offline
- Ribbons : 0
Re: rjohnson11 PC update
2023/02/06 10:13:16
(permalink)
rjohnson11
Here is a picture of the back and the front. Yes the cables look like a mess but on the Corsair 5000X that is what the rear hinge door is for (to hide the mess). I noticed that my light strip is not in the right place so I'll fix that later.
 
I can relate to that cable management. 😁 However, it's a brilliant rig. Great work!
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30693
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: rjohnson11 PC update
2023/02/06 10:53:53
(permalink)
sharp Rig 
|
transdogmifier
CLASSIFIED ULTRA Member
- Total Posts : 5875
- Reward points : 0
- Joined: 2003/09/05 14:26:21
- Location: Orlando, Fl
- Status: offline
- Ribbons : 17
Re: rjohnson11 PC update
2023/02/06 11:37:03
(permalink)
that looks really nice, RJ!
AMD Ryzen 7900x3d Deepcool LT720 Gigabyte Aorus Elite AX X670 (Might change..don't like this board) eVGA GeForce RTX 3090 FTW3 Ultra Gaming (Hybrid kit on it) Asus ROG Swift PG43UQ 4k Monitor eVGA 1600W Supernova T2 PSU 32GB Kingston 6000 DDR5 (2x16GB) Fury Corsair MP600 Pro 2TB (Boot) Corsair MP600 2TB (Games/Data) Phanteks P500A Case
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
|
Chaos_21
CLASSIFIED Member
- Total Posts : 3935
- Reward points : 0
- Joined: 2005/10/26 17:37:36
- Location: Redding, Ca
- Status: offline
- Ribbons : 10
Re: rjohnson11 PC update
2023/02/06 12:42:48
(permalink)
rjohnson11
ElectricYoshi
rjohnson11
Here is a picture of the back and the front. Yes the cables look like a mess but on the Corsair 5000X that is what the rear hinge door is for (to hide the mess). I noticed that my light strip is not in the right place so I'll fix that later.
I can relate to that cable management. 😁 However, it's a brilliant rig. Great work!
The cables look like a mess because I have an iCUE Corsair Commander Pro installed as well as a Corsair Lighting node Pro. Lots of fans, lighting strips, and RGB going on.
If you remove the shroud and add 3 more intake fans your case would be much cooler. Thats what I did.
ASUS TUF Gaming Z690-Intel Core i9-12900K- EVGA 360 CLC Cooler-Corsair Vengeance 4 x 16GB 3200mhz-2TB Solidigm P41 Plus M.2 SSD--Three 1TB 970 EVO SSD's-EVGA GeForce RTX 3080 XC3 ULTRA-Corsair HX1000i-Windows 11 64bit-Corsair iCUE 5000X RGB Case. Steam Twitter: https://twitter.com/Chaos_21 Use my associate code: JBGVM12HDYDJPIM to get 5%-10% discount on EVGA purchases.
|
atfrico
Omnipotent Enthusiast
- Total Posts : 9738
- Reward points : 0
- Joined: 2008/05/20 16:16:06
- Location: <--Dip, Dip, Potato Chip!-->
- Status: offline
- Ribbons : 25
Re: rjohnson11 PC update
2023/02/06 12:45:04
(permalink)
Purple purple Barney will be proud ☺, j/k
👌 rig RJ purple rain theme
T hose who abuse power, are nothing but scumbags! The challenge of power is how to use it and not abuse it. The abuse of power that seems to create the most unhappiness is when a person uses personal power to get ahead without regards to the welfare of others, people are obsessed with it. You can take a nice person and turn them into a slob, into an insane being, craving power, destroying anything that stands in their way. Affiliate Code: 3T15O1S07G
|
ElectricYoshi
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2023/01/26 21:21:28
- Status: offline
- Ribbons : 0
Re: rjohnson11 PC update
2023/02/06 12:46:02
(permalink)
rjohnson11
ElectricYoshi
rjohnson11
Here is a picture of the back and the front. Yes the cables look like a mess but on the Corsair 5000X that is what the rear hinge door is for (to hide the mess). I noticed that my light strip is not in the right place so I'll fix that later.
I can relate to that cable management. 😁 However, it's a brilliant rig. Great work!
The cables look like a mess because I have an iCUE Corsair Commander Pro installed as well as a Corsair Lighting node Pro. Lots of fans, lighting strips, and RGB going on.
Your rig seems similar to mine. I have a Corsair Commander Core for the AIO, a 5-in-1 ARGB splitter for the fans, and a Lian Li Strimer controller. All crammed inside a single mATX case. :)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
|
kswildman
Superclocked Member
- Total Posts : 178
- Reward points : 0
- Joined: 2020/08/12 12:19:26
- Status: offline
- Ribbons : 2
Re: rjohnson11 PC update
2023/02/08 05:26:13
(permalink)
AMD Ryzen 7 5800X3d ASUS Strix X570-E Gaming 32GB G.SKILL Trident Z Neo CL16 3600 Corsair iCUE H170i Elite Capellix 420mm AIO SAMSUNG 980 PRO SSD 2TB - PCIe 4.0 NVMe SSD Corsair RM1200x Shift ASUS TUF RTX 4090 Lian Li Lancool Mesh III RGB
|
rmorse27
FTW Member
- Total Posts : 1071
- Reward points : 0
- Joined: 2008/04/25 18:47:29
- Location: Plaistow N.H.
- Status: offline
- Ribbons : 19
Re: rjohnson11 PC update
2023/02/09 07:00:09
(permalink)
nice rig and there is only so much you can do with cable management great job.
Intel i9 14900kf-Asus Z790 Rog Strix-E Wifi-Corsair 64GB @6400 DDR5-EVGA 3080TI FTW HC-EVGA G6 1000 PWS-Samsung Pro 2TB 4.0-Thermaletake Case-Corsair Pump/Res Combo http://www.heatware.com/eval.php?id=66896
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Re: rjohnson11 PC update
2023/02/09 07:45:52
(permalink)
Thanks everyone. Very much appreciated. Also thanks for everyone's inputs.
|
Flybye
FTW Member
- Total Posts : 1191
- Reward points : 0
- Joined: 2006/11/17 23:55:10
- Location: Miami (Cuba v2.1)
- Status: offline
- Ribbons : 4
Re: rjohnson11 PC update
2023/02/09 16:30:23
(permalink)
GJ on that psu! I bet it will make constant tinkering much easier. God I hate playing contortionist at times with the cases.
Gaming thing i9-12900KF @ 5.20GHzEVGA: Z690 Classified - RTX 3080 FTW3 Ultra - Supernova 1200w P3 - DG-75 32GBs Corsair Dominator DDR5 @ 6800 - Seagate: .5TB, 1TB M.2s, HD 4TBSony CRT 24" GDM-FW900 16:10 - DangerDen (RIP) Goodies: 2x120mm Rad & D5 + Primochill stuff
|
Delirious
EVGA Forum Moderator
- Total Posts : 11183
- Reward points : 0
- Joined: 2007/11/15 13:34:04
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: rjohnson11 PC update
2023/03/03 21:01:12
(permalink)
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Re: rjohnson11 PC update
2023/04/17 10:00:12
(permalink)
OK another great addition made today: 
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 84173
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: online
- Ribbons : 85
Re: rjohnson11 PC update
2023/04/17 10:00:52
(permalink)
Results: 
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8876
- Reward points : 0
- Joined: 2003/10/13 22:10:45
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: rjohnson11 PC update
2023/04/17 10:40:19
(permalink)
|
Flybye
FTW Member
- Total Posts : 1191
- Reward points : 0
- Joined: 2006/11/17 23:55:10
- Location: Miami (Cuba v2.1)
- Status: offline
- Ribbons : 4
Re: rjohnson11 PC update
2023/04/17 11:37:02
(permalink)
Drool
A shame even the EVGA Z790 only has pcie 4 m.2 slots. 😢
Gaming thing i9-12900KF @ 5.20GHzEVGA: Z690 Classified - RTX 3080 FTW3 Ultra - Supernova 1200w P3 - DG-75 32GBs Corsair Dominator DDR5 @ 6800 - Seagate: .5TB, 1TB M.2s, HD 4TBSony CRT 24" GDM-FW900 16:10 - DangerDen (RIP) Goodies: 2x120mm Rad & D5 + Primochill stuff
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30693
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: rjohnson11 PC update
2023/04/19 06:44:00
(permalink)
Did the performance increase after adding the new MP700?
It would be nice to see the results before you changed the M.2
Did you do a clean install or clone the old drive?
|