Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: ftw3 hybrid is a massive disappointment
2019/05/23 14:43:06
(permalink)
I would contact EVGA first and go the RMA route instead of tinkering with a €1400 card. :)
Maybe in the end you'll get a coupon or something to grab a different model.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: ftw3 hybrid is a massive disappointment
2019/05/23 14:54:22
(permalink)
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
lucidworld
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2014/03/07 23:32:26
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:13:51
(permalink)
AHowes
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Haha, it's almost like you're a paid lobbyist on EK's payroll...lol... I'm jk jk... But yeah, custom water loops definitely help out in these kinds of situations.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:16:25
(permalink)
lucidworld
AHowes
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Haha, it's almost like you're a paid lobbyist on EK's payroll...lol... I'm jk jk... But yeah, custom water loops definitely help out in these kinds of situations.
Don't You Mean EVGA Hydro Copper Water Block, not EK 
|
lucidworld
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2014/03/07 23:32:26
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:18:15
(permalink)
bcavnaugh
lucidworld
AHowes
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Haha, it's almost like you're a paid lobbyist on EK's payroll...lol... I'm jk jk... But yeah, custom water loops definitely help out in these kinds of situations.
Don't You Mean EVGA Hydro Copper Water Block, not EK
Of course, you're right. (Brought to you by Carl's Jr.)
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6681
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:37:01
(permalink)
Haha my wife wished I was getting paid by Evga or EK. Lol
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
Bepzinky
iCX Member
- Total Posts : 281
- Reward points : 0
- Joined: 2016/04/30 13:15:31
- Status: offline
- Ribbons : 2
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:48:18
(permalink)
AHowes
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Well I hope not!  but yeah when I ran 1080Ti's OC'ed I was seeing up to 40*C under full load on EK fullcover blocks.
|
lucidworld
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2014/03/07 23:32:26
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:52:32
(permalink)
Bepzinky
AHowes
36-39c max on load with an open loop and 70-72c room temp to give everyone an idea with custom cooling.
Well I hope not! but yeah when I ran 1080Ti's OC'ed I was seeing up to 40*C under full load on EK fullcover blocks.
70-72 °C...
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:56:51
(permalink)
|
Nazarus
iCX Member
- Total Posts : 252
- Reward points : 0
- Joined: 2019/03/02 22:40:56
- Location: Upstate NY
- Status: offline
- Ribbons : 6
Re: ftw3 hybrid is a massive disappointment
2019/05/23 15:59:16
(permalink)
Could always perform rocket surgery on it. Just kidding, but seriously you can take it apart without voiding the warranty and see if its a problem with the spread of thermal grease. Get some 90% isopropyl alcohol clean off what's there and put your own paste on. https://www.evga.com/supp...les/400-HY-1484-B1.pdf
Associates: RQAORCJB8JNEFOB/Affiliate: YTOQRPH9OK 
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: ftw3 hybrid is a massive disappointment
2019/05/23 16:00:18
(permalink)
Just add 12°C-18°C Temperature going from a GTX Graphics Card to an RTX Graphics Card whether on Air, Hybrid, or A Custom Water Loop.
|
degenerate
SSC Member
- Total Posts : 614
- Reward points : 0
- Joined: 2013/08/23 05:38:31
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/23 16:03:51
(permalink)
I understand your frustration with the pump noise, no doubt. I also agree that a 120mm rad is not optimal for cooling a 2080Ti. As far as your temps it's hard to say without being there to check things out but one thing is for sure; you aren't doing yourself any favors by having the radiator setup as case exhaust. If you can set it up as an intake you will most likely see an improvement in temps, 3-5 degrees cooler with potential for more. Fans don't really matter like they used to; outside of their noise profiles, the relative performance of all the "good" rad fans (ML's are on this list) are so close as to be almost negligible so I don't think switching fans will help in any way.
Failing that you can try to re-apply thermal paste and re-seat the cooler if you're up for it.
 |5900x|MSI B550 Unify-X|2x16GB G.Skill 3800 C14 @ 1900 FCLK|2TB WD SN850 M.2|EVGA 3090 KPE|EVGA 1600T2|Alienware '25' & LG 48" CX OLED|
|
M1aSocom2
New Member
- Total Posts : 32
- Reward points : 0
- Joined: 2018/09/07 05:52:06
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/24 14:25:49
(permalink)
Replace the TIM with something decent, Kryonaut, Noctua. Put 2 Noctua 2000 RPM Industrial fans in push pull. This worked for me and one other person so far. If you do this post a picture of the factory TIM application before cleaning if you can. Could be that 120mm rad is too small, but this seems to work. One think though, don't know about sinking another $50 into the card for the fans if you are looking at RMA. I did this to a 2080 Ti black card with hybrid kit for fun. It would be nice if everything shipped in top shape and performing perfectly, but that is the DIY cpu build world we are in. I have 2080's in a mining rig as well and I replaced TIM on two of them, common problem.
2700X, Asus CH7, 32GB G.Skill Sniper X DDR4-3200C14EVGA 2080 Ti Black w/ EVGA Hybrid KitNoctua NH-D15 CPU CoolerCorsair 750D Airflow Case Samsung 970 EVO SSD 512GB, 2x 850's 500GBEVGA Nu Audio cardCorsair HX1200iAsus PG278QR
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: ftw3 hybrid is a massive disappointment
2019/05/24 14:27:15
(permalink)
|
lucidworld
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2014/03/07 23:32:26
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/24 14:37:29
(permalink)
bcavnaugh
Or TF8 or MX-4
I'm kinda annoyed with myself for not repasting the TIM on my 2080 Ti Ultra, I should have at least tried that before going through with the RMA.
|
derzocker67
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2012/12/06 09:37:07
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/24 14:40:13
(permalink)
i've got enough kryonaut, this wont help with the annoying pump or saturated loop though
|
Nazarus
iCX Member
- Total Posts : 252
- Reward points : 0
- Joined: 2019/03/02 22:40:56
- Location: Upstate NY
- Status: offline
- Ribbons : 6
Re: ftw3 hybrid is a massive disappointment
2019/05/24 14:40:20
(permalink)
I'm glad I paid attention to pasting. I'm getting up to +50 on the core from my hybrid to hydro conversion compared to my hydro out of the box. But. They are SLI and case is mounted. No turning back now. Lol
Associates: RQAORCJB8JNEFOB/Affiliate: YTOQRPH9OK
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: ftw3 hybrid is a massive disappointment
2019/05/24 15:09:50
(permalink)
Sometimes the Case amplifies any sounds I've bought scraps of self-sticking sound absorbing "rubber" mat from my local custom audio installer - when this case side had a resonance issue 
|
rchiwawa
Superclocked Member
- Total Posts : 140
- Reward points : 0
- Joined: 2010/11/30 01:56:03
- Status: offline
- Ribbons : 1
Re: ftw3 hybrid is a massive disappointment
2019/05/24 21:27:11
(permalink)
lucidworld
bcavnaugh
Or TF8 or MX-4
I'm kinda annoyed with myself for not repasting the TIM on my 2080 Ti Ultra, I should have at least tried that before going through with the RMA.
Don't be. I repasted with Kyronaight after fiddling with trying to get my memory temps down on air and if my example is anything to go by, EVGA did a nice job. The stock paste for the 2080 TI FTW3 3 fan was very similar to Kyronaut; similar enough for me to consider it possible it was. The application was perfect and had just the right amount of squeeze out along the entire perimeter of the die and my GPU temps for a given fan speeds, loading, and ambient temperature were an exact match. The hybrid cooler kit I bought did not have the same paste on the pump body. The much less viscous TIM on the memory heat spreading plate was too silvery to be Kyronaut but did the job well. I just cleaned off the pump assembly's preapplied so I can give no reference there. I did cleaned off the preapplied when I went open loop and again went Kyronaut.
|
lucidworld
New Member
- Total Posts : 79
- Reward points : 0
- Joined: 2014/03/07 23:32:26
- Status: offline
- Ribbons : 0
Re: ftw3 hybrid is a massive disappointment
2019/05/25 14:45:46
(permalink)
rchiwawa
lucidworld
bcavnaugh
Or TF8 or MX-4
I'm kinda annoyed with myself for not repasting the TIM on my 2080 Ti Ultra, I should have at least tried that before going through with the RMA.
Don't be. I repasted with Kyronaight after fiddling with trying to get my memory temps down on air and if my example is anything to go by, EVGA did a nice job. The stock paste for the 2080 TI FTW3 3 fan was very similar to Kyronaut; similar enough for me to consider it possible it was. The application was perfect and had just the right amount of squeeze out along the entire perimeter of the die and my GPU temps for a given fan speeds, loading, and ambient temperature were an exact match.
The hybrid cooler kit I bought did not have the same paste on the pump body. The much less viscous TIM on the memory heat spreading plate was too silvery to be Kyronaut but did the job well. I just cleaned off the pump assembly's preapplied so I can give no reference there. I did cleaned off the preapplied when I went open loop and again went Kyronaut.
Thanks for the info, I feel a little better now. 
|