I went pushed some more +232 GPU +487 Mem offsets and got this

AHowes
Did you use the mouse to raise the bar? If you use the arrow key on the keyboard it won't raise the whole graph, just the single dot.

I grab it at the max voltage the card can use (1.093v) while holding down the control key and use the mouse to raise it to whatecver clock at that dot (2100mhz). That way it also raises the voltage across the bar. The reason I do it thst way is I suspect the lower clocks weren't as stable..like it wasn't using enough voltage.. so when the clocks would go lower in parts the card wasn't under enough stress to run max clocks.. it would lock up.

Thanks for the tip again. I was following the guide on overclockers.net which goes for balance and stability instead of raw power. Your way was much quicker.
 
I hit 2113.5 MHz during Superposition but my overall score was actually lower versus a cap at 2088. Perhaps because I had to lower the memory clock to prevent crashing above 2100 Mhz in a previous run. Still on stock Bios (slave, as if that matters).
 
I tried to validate that OC in GPU-Z but it only recorded my boost as 1733. I guess its not talking with Afterburner currently when the custom voltage curve is used.
 
Improved my score up to position 35 on the world chart (of people who actually paid to have their scores posted, lol). Up almost 200 points thanks to Ahowes' help. Thanks to the rest of the forum contributors as well. 
 

 
 
 
 
 
 
 

mhijazi
Hello,
 
Anyone tried to enable SLI lately ? I have been getting an error while importing the profile after adding the superposition SLI profile.
 

 
Yup, I just tried following Sajins instructions. Getting an error writing the profiles back into the driver. 390.77
 
Edit: Ok what I did was import the Superposition Sli Profile into the driver. I couldn't get the exported txt file to import back into the driver, but the provided profile in with the tool imported just fine. Fianlly able to run the BM in SLi. Yay!
 

Hi,
Did these last week 1080ti on x99 system
 

Interesting, 3 gtx 980 ti are faster than 4 gtx1070.
 

 

 

ThxDominator
4-way SLI
 

 
System spec:
Cosmos II custom watercooled dual loop.
Ivy i7 4930k @ 4.0 GHz - EK-Supremacy EVO full Nickel.
Asrock X79 Extreme 11 - Nateman_Doo Fullcover waterblock.
3x EVGA GTOh  980ti HydroCopper. + EVGA GTX 980ti Hybrid. EVGA 4-Way SLI Bridge.
32GB G.Skill (F3-19200CL-10Q2-32GBZHD 10-12-12-31. 1.65v) 4x8GB XMP 2400 DDR3.
8x OCZ Vertex3 120GB Raid-0. + 3x Western Digital Green 3TB Raid-0.
2x Intel 530 SSD 120GB Raid-0. + ASUS BW-12B1ST Blu-ray writer.
Koolance RP-452X2 Reservoir, 2x Swiftech MCP655 D5 Waterpump.
EVGA SuperNOVA 1600 G2. Windows 7 Ultimate 64bit.
3x Fujitsu P27T-6 IPS 2560x1440 Dp-Dp Surround 7680x1440 ( 8064x1440 )
 
 

Oh I see, it shows one gtx 980 ti aside.
 

Hi,
X299 rig needs tweaking :)
 

11624 now... https://benchmark.unigine...61481ea0f18bf71775ed42

Nice. What is your 8k optimized score?

Unigine and 3DMark video captures during benchmarks on my YouTube Channel in the same playlist.
 
My Build and Specs as of July 2018:  System Benchmarks
 

My best run.
https://benchmark.unigine...8a4970b9377eabc4d09537