HAZMAN_THE_GREAT
CLASSIFIED Member
- Total Posts : 4805
- Reward points : 0
- Joined: 2011/12/01 04:40:46
- Location: Planet Earth
- Status: offline
- Ribbons : 7
http://www.wired.com/2014/10/cody-wilson-ghost-gunner/ The Ghost Gunner is a small CNC milling machine that costs a mere $1200 and is capable of spitting out an aluminum lower receiver for an AR-15 rifle. This device allows people with no gunsmith training to assemble a working assault rifle at home with no licensing or serial number and it’s completely legal.  The Ghost Gunner itself is a small box about one foot on each side. Inside is an Arduino controller and a custom-designed spindle that holds a steel carbide drill bit. It works like any other CNC machine the drill spins up and moves in three dimensions to carve items out of blocks of metal. However, this machine is specifically intended to make an AR-15 lower receiver. That’s the part of a gun that connects the stock, barrel, and magazine. You could say it’s the “gun” part of a gun. It’s also the part that’s regulated by the ATF and assigned a serial number. Selling it without a license is illegal, but making it yourself is perfectly fine. An untraceable gun built without a serial number is often called a “ghost gun” by gun control advocates, so of course Defense Distributed borrowed the term to piss people off. The Ghost Gunner is capable of making anything that fits in the build envelope, as long as it’s created with Defense Distributed’s Physibles Development SDK (pDev) and distributed as a .dd file. Whether or not you agree with Defense Distributed on the value of untraceable firearms in a "free society", this is happening and regulation is miles behind the technological curve in which I must say, that I agree with this technology 100%.  Here is their website
|
Baltothewolf
CLASSIFIED Member
- Total Posts : 3655
- Reward points : 0
- Joined: 2012/03/23 23:27:34
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 04:05:17
(permalink)
This is awesome tbh. I can't watch the video because I'm at work, but I'm wondering if it can make other receivers if programmed right? I'd love to make myself a good 'ol AK-47, or M4/M16/etc etc. After reading the entire article, all I can say is lol. Leaving politics/other personal opinions out of the equation, wether you have to have a serial on it or not, a mentally unstable person, or criminal is going to find a way to kill whoever it is they want dead. Nobody carries guns around, so a Katana or Machete is just as effective as an AR15 is at killing say, college students? Or random people in a movie theater? I remember reading an article about a mentally unstable guy went on a rampage with a kitchen knife in China or one of those countries at a school, killing like 30-50 kids or something like that. Seriously, cops take 7-15 minutes to respond. How many people could someone kill in that amount of time?
post edited by Baltothewolf - 2014/10/05 04:17:42
My Laptop (GE63VR-7RF): - 7700HQ. - 16GB RAM. - GTX 1070. - 128GB SSD.- 1X 1TB 7200 spinny drive. 
|
Violence.
FTW Member
- Total Posts : 1501
- Reward points : 0
- Joined: 2011/11/12 14:06:57
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 08:17:13
(permalink)
this will SO help sort the stupid from society. Im all for this thing!
|
HAZMAN_THE_GREAT
CLASSIFIED Member
- Total Posts : 4805
- Reward points : 0
- Joined: 2011/12/01 04:40:46
- Location: Planet Earth
- Status: offline
- Ribbons : 7
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 09:04:48
(permalink)
Baltothewolf
This is awesome tbh. I can't watch the video because I'm at work, but I'm wondering if it can make other receivers if programmed right? I'd love to make myself a good 'ol AK-47, or M4/M16/etc etc.
After reading the entire article, all I can say is lol. Leaving politics/other personal opinions out of the equation, wether you have to have a serial on it or not, a mentally unstable person, or criminal is going to find a way to kill whoever it is they want dead. Nobody carries guns around, so a Katana or Machete is just as effective as an AR15 is at killing say, college students? Or random people in a movie theater? I remember reading an article about a mentally unstable guy went on a rampage with a kitchen knife in China or one of those countries at a school, killing like 30-50 kids or something like that. Seriously, cops take 7-15 minutes to respond. How many people could someone kill in that amount of time?
They can kill a lot bro. Just chunk a grenade and there you go. Or use some type of homemade explosive device. Many people tend to forget that you can use off the shelf cleaning products that you can mix together to make a gas and harm people as well. Also I remember that China stabbing that you mentioned. Its actually 22 children in which you can find the article here. But anyways if I do get one of these parts, I am going to cerakote the receiver to a coyote tan just like my gun in my picture as well as the other parts to the AR-15. I would want mine to look this. I just would need to find some one who knows how to do it as perfect as can be.
|
Chrome-M-Dragon
CLASSIFIED ULTRA Member
- Total Posts : 7522
- Reward points : 0
- Joined: 2009/01/17 05:35:05
- Location: Down the rabbit hole...
- Status: offline
- Ribbons : 30
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 09:08:28
(permalink)
People are, well, only Human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in america. -James Inhofe Use any of the codes below for a free hug and a high five! Much love to all you wonderful nerds! Associate: 5L1LJB5JQ94H892 Affiliate Code: QRXQKO8ZJS
|
Violence.
FTW Member
- Total Posts : 1501
- Reward points : 0
- Joined: 2011/11/12 14:06:57
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 10:17:16
(permalink)
someone buy this and make me one of these. 
|
MSim
Omnipotent Enthusiast
- Total Posts : 9320
- Reward points : 0
- Joined: 2005/05/22 23:13:30
- Location: Earth
- Status: offline
- Ribbons : 38
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 10:38:48
(permalink)
Would be perfect to do a group buy with friends/family. That or be able to rent one.
|
Baltothewolf
CLASSIFIED Member
- Total Posts : 3655
- Reward points : 0
- Joined: 2012/03/23 23:27:34
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 22:32:55
(permalink)
Violence.
someone buy this and make me one of these.
That is a beautiful gun! What is it?
My Laptop (GE63VR-7RF): - 7700HQ. - 16GB RAM. - GTX 1070. - 128GB SSD.- 1X 1TB 7200 spinny drive.
|
Fennicillin
iCX Member
- Total Posts : 391
- Reward points : 0
- Joined: 2013/12/07 19:44:52
- Status: offline
- Ribbons : 0
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 23:21:18
(permalink)
It's a Nomad model AR-15 from Jesse Jame's firearm business venture.
|
Brad_Hawthorne
Insert Custom Title Here
- Total Posts : 17994
- Reward points : 0
- Joined: 2004/06/06 16:13:06
- Location: Dazed & Confused
- Status: offline
- Ribbons : 39
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 23:29:13
(permalink)
This is so dumb in many ways. Just get a normal CNC, not one where they are just making it to have people troll politics back and forth between talking heads. This has irrational people on both side circling it like vultures. A regular CNC machine does the same things minus to drama queens. All this is, is shrewd marketing and playing people as irrational fools about a topic they are fanatic about.
post edited by Brad_Hawthorne - 2014/10/05 23:32:18
|
wrinvert
R.I.P Friend
- Total Posts : 3396
- Reward points : 0
- Joined: 2007/05/01 19:32:12
- Location: lost forever
- Status: offline
- Ribbons : 17
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/05 23:47:38
(permalink)
You also need to start with 80% pre machined lower. This is just a pre-programed cnc finishing box. Brad is mostly right its gimmic marketing, that being said i thought about buying one. I build 4-5 ar's a year for people and it would be kind of cool to have my own logo on it.
Violence you know you cant have one jersey boy. Make a trip out here and we will open up the safe.
|
Baltothewolf
CLASSIFIED Member
- Total Posts : 3655
- Reward points : 0
- Joined: 2012/03/23 23:27:34
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/06 00:57:33
(permalink)
+1 on the marketing gimmicks, but I'm to stupid to buy a cnc and do it myself, so this 'plug and play' is good for people like me.
My Laptop (GE63VR-7RF): - 7700HQ. - 16GB RAM. - GTX 1070. - 128GB SSD.- 1X 1TB 7200 spinny drive.
|
seth89
CLASSIFIED Member
- Total Posts : 4420
- Reward points : 0
- Joined: 2007/11/13 11:26:18
- Status: offline
- Ribbons : 14
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/06 20:49:06
(permalink)
OR
you can save 1,200 bucks and buy an entire ar-15, and have money left over to mod it.
|
HAZMAN_THE_GREAT
CLASSIFIED Member
- Total Posts : 4805
- Reward points : 0
- Joined: 2011/12/01 04:40:46
- Location: Planet Earth
- Status: offline
- Ribbons : 7
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/07 02:25:48
(permalink)
seth89
OR
you can save 1,200 bucks and buy an entire ar-15, and have money left over to mod it.
Or you can just buy the 3D printed receiver and then just buy the rest of the pieces to put together. Then you will be able to have a gun that has no stupid serial number so you can avoid the unconstitutional gun registration. 
|
srtie4k
FTW Member
- Total Posts : 1589
- Reward points : 0
- Joined: 2010/11/05 05:11:13
- Location: New Hampster
- Status: offline
- Ribbons : 2
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/07 05:03:52
(permalink)
I'll just buy a full used AR15 for half that price, without having to use a FFL, and still not have to worry about registering it. Thank you NH gun laws!
Gaming Rig:Corsair Vegeance C70, Swiftech H220, Intel i7-3770K @ 4.5GHz (1.24V), Asus Sabertooth Z77, Corsair AX860, 16GB Corsair Vegeance DDR3-1600 CL9 1.35V, EVGA GTX 670 FTW, SanDisk Extreme 240GB SSD, Dell 2408WFP, Corsair K70 Cherry Red, Corsair M65, Logitech Z-5500 5.1 Steambox/HTPC: Lian Li PC-Q01A, AMD A10-7800, ASRock FM2A88X-ITX, Seasonic ST30SF, 8GB Samsung DDR3-1600 @ 1866, Samsung 840 Evo 250GB MSATA SSD Affiliate Code: KKDMX98FNV
|
HAZMAN_THE_GREAT
CLASSIFIED Member
- Total Posts : 4805
- Reward points : 0
- Joined: 2011/12/01 04:40:46
- Location: Planet Earth
- Status: offline
- Ribbons : 7
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/07 05:34:25
(permalink)
srtie4k
I'll just buy a full used AR15 for half that price, without having to use a FFL, and still not have to worry about registering it. Thank you NH gun laws!
Man your lucky! I hate that stupid FFL crap so ridiculous. I dont know brotha some people dont treat and take care of their guns right so I am very anal about getting a used gun. I mean if the buyer would allow you to test fire and cycle a couple hundred rounds through it before you make a deal then I will feel more comfortable with doing it. But I suggest you bringing your favorite ammunition grain for that type of caliber on whatever the seller's gun is.
|
Rudster816
CLASSIFIED Member
- Total Posts : 2080
- Reward points : 0
- Joined: 2007/08/03 22:07:51
- Location: Eastern Washington
- Status: offline
- Ribbons : 18
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/07 09:00:26
(permalink)
Or I can save about $1050 plus the cost of the Aluminum billet and the huge headache of trying to learn how to use a CNC for the first time and just buy a stripped lower online and have it shipped to a local FFL, pay them $20 to do the transfer to me and viola I have my lower. If you live in a state where AR-15's are legal, then why the hell would you buy a CNC just to make the lowers? The only reason you would want to make your own lowers is if you can't pass the background check, they're illegal in your state, or you already own a milling machine and you want to save a few bucks and enjoy making your own.
[22:00:32] NordicJedi: the only way i can read this chatroom is if i imagine you're all dead  
|
Kanti
CLASSIFIED Member
- Total Posts : 4110
- Reward points : 0
- Joined: 2009/12/12 16:29:32
- Location: Kung Fu Island
- Status: offline
- Ribbons : 4
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 01:00:31
(permalink)
Say the Ghost Gunner is a "gimmick". What CNC mill can finish, or better yet, create a complete lower receiver from a block of aluminum for $1200 or less? based off what I've read such mills cost several thousand dollars.
 Muh 'filiate code: 387JKEF57G
|
nateman_doo
Omnipotent Enthusiast
- Total Posts : 8452
- Reward points : 0
- Joined: 2008/01/16 16:16:54
- Location: NOT the Jersey shore
- Status: offline
- Ribbons : 56
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 04:48:26
(permalink)
wrinvert
You also need to start with 80% pre machined lower. This is just a pre-programed cnc finishing box. Brad is mostly right its gimmic marketing, that being said i thought about buying one. I build 4-5 ar's a year for people and it would be kind of cool to have my own logo on it.
Violence you know you cant have one jersey boy. Make a trip out here and we will open up the safe.
Oh...us Jersey folks can own it... after all its just a CNC ;) I had this huge long post written up, but it didn't work. argh!
|
seth89
CLASSIFIED Member
- Total Posts : 4420
- Reward points : 0
- Joined: 2007/11/13 11:26:18
- Status: offline
- Ribbons : 14
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 07:57:14
(permalink)
Yeah buying a stripped lower and adding the parts you need is probably better too.
This is just a gimmick to make people mad. If anything it hurts gun rights.
For example when those guys made the plastic lower from a 3D printer during the height of this anti gun movement it just made more fear and laws against guns.
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2625
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 09:31:46
(permalink)
lol it's kinda cool. I guess you could always look for the source code for the arduino.
|
Kanti
CLASSIFIED Member
- Total Posts : 4110
- Reward points : 0
- Joined: 2009/12/12 16:29:32
- Location: Kung Fu Island
- Status: offline
- Ribbons : 4
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 20:48:44
(permalink)
I'm still looking into an affordable and easy way to finish or even make a lower receiver. I've seen people talk about jigs and drill presses. I don't know.... If I invest a fat chunk of change I'd like to be able to do more than just ARs. Maybe AKs or teeny tiny figurines or something. I don't know. Gotta recoup that investment cost somehow...
Muh 'filiate code: 387JKEF57G
|
new2019
SSC Member
- Total Posts : 994
- Reward points : 0
- Joined: 2010/11/01 05:57:44
- Status: offline
- Ribbons : 0
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 23:13:56
(permalink)
This looks really cool. If I import them the customs would not let me have it for sure.,
EVGA SR2 | X5650 | X5650 | Corsair Dominator |  
|
wrinvert
R.I.P Friend
- Total Posts : 3396
- Reward points : 0
- Joined: 2007/05/01 19:32:12
- Location: lost forever
- Status: offline
- Ribbons : 17
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/08 23:16:18
(permalink)
nateman_doo
wrinvert
You also need to start with 80% pre machined lower. This is just a pre-programed cnc finishing box. Brad is mostly right its gimmic marketing, that being said i thought about buying one. I build 4-5 ar's a year for people and it would be kind of cool to have my own logo on it.
Violence you know you cant have one jersey boy. Make a trip out here and we will open up the safe.
Oh...us Jersey folks can own it... after all its just a CNC ;)
I had this huge long post written up, but it didn't work. argh!
nateman I was referring to the ar-15 pic he posted.
|
Violence.
FTW Member
- Total Posts : 1501
- Reward points : 0
- Joined: 2011/11/12 14:06:57
- Status: offline
- Ribbons : 5
Re: The $1,200 CNC Machine That Lets Anyone Make a Metal AR-15 Gun at Home.
2014/10/09 12:33:13
(permalink)
wrinvert
You also need to start with 80% pre machined lower. This is just a pre-programed cnc finishing box. Brad is mostly right its gimmic marketing, that being said i thought about buying one. I build 4-5 ar's a year for people and it would be kind of cool to have my own logo on it.
Violence you know you cant have one jersey boy. Make a trip out here and we will open up the safe.
cant have auto. they took all the fun away with the laws here. thats why i dont own guns. all the ones i want i cant have
|