alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Hey guys, Welcome back to another one of my builds logs! I'm happy to announce my entry into the 2017 Cooler Master CaseMod World Series in the MasterCase Maker 5t. It's a stunning looking case and I'm excited to work on it. I have a few interesting things planned for it, including some layout changes on the inside and a more unique water cooling loop set-up. I am calling this one Tempest and it will be based on the Tempest spaceship from the new Mass Effect Andromeda game. I did an overview video of the case as well as talked a bit about the mods where you can get a better idea of what I'm going to do in this case. Check it out below: https://www.youtube.com/watch?v=Qa7iU1mBc1w SPECS: Case - Cooler Master MasterCase Maker 5t CPU - Intel TBC MB - ASUS Rampage V Extreme RAM - 8 x 4GB Crucial Ballistix Elite 3000MHz DDR4 GPU - NVIDIA TBC SSD - 2 x 275GB Crucial MX300 HDD - Seagate TBC PSU - Cooler Master V1000 Custom cables & lighting - CableMod Water Cooling - Bitspower I'll start it off with some photos of the gorgeous case: Thanks for checking it out and stay tuned for more Cheers, Alex
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31005
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/03/26 16:43:39
(permalink)
Interesting stock case your using
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/01 05:16:33
(permalink)
Cool GTX Interesting stock case your using
Cheers! The Maker 5t is definitely already pretty nice, hope I can make it even better :)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/03 09:31:19
(permalink)
I'm very interested in what type of cuts you intend on making.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/04 06:01:51
(permalink)
rjohnson11 I'm very interested in what type of cuts you intend on making.
Haha stay tuned :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/04 07:02:40
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/08 03:51:21
(permalink)
You're making three great mods at one time. Each one is just awesome.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/08 18:02:17
(permalink)
rjohnson11 You're making three great mods at one time. Each one is just awesome.
Thanks Robert! It's hard to keep up at the moment, I just need to keep working on them with no time for anything else...
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/08 18:31:27
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/09 01:11:54
(permalink)
Looking forward to more progress as time permits.
|
XrayMan
Insert Custom Title Here
- Total Posts : 73000
- Reward points : 0
- Joined: 2006/12/14 22:10:06
- Location: Santa Clarita, Ca.
- Status: offline
- Ribbons : 115
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/09 13:33:28
(permalink)
Nice progress. Waiting for more work to be done. =)
My Affiliate Code: 8WEQVXMCJL Associate Code: VHKH33QN4W77V6A  
|
MitchWh
Superclocked Member
- Total Posts : 146
- Reward points : 0
- Joined: 2017/04/10 14:18:42
- Status: offline
- Ribbons : 0
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/11 14:17:16
(permalink)
Looks interesting! The red color inside looks good. Is this stock or did you already paint it?
post edited by MitchWh - 2017/04/11 21:01:35
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/14 06:10:56
(permalink)
XrayMan Nice progress. Waiting for more work to be done. =)
Thanks mate! I've made a bit more progress since, I should have an update very soon :)
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/26 06:58:47
(permalink)
Hey guys, Sorry for the lack of updates on this build but unfortunately that's what happens when you're working on 3 case mods at the same time and they all have to be finished at the same time. Plus I've got my full time job on top of that. Been super busy lately. What I'm gonna do however is focus on getting this build log ready and finishing this build as it has to be done and submitted for the Cooler Master Case Mod World Series by the 3rd of May. So here is the progress that I've made so far. The PSU has been mounted in it's new location, I have a new motherboard tray that is mounted over the existing one to maintain the case rigidity, the back panel has been completely cut out and a new panel installed that has a 240 radiator mount and the I/O is in the top. I also have the extra 'top' exterior panel mounted on the back. There is also a cut out in the mid-tray section with a piece of acrylic mounted over it. This is for the pass-through fittings later. You will also see an acrylic panel in the bottom and a piece on the back. I hope that all makes sense but I'll have a video in the end explaining it all and showing more of the actual progress for those interested. I have to give a huge shout out to Corey from Imfaceroll Gaming for the help in cutting the aluminium panels on his CNC machine. Otherwise I don't know how I would have had time to get this done for the submission date. Also thanks to Justin from Metalicacid for the tips on how to brush my aluminium panels. I think minus some of the deeper scratches they all came out really good. Most of that will be covered anyways. So here are the photos guys! I forgot to mention the cut out in the front panel as well. Hope you guys enjoy the progress so far and stay tuned, there will be a lot more photos to come! Cheers, Alex
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/27 09:02:53
(permalink)
Hey guys, Here's some quick pics of the motherboard going in. I know the Rampage V Extreme is a bit old now however it will match the theme perfectly :) Also, huge shout out to Mwave Australia for sending over a 6850K for the build! Time to get some water blocks on :D Thanks for checking it out! Cheers, Alex
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/27 09:41:45
(permalink)
Looking great as always Alex. By the way when are you going to make me a mod? LOL. Just kidding.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/28 09:21:00
(permalink)
|
joeymir
SSC Member
- Total Posts : 732
- Reward points : 0
- Joined: 2007/04/09 16:45:56
- Location: Oregon
- Status: offline
- Ribbons : 4
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/28 12:52:10
(permalink)
Gonna be a great looking build when done! looking forward to seeing final build!
Gigabyte X570 Aorus Master | Ryzen 9 5900X | 32GB Crucial Ballisitx DDR4 3600MHz | MSI Radeon 6900 XT | Samsung 950 Pro 512GB | 2x Crucial MX500 1TB Raid-0 | 2x WD Velociraptors 500GB Raid-0 | Seasonic Focus Platinum 850W | Lian-Li PC-O11
|
Jszupiany
Superclocked Member
- Total Posts : 103
- Reward points : 0
- Joined: 2004/01/22 17:32:29
- Status: offline
- Ribbons : 0
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/28 14:22:33
(permalink)
Those water blocks are look SO pretty to look at. Can't wait to see them wet. I noticed you say "a more unique water cooling loop set-up", are you going to use a single loop, or multiple loops?
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/04/29 00:36:20
(permalink)
This continues to impress.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/01 04:55:18
(permalink)
j2345912 Gonna be a great looking build when done! looking forward to seeing final build!
Thanks a lot, the build log should be wrapping up soon :D Jszupiany Those water blocks are look SO pretty to look at. Can't wait to see them wet. I noticed you say "a more unique water cooling loop set-up", are you going to use a single loop, or multiple loops?
Hehe thanks man! It will be a single loop but it will be different than the way I usually do my loops :) rjohnson11 This continues to impress.
Thanks a lot Robert :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/01 04:56:31
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/01 06:46:31
(permalink)
Continues to amaze as does all of your mods Alex.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/02 01:31:25
(permalink)
rjohnson11 Continues to amaze as does all of your mods Alex.
Thanks a lot Robert :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/02 01:36:51
(permalink)
|
rjohnson11
EVGA Forum Moderator
- Total Posts : 102313
- Reward points : 0
- Joined: 2004/10/05 12:44:35
- Location: Netherlands
- Status: offline
- Ribbons : 84
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/02 02:08:11
(permalink)
|
nikkocortez
CLASSIFIED Member
- Total Posts : 2884
- Reward points : 0
- Joined: 2010/02/01 10:04:03
- Status: offline
- Ribbons : 14
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/02 07:15:01
(permalink)
Very nice! I'm really digging the chrome hardline tubing and fittings.
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/03 04:43:04
(permalink)
rjohnson11 This looks so good....
nikkocortez Very nice! I'm really digging the chrome hardline tubing and fittings.
Thanks a lot guys :D
|
alexciobanu
SSC Member
- Total Posts : 576
- Reward points : 0
- Joined: 2015/01/02 00:39:07
- Location: Sydney, Australia
- Status: offline
- Ribbons : 21
Re: Tempest (modded CM MasterCase Maker 5t) by SimpleModz
2017/05/03 04:48:13
(permalink)
|