EVGA

Helpful ReplyHot!Technical help with getting B360 to boot to BIOS

Page: < 123 Showing page 3 of 3
Author
Blaingerie
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2019/07/24 16:53:07
  • Status: offline
  • Ribbons : 0
Re: Technical help with getting B360 to boot to BIOS 2019/08/12 16:46:14 (permalink)
UPDATE: Windows 10 64 bit is now installed! After being stuck in the world of no answers, I looked around in BIOS, noticed that the version was 1.02, and threw the 1.07 update into the system. Being on 1.02 must've been the problem, since it installed perfectly fine after that! 

I am on the homepage of windows 10, but I need to update all the drivers, since I'm unable to get onto the internet to do so (missing network adaptor). Using the USB that evga sent, which tools do I run to update the whole shebang? (screen resolution, internet, etc)
#61
Sajin
EVGA Forum Moderator
  • Total Posts : 37682
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 195
Re: Technical help with getting B360 to boot to BIOS 2019/08/12 17:53:01 (permalink)

 
The usb contains drivers your system needs to operate correctly, so I would just install them all.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#62
Blaingerie
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2019/07/24 16:53:07
  • Status: offline
  • Ribbons : 0
Re: Technical help with getting B360 to boot to BIOS 2019/08/13 04:11:40 (permalink)
Aight everything is up and running. All i have left is installing the fans into the case. thanks for all your help!
#63
Blaingerie
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2019/07/24 16:53:07
  • Status: offline
  • Ribbons : 0
Re: Technical help with getting B360 to boot to BIOS 2019/08/13 09:24:47 (permalink)
Last question: how do you install the rear fans on the rear panel? Are you able to take off the black panel to get on the smaller one underneath? (Like the panel on the top of the case is able to be popped off to install the fans, and the front panel can be popped off to install the fans - can the back panel be popped off?
#64
Sajin
EVGA Forum Moderator
  • Total Posts : 37682
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 195
Re: Technical help with getting B360 to boot to BIOS 2019/08/13 10:59:26 (permalink)

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#65
Blaingerie
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 2019/07/24 16:53:07
  • Status: offline
  • Ribbons : 0
Re: Technical help with getting B360 to boot to BIOS 2019/08/13 12:02:40 (permalink)
I think you're referring to the "press the button on the right side, then you can remove the cover, from there pull out filter". But the cover seems completely latched in on the top, i don't precisely see how its removed except by breaking apart those latches.
#66
Sajin
EVGA Forum Moderator
  • Total Posts : 37682
  • Reward points : 0
  • Joined: 2010/06/07 21:11:51
  • Location: Texas, USA.
  • Status: offline
  • Ribbons : 195
Re: Technical help with getting B360 to boot to BIOS 2019/08/13 12:20:41 (permalink)
I don't actually own the case, so I'm just providing you with what the manual says. I watched a video online about the case, and the left side button will allow you to access the back two fans by allowing the door to swing open. The front fans can be accessed by just removing the dust filter on the front of the case. Simply press down on the dust filter in the front to make it unlatch itself from the case.

Want to save 5 to 10% on your next EVGA purchase? Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it.
 

 
#67
Page: < 123 Showing page 3 of 3
Jump to:
  • Back to Mobile