EVGA

***Show us your 3000 Series GPU***

Page: << < ..678910.. > >> Showing page 9 of 30
Author
Post
Essentials Only Full Version
patotoy
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2021/01/28 00:33:28
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/01/30 05:11:43 (permalink)
Acrab67



Hi there!
 
Does the adjacent pcie slot (3rd slot) usable with the 2.2 slot RTX 3070 XC3 Ultra?
#241
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/01/30 08:47:51 (permalink)
Coming soon, an update with my first-ever vertically mounted GPU - something I once upon a time said I'd never do because it's "pointless" - that was before I saw the glory that is the bare copper goodness of a 3090 Kingpin... I mean, who wouldn't want to at least occasionally just stare at that & go "wow that's hot":
 


ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#242
pesho4589
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2016/12/03 01:47:17
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/01/30 14:43:31 (permalink)
3080 FTW3 ULTRA
 


Intel® Core™ i7-8700K 5.1Ghz<>ASUS ROG MAXIMUS X APEX<>EVGA GeForce RTX 3080 FTW3 ULTRA GAMING<>Patriot Viper Steel 16GB 4400MHz<>Gigabyte XTREME GAMING XP1200M Platinum<>EVGA DG-77 Matte Black Mid-Tower<>Acer Predator XB271HU 165Hz

#243
NIkolas_D
New Member
  • Total Posts : 38
  • Reward points : 0
  • Joined: 2013/02/12 10:55:31
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/01/30 15:54:47 (permalink)
Re: ***Show us your 3000 Series GPU***

Attached Image(s)

#244
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2021/02/01 07:26:58 (permalink)
straha20
Here's my 3090 FTW3...
 

 

 

 





Very nice custom rig you got there. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#245
richardgoncalves
Superclocked Member
  • Total Posts : 146
  • Reward points : 0
  • Joined: 2020/09/18 10:06:37
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/01 08:19:15 (permalink)
Quick pic of build without plumbing and a few cables to be tucked away.  I would have finished; but couldn't find my silicone insert for bending - have frosted corsair acrylic for tubing.
 
Booted her up dry just to make sure she'd post and she did - only had her on for 20 seconds.
 
Will post updated pic when she's hydrated.  Also have a 3090FTW3 build I'm working on now; but that EK block still hasn't arrived.
 
 

Attached Image(s)

#246
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/02/01 10:27:41 (permalink)
Nice monoblock setup.  If I wasn't going to go the 11900K/Z590 route, I'd be getting one of those for my Z390 - EK makes one that's quite nice:
 

 
I'm looking forward to having all that Copper staring at me once I have the Kingpin vertically mounted with an eVGZ Z590 Dark - only a few months away, hopefully... we'll see how hard it is to get ahold of an 11900K.
post edited by Dabadger84 - 2021/02/01 11:39:22

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#247
richardgoncalves
Superclocked Member
  • Total Posts : 146
  • Reward points : 0
  • Joined: 2020/09/18 10:06:37
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/01 11:28:43 (permalink)
Dabadger84
Nice monoblock setup.  If I was going to go the 11900K/Z590 route, I'd be getting one of those for my Z390 - EK makes one that's quite nice:
 

 
I'm looking forward to having all that Copper staring at me once I have the Kingpin vertically mounted with an eVGZ Z590 Dark - only a few months away, hopefully... we'll see how hard it is to get ahold of an 11900K.


That is a nice looking block. I forget why I went with Bitspower for the monoblock; I think I just preferred the way it looked I think.

Good luck with your build!
#248
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/02/03 15:54:08 (permalink)

 
I did a thing... the vertical mounting bracket for my case was not compatible with the riser cable... so the only thing holding the card (which is actually fairly rigid, surprisingly) is the slot-brackets.
Bout to fire up a test followed by some gaming & see how it goes, riser cable is only 220mm so I'm assuming the performance loss will be basically nothing since this cable came recommended from several forum members that use it.
Installed lil' heatsinks on the back of the card before putting it vertical, got a fan back there blowing air over them, the fan you can see behind it in the pic is actually close to the motherboard blowing air over the M.2 drive areas.

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#249
spacedest
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2013/09/11 11:50:48
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/05 16:44:38 (permalink)
EDIT: Can't add picture because I don't have 9 post yet. 

I'll be back.
#250
Epsilon1190
New Member
  • Total Posts : 47
  • Reward points : 0
  • Joined: 2013/04/14 13:22:58
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/06 00:07:50 (permalink)
old Corsair air 540 case :D




CASE: DISMASTECH ΒENCH TABLE CPU: Ι7-3960Χ+EK-W/C RAM: 32GB KINGSTON hyperX BEAST 2400 QUAD CH MOBO: RAMPAGE IV EXTREME PSU: THERMALTAKE 1200W GPU: EVGA GTX ΤΙΤΑΝ SLI SC EK-W/C / GTX 780Ti EVGA acx SC
HDD: SSD OCZ AGILITY3+WD 2TB DRIVES: LG DVD-LG BLURAY WRITER MONITOR: DELL ULTRASHARP U2713H SPEAKERS: LOGITECH Z-5500 KEYBOARD: LOGITECH G19
#251
AdrianProper
New Member
  • Total Posts : 28
  • Reward points : 0
  • Joined: 2020/11/12 15:36:24
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2021/02/06 10:43:36 (permalink)

#252
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2021/02/07 09:04:31 (permalink)
richardgoncalves
Quick pic of build without plumbing and a few cables to be tucked away.  I would have finished; but couldn't find my silicone insert for bending - have frosted corsair acrylic for tubing.
 
Booted her up dry just to make sure she'd post and she did - only had her on for 20 seconds.
 
Will post updated pic when she's hydrated.  Also have a 3090FTW3 build I'm working on now; but that EK block still hasn't arrived.
 
 




Don't forget to post back once it's all said and done. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#253
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2021/02/09 09:19:24 (permalink)
Epsilon1190
old Corsair air 540 case :D





 
Nice clean build. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#254
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/02/09 16:37:00 (permalink)
Testin' some new heatsinkarinos:
 

If they work anywhere near as well as the originals I had on there, this should be a hoot in terms of temperature reductions:


ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#255
Clovis559
SSC Member
  • Total Posts : 563
  • Reward points : 0
  • Joined: 2020/09/18 13:53:08
  • Status: offline
  • Ribbons : 3
Re: ***Show us your 3000 Series GPU*** 2021/02/09 18:29:51 (permalink)
Dabadger84

 
I did a thing... the vertical mounting bracket for my case was not compatible with the riser cable... so the only thing holding the card (which is actually fairly rigid, surprisingly) is the slot-brackets.
Bout to fire up a test followed by some gaming & see how it goes, riser cable is only 220mm so I'm assuming the performance loss will be basically nothing since this cable came recommended from several forum members that use it.
Installed lil' heatsinks on the back of the card before putting it vertical, got a fan back there blowing air over them, the fan you can see behind it in the pic is actually close to the motherboard blowing air over the M.2 drive areas.




That is sexy for SURE. Hey did you loose any performance on the extender? I have two extenders and one that was quite long, I lost huge performance on. I went back to the short one, but eventually I went back to just right in the motherboard. (Never really tested if I had performance loss on the short one)
 
Good luck with the new fins!
#256
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/02/09 18:36:17 (permalink)
Clovis559
That is sexy for SURE. Hey did you loose any performance on the extender? I have two extenders and one that was quite long, I lost huge performance on. I went back to the short one, but eventually I went back to just right in the motherboard. (Never really tested if I had performance loss on the short one)
 
Good luck with the new fins!



As far as I could tell, the Phanteks 220mm riser cable I ended up getting did not meaningfully effect my performance in any way.
 
I've been back to the card being directly in the slot for a few days now because of issues with my benchmark scores... which I've traced back to probably being the result of a Windows update AKA I'm boned on trying to hit 15.4k again.  I tried a FRESH Windows install on a solo drive with no other drives installed, got just Windows, the base drivers needed, and NVidia's 461.40s, then 3DMark installed, and got a ridiculously low stock score - Previously I got as high as 13.9k, almost 14k, at stock GPU with 5GHz CPU...  now I'm lucky to get more than 13.6k at stock GPU with 5GHz CPU.
 
Eventually I might go back to vertical mounting, it's going to depend on whether or not I can figure out how to mount the fan on the back of the card with it vertically mounted.

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#257
Clovis559
SSC Member
  • Total Posts : 563
  • Reward points : 0
  • Joined: 2020/09/18 13:53:08
  • Status: offline
  • Ribbons : 3
Re: ***Show us your 3000 Series GPU*** 2021/02/09 18:40:27 (permalink)
Dabadger84
Clovis559
That is sexy for SURE. Hey did you loose any performance on the extender? I have two extenders and one that was quite long, I lost huge performance on. I went back to the short one, but eventually I went back to just right in the motherboard. (Never really tested if I had performance loss on the short one)
 
Good luck with the new fins!



As far as I could tell, the Phanteks 220mm riser cable I ended up getting did not meaningfully effect my performance in any way.
 
I've been back to the card being directly in the slot for a few days now because of issues with my benchmark scores... which I've traced back to probably being the result of a Windows update AKA I'm boned on trying to hit 15.4k again.  I tried a FRESH Windows install on a solo drive with no other drives installed, got just Windows, the base drivers needed, and NVidia's 461.40s, then 3DMark installed, and got a ridiculously low stock score - Previously I got as high as 13.9k, almost 14k, at stock GPU with 5GHz CPU...  now I'm lucky to get more than 13.6k at stock GPU with 5GHz CPU.
 
Eventually I might go back to vertical mounting, it's going to depend on whether or not I can figure out how to mount the fan on the back of the card with it vertically mounted.




I had a problem too just like yours the other day, I hit 15,1 - 15,2 easy, then out of no where I couldn't hit 13,9. I didn't change anything, I eventually just started getting 15's again. I want to push farther but I'm redoing the loop tomorrow, so I think then I will. Also adding my CPU to the loop, which might let me push that farther and push out a few more grapes. I'm tempted to just have a Hard drive for benchmarking, minimal apps installed.
#258
Infinite01
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2020/04/12 06:46:44
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/10 11:38:27 (permalink)
This is one of my favorite custom rig
#259
Ajax0z
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2015/04/11 05:59:24
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/10 14:11:57 (permalink)

O11 Dynamic Razer with the 3090 Ultra sitting on the new EK vertical mount... works a treat!
post edited by Ajax0z - 2021/02/10 14:15:59

Attached Image(s)

#260
EVGATech_DanielM
EVGA Tech Support
  • Total Posts : 1132
  • Reward points : 0
  • Joined: 2017/07/07 19:01:01
  • Status: offline
  • Ribbons : 2
Re: ***Show us your 3000 Series GPU*** 2021/02/10 18:51:17 (permalink)
Some cool builds 
 
 
#261
recipe7
Superclocked Member
  • Total Posts : 194
  • Reward points : 0
  • Joined: 2008/05/06 22:46:01
  • Status: offline
  • Ribbons : 1
Re: ***Show us your 3000 Series GPU*** 2021/02/10 19:50:13 (permalink)



#262
Clovis559
SSC Member
  • Total Posts : 563
  • Reward points : 0
  • Joined: 2020/09/18 13:53:08
  • Status: offline
  • Ribbons : 3
Re: ***Show us your 3000 Series GPU*** 2021/02/10 21:37:37 (permalink)

#263
Dabadger84
CLASSIFIED Member
  • Total Posts : 3426
  • Reward points : 0
  • Joined: 2018/05/11 23:49:52
  • Location: de_Overpass, USA
  • Status: offline
  • Ribbons : 10
Re: ***Show us your 3000 Series GPU*** 2021/02/10 22:23:38 (permalink)
O_o I've created a monster. lol

ModRigs: https://www.modsrigs.com/detail.aspx?BuildID=42891  
Specs:
5950x @ 4.7GHz 1.3V - Asus Crosshair VIII Hero - eVGA 1200W P2 - 4x8GB G.Skill Trident Z Royal Silver @ 3800 CL14
Gigabyte RTX 4090 Gaming OC w/ Core: 2850MHz @ 1000mV, Mem: +1500MHz - Samsung Odyssey G9 49" Super-Ultrawide 240Hz Monitor
 
#264
GTXJackBauer
Omnipotent Enthusiast
  • Total Posts : 10323
  • Reward points : 0
  • Joined: 2010/04/19 22:23:25
  • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
  • Status: offline
  • Ribbons : 48
Re: ***Show us your 3000 Series GPU*** 2021/02/12 10:31:29 (permalink)
EVGATech_DanielM
Some cool builds 
 

 
They sure are. 

 Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
LMD3DNZM9LGK8GJ
#265
Gotspeed_2000
SSC Member
  • Total Posts : 818
  • Reward points : 0
  • Joined: 2021/01/07 18:53:17
  • Status: offline
  • Ribbons : 5
Re: ***Show us your 3000 Series GPU*** 2021/02/13 21:51:19 (permalink)
Here is my build.

post edited by Gotspeed_2000 - 2021/02/13 21:55:38

Corsair 1000D Obsidian Case
I9 13900K with EK Velocity 2 Block
ASUS 4090 Strix with Optimus Block
ASUS Hero Z690 Mobo
64GB DDR5 RAM Trident 6000Mhz 
1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive
EVGA 1600 Watt PSU
30 Lian Li AL120 fans
2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with
Two EK Pump/res combos.  Custom hard tube loop.  
Samsung G7 32" Monitor
EVGA Z20 Keyboard
Glorious Model O
#266
CyberSparky
Superclocked Member
  • Total Posts : 206
  • Reward points : 0
  • Joined: 2012/03/13 02:23:40
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/13 21:55:03 (permalink)
Finally installed my waterblock and replaced my pump. 
 


CPU: AMD Ryzen 5900x
MB: Gigabyte x470 Gaming 7 Weefee
RAM: 32GB Trident Z Royal @ 3733CL14- IF-1883
GPU: EVGA RTX 3080 XC3 @ 2115 EK Vector XC3 
PSU: EVGA 1600w G2
OS: Windows 10 20H2
"Do unto others as you would have them do unto you."
"Be the change in the world you wish to see"
                            Gandhi

 
#267
Gotspeed_2000
SSC Member
  • Total Posts : 818
  • Reward points : 0
  • Joined: 2021/01/07 18:53:17
  • Status: offline
  • Ribbons : 5
Re: ***Show us your 3000 Series GPU*** 2021/02/13 21:59:28 (permalink)
Here is my build.  It took me a bit to figure out the loading of the picture.  
 
" />
post edited by Gotspeed_2000 - 2021/02/13 22:04:26

Corsair 1000D Obsidian Case
I9 13900K with EK Velocity 2 Block
ASUS 4090 Strix with Optimus Block
ASUS Hero Z690 Mobo
64GB DDR5 RAM Trident 6000Mhz 
1TB Nvme primary /2*2TB Nvme secondary/1tb & 2TB SSD drive
EVGA 1600 Watt PSU
30 Lian Li AL120 fans
2 * 480mm medium thickness rad, 2 * 360mm medium thickness rad, with
Two EK Pump/res combos.  Custom hard tube loop.  
Samsung G7 32" Monitor
EVGA Z20 Keyboard
Glorious Model O
#268
usbarlow@hotmail.com
Superclocked Member
  • Total Posts : 104
  • Reward points : 0
  • Joined: 2006/05/23 23:05:27
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/14 20:23:14 (permalink)
Sitting here with my envy.
#269
olaf_r
New Member
  • Total Posts : 13
  • Reward points : 0
  • Joined: 2020/11/21 02:10:21
  • Status: offline
  • Ribbons : 0
Re: ***Show us your 3000 Series GPU*** 2021/02/16 08:31:05 (permalink)
my EVGA 3090 build

Lian-Li PC-O11DX Dynamic XL Carbon Mod
Riser Kabel 4.0 LinkUp
8* Alpenföhn 120mm Wing Boost 3 ARGB PWM-Fan
1* Zalman 120mm Zalman SF120 Fan
2* ROG LED Stripes
1200 Watt be quiet! Dark Power Pro 12 1200W
Ryzen 5950X
EK-AIO Elite 360 D-RGB  EKWB    
Gigabyte x570 xtreme
G.SkillTrident Z Royal DDR4-3600MHz CL14-15-15-35 1.45V 64GB (4x16GB)
1* Gigabyte Aorus NVMe SSD, PCIe 4.0 M.2 Typ 2280 - 2 TB
2* Gigabyte Aorus NVMe SSD, PCIe 4.0 M.2 Typ 2280 - 1 TB
2TB SSD SanDIsk Plus
EVGA GeForce RTX 3090 FTW3 ULTRA GAMING
EVGA Hybrid KIT 3090 FTW3

(KingPin should arrive in the next 2 Days...)
 
 
 
 
 
 
 
post edited by olaf_r - 2021/02/16 08:37:44
#270
Page: << < ..678910.. > >> Showing page 9 of 30
Jump to:
  • Back to Mobile