jlp209

sammaza421
https://www.reddit.com/r/sffpc/comments/knn1vw/evga_3080_ftw3_ultra_in_a_lian_li_tu150_baby_blu/
 
Just wanted to share that my 3 month watch has ended :) 7700K @ 4.9Ghz16GB 3200 DDR4EVGA 3080 FTW3 UltraSeasonic SX800-LTI SFX-L PSUAdded these feet to the case : https://www.amazon.com/gp/product/B0819G7R12/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1Timespy record run : https://www.3dmark.com/3dm/55168304 

 


Temps are so low with the bottom fans using the EVGA 4-pin aux fan header on the card. It's a really nice addition that you don't see from too many cards. They just match the gpu fanspeed and pull cold air up to the card as temps go up. The rear is a Noctua iPPC-3000 RPM \ Heavy Duty Cooling Fan so it can dump heat out very well. The front rad is using a 2000rpm pull fan to always have external cool air coming in over the rad. These 2 fans (front\rear) are linked via a y splitter so they share the same pwm fanspeed value from the mobo (cpu).Mostly playing Star Wars Squadrons on Steam in VR using a Samsung O+ and Tflight Hotas Xone The experience has been epic to say the least. I think I can take on the whole empire myself lol. I have loved watching the 3080 builds on here so just wanted to share mine! Thanks all!Sorry for the bad pics!
 
 
 

Nice to see a fellow TU-150 owner! Nice build. I previously had a 2080 Ti FTW3 Ultra and opted for "only" a dual slot 3090 this time so that I could install 2x Noctua A12x15mm low profile fans inside the bottom of the case. As you've stated, adding 2x intake fans at the bottom of this case right beneath the GPU makes a world of difference. My GPU temps haven't exceeded 75 degrees so far in anything I've thrown at it. 

Nice to be able to keep those fans on the inside with the 2 slot though.. I like the silver color.  Did you get the glass or metal side panel?

gt5759
Couldn't be happier with my 3090 xc3 hybrid.

What a beast of a GPU.  

Thanks for sharing.  

 
Nice!
 

Love my new case:
 

 

Clean case, btw that card BEAST!

Feklar
My 3090 FTW3 happily swimming under water.

 

Nice custom rig.  

http://imgur.com/E2q2unc

Ascalaphus
Love my new case:
 

 

Same case. Here is mine before and after Hybrid. I kind of like the before look better but decided to match the red accent and with the case being so dark, you kind of need some RGB to see anything inside and yellow RGB looked awful on the card.  I still need to figure out my PCIe cables. The pump hose wouldn't fit properly if I came up from the bottom. 
 

Rbk_3

Ascalaphus
Love my new case:
 

 

Same case. Here is mine before and after Hybrid. I kind of like the before look better but decided to match the red accent and with the case being so dark, you kind of need some RGB to see anything inside and yellow RGB looked awful on the card.  I still need to figure out my PCIe cables. The pump hose wouldn't fit properly if I came up from the bottom. 
 

I'm not going to lie, but the layout and overall look with Noctua and the org. cooler looks better

The rad is living in an ice bucket now until I can work out how to strip it down to add a chiller to it.
Took the back screws out but it doesn't seem to want to come apart.
 

I think I finally found a way to truly, adequate show just how thicc this case is:
 

 
That's a 280mm AIO radiator SIDEWAYS (yes, both doors close, no, they are not touching it when they're closed), and a Kingpin 360mm AIO in front of it.  I might end up going Push/Pull on the Kingpin radiator later... swapped out the fans, the stock ones are pretty garbage, EK Vardars should do the trick :-P.
 
I can't wait until I get an open loop setup for the CPU so I don't have to have such a jerryrigged setup anymore.

Here's my 3090 FTW3...
 

 

 

 

notmyidea

TwoEvilOne

 
Those analog gauges look like they belong there! Surprisingly awesome.